An EV traction inverter platform combines power electronics, embedded control and functional safety mechanisms to convert battery energy into controlled motor torque. For engineers and system integrators, evaluating these elements as a connected system—not as isolated components—is essential to understanding how an inverter design can support an electric drivetrain and be adapted to a vehicle application.
A reference platform described by NXP in 2018 illustrates this system-level approach. It was designed around a 400 V supply and a 100 kW, three-phase motor-inverter application, with hardware, software and safety enablement intended to support development and customization. Its specific components and details reflect that platform, but the underlying design considerations remain useful when assessing inverter architectures.
What an EV traction inverter platform must do
The inverter converts high-voltage DC from the vehicle battery into multiphase AC for the traction motor. A DC-link capacitor sits between the battery and the inverter switching stage, while power switches—IGBTs in the platform described—control the energy delivered to the motor phases. The controller uses measurements and motor-position information to determine how the switches should operate.
That chain links power conversion with real-time control. The platform material identifies battery voltages from 300 V to 800 V as typical for the broader application landscape, and notes that traction inverter power requirements can range from about 80 kW to more than 200 kW. These are application ranges, not specifications for every design. Voltage, current, motor type, packaging and operating requirements must be considered together when selecting or adapting a platform.
Control hardware, sensing and communication
The reference design brings together a motor-control microcontroller (MCU), a safety system basis chip (SBC), isolated IGBT gate drivers and a CAN interface. In the specified platform, the MPC5775E MCU handles control tasks, including motor-control functions and software-based resolver processing. The FS65 SBC monitors the system and provides safety-related functions, while GD3100 gate drivers interface with the IGBT power module. A CAN transceiver provides a vehicle-network connection, with redundant CAN identified as a platform feature.
These components perform distinct but coordinated roles:
- MCU: Processes control inputs and measurements, then generates commands for inverter operation. The cited MCU includes lockstep processing and an eTPU intended to support motor-control tasks.
- SBC: Monitors the MCU and power conditions and contributes to defined fail-safe behavior.
- Gate driver: Translates control signals into gate-drive actions and provides protection and monitoring functions for the IGBTs.
- Sensors and interfaces: Supply current and rotor-position information and support communication with vehicle control systems.
The platform’s stated target was to drive a 100 kW, three-phase motor from a 400 V supply. Its prototype control targets included continuous current above 200 A RMS and peak current above 400 A RMS. These figures describe the prototype target, not a guarantee of performance in a different inverter or vehicle integration.
Functional safety must be designed into the system
In an electric drivetrain, inverter faults can affect vehicle motion. Safety analysis therefore considers potential hazards in terms of severity, exposure and controllability, then defines safety goals and requirements for the system. Examples in the platform material include unintended torque, unintended wheel speed and loss of torque while driving.
Those goals need to be translated into technical requirements for each relevant functional block. For example, the design must address how command inputs are checked, how current and position measurements are assessed, how faults are detected, and what response brings the system to a defined safe state. A safety concept is not simply a list of certified components: it also depends on their integration, diagnostic coverage, software behavior and system-level fault response.
The platform describes several layers of protection. The gate driver provides fast over-current protection and IGBT monitoring; the MCU and SBC support fault detection and safety processing; and safety software is intended to help manage fault reactions. Redundant signal paths and monitoring features support the broader safety architecture. The source identifies ASIL-D-oriented hardware and safety enablement, but the applicable safety level and evidence for a production system depend on the vehicle’s safety goals and the complete implementation.
Why software and enablement materials matter
Hardware alone does not make a reference design straightforward to integrate. The described platform included motor-control APIs, driver software and safety libraries, along with documentation such as block diagrams, schematics, layouts, application notes and a performance report. Safety materials included a safety case manual and component and interoperability FMEDA information. The offering also described proof-of-concept software, user guides and development tools.
For a development team, these resources can provide a starting point for evaluating interfaces, understanding safety assumptions and organizing implementation work. They do not remove the need to validate the design in its intended vehicle architecture. Teams still need to assess motor characteristics, inverter packaging, calibration, communications, thermal and electrical integration, and the behavior of the complete system under relevant fault conditions.
Plan for application-specific adaptation
A reference platform may need changes as vehicle requirements evolve. The roadmap discussed in the source included higher-voltage systems, silicon-carbide MOSFETs, alternative IGBT modules, dual-motor control and six-phase motor control. These possibilities highlight why platform selection should account for both current requirements and likely architectural changes. They are roadmap considerations, not features established for the original 400 V design.
Customization can also extend beyond component choice. Motor calibration, control software, packaging and integration with the rest of the electric drivetrain all influence the final application. The source describes engineering support that could include design adaptation, safety activities, calibration and dyno or hardware-in-the-loop testing.
Conclusion: evaluate the complete inverter system
An EV traction inverter platform is most useful when its power stage, control hardware, sensing, communications and safety mechanisms are considered together. For technical decision-makers, the practical task is to map the platform’s documented capabilities and assumptions against the intended motor, voltage, power, vehicle architecture and safety goals. Treating a reference design as an engineering starting point—then validating and adapting it for the application—helps keep integration decisions grounded in system requirements.