Access Official Technical PDF

Share Summary:LinkedInEmail

EV charging is one part of a broader power-electronics system that connects the electrical supply, vehicle battery and auxiliary loads. For engineers and system designers, charger selection is only one consideration: onboard conversion, thermal management, electrical protection and packaging also shape how power is delivered and used. A product portfolio described by Shindengen illustrates how these technologies fit together across charging infrastructure and vehicle electronics.

EV charging infrastructure: wired and wireless approaches

High-output DC quick chargers provide energy directly to a vehicle’s battery system. The catalog describes a charger family compatible with CHAdeMO protocol Revision 1.2, with a maximum rated output of 90 kW and the ability to charge two vehicles simultaneously. In multi-vehicle operation, the charger allocates output between vehicles to support charging according to demand.

Infrastructure decisions also involve the installation environment and operating requirements. The listed charger features include outdoor protection, lightning protection, noise-reduction measures and functions for setting charging conditions. Communication-network-compatible models can support user authentication, payment services and access to charger information through a connected service. These functions matter to integrators planning charging equipment as part of a monitored, managed installation.

AC charging equipment provides another option for EVs and plug-in hybrid vehicles. The described wall-mounted charger is designed for outdoor installation and includes connector locking, user authentication and electrical protection functions. These features show how the charger interface combines power delivery with access control and safe operation.

Wireless charging for EVs

Wireless charging transfers energy through electromagnetic coupling between a ground-side transmitting coil and a receiving coil on the vehicle. The vehicle can charge while parked over the ground assembly, eliminating the need to connect a charging cable. The source describes the system as tolerant of increased coil separation and position misalignment, characteristics relevant to practical vehicle parking and installation layout.

The catalog presents wireless charging as a technology under development, with stated power ratings and compatibility targets subject to change. As with any developing system, final design decisions require confirmation against current technical specifications and applicable standards.

Onboard power conversion in electric vehicles

Charging infrastructure supplies energy, but onboard converters condition and distribute it for vehicle use. An onboard charger converts commercial AC power into DC power suitable for charging a high-voltage battery. The described design uses power-factor correction and an LLC soft-switching circuit, with digital control intended to manage power conversion and communication with the vehicle’s electronic control unit.

DC/DC converters serve a different role: they convert energy from a high-voltage battery to the lower voltage required by vehicle electrical systems and low-voltage batteries. Isolation, conversion efficiency, size and weight are important design considerations as vehicle electrical loads and packaging constraints increase. The catalog also describes air- and water-cooling options for different converter designs.

DC/AC inverters convert high-voltage battery power into AC output. In the vehicle application described, the inverter can provide a sine-wave supply for external loads, including uses that require substantial startup power. Parallel operation of multiple units is presented as one way to increase available output for external power supply applications.

Power semiconductors, protection and thermal design

Power devices are the building blocks behind chargers, converters and inverters. MOSFETs, diodes, thyristors and power modules switch or rectify electrical energy, and their characteristics influence losses, current handling and heat generation. The source highlights several packaging approaches, including copper-clip connections intended to increase current capacity and packages designed to improve heat dissipation while reducing size.

Next-generation devices such as silicon carbide (SiC) and gallium nitride (GaN) can support power-conversion designs aimed at higher efficiency and smaller equipment. However, the source notes a practical design challenge: their high slew rates can make device integration more demanding. Modularizing basic circuits is presented as an approach to make these devices easier to handle in end equipment.

Thermal management is closely linked to packaging. Single- and double-sided heat-dissipation structures offer different approaches to removing heat, while compact module layouts can reduce mounting area. Engineers must assess the complete assembly—including device, package, cooling method and surrounding system—rather than selecting a semiconductor from electrical ratings alone.

Protection against reverse connection and reverse current is another system-level concern. Conventional diode protection can cause voltage drop and heat generation. The catalog describes low-loss MOSFET-based devices and gate-driver approaches intended to reduce these effects, particularly in vehicle electronic control units where power consumption and heat are important constraints.

What engineers should consider when specifying EV power systems

Choosing charging and vehicle power components requires attention to how the equipment will operate as a complete system. Relevant considerations include:

  • Power path: Identify whether the application requires AC charging, DC fast charging, onboard AC/DC conversion, DC/DC conversion or DC/AC output.
  • Installation conditions: Confirm environmental protection, cooling approach, mounting location and operating-temperature requirements from current product documentation.
  • Control and communications: Check required vehicle interfaces, charging protocols, monitoring functions and authentication arrangements.
  • Protection and thermal behavior: Review electrical protection, heat dissipation and the effects of switching-device and package selection on the overall design.
  • Specification status: Distinguish production specifications from products or features identified as under development, and verify current details before procurement.

Conclusion

EV charging depends on a coordinated chain of infrastructure and onboard power electronics. Chargers deliver energy to the vehicle, while onboard converters and inverters adapt that energy for battery charging and electrical loads. Semiconductor selection, protection, cooling and packaging influence how these systems are integrated. For automation and electrical engineering teams working on vehicle or charging projects, the practical priority is to evaluate the full power path and confirm every component against current specifications, operating conditions and system requirements.

Access Official Technical PDF

About The Author