Access Official Technical PDF

Share Summary:LinkedInEmail

An explosion-proof static var generator (SVG) can address several connected power quality challenges in underground mines: low power factor, voltage fluctuation and harmonic distortion. Long power-supply routes and changing loads can make it difficult to maintain suitable voltage at mine equipment while limiting electrical stress on cables and transformers. An SVG provides dynamic compensation by controlling reactive current in parallel with the grid, with equipment designed for the mine environment.

For engineers and operations teams, the key is understanding what the device does, where it can be connected and how its compensation capacity relates to the electrical system. Those factors help determine whether an SVG is a suitable element of a broader underground power-quality strategy.

Why mine power systems need dynamic compensation

Underground distribution networks may have long transmission distances between a supply point and equipment at the working face. Voltage at the load end can therefore fluctuate as operating conditions change. Heavy or variable loads also draw reactive power, which can reduce power factor and increase current in lines, cables and transformers.

Nonlinear loads can introduce characteristic harmonics into the power system. These distortions affect the supply waveform and can influence connected electrical equipment. Reactive power, voltage and harmonics are related power-quality concerns, but they are not identical problems. A compensation system should be assessed against the conditions measured at the intended connection point.

How an explosion-proof static var generator works

An SVG uses a self-commutated bridge circuit built with insulated-gate bipolar transistors (IGBTs). Connected in parallel to the grid through reactors, it adjusts the bridge output voltage or controls its AC-side current. This allows it to generate or absorb reactive current as operating conditions require.

When the system needs capacitive reactive power, the SVG supplies it; when inductive compensation is needed, the device absorbs reactive power. The control system can change its output in response to load conditions, rather than relying only on fixed compensation. The product information describes system response of up to 5 ms, although actual performance should be evaluated in the context of the application and configuration.

Because the SVG operates as a controlled current source, it can also be configured to compensate selected harmonic currents. The described equipment targets the 5th, 7th, 11th and 13th characteristic harmonics. Its stated harmonic compensation capability varies by harmonic order and rated capacity, so engineers should check the relevant equipment data and site requirements rather than assume the same capability for every harmonic.

Potential benefits for underground power quality

Power factor and current management

By compensating reactive power automatically, an SVG can improve power factor and reduce the reactive component of line current. The product information specifies a power factor above 0.95 within the compensation capacity range. The actual result depends on the system load and the selected compensation capacity.

Voltage support at the load end

Where long underground feeders contribute to low or fluctuating terminal voltage, dynamic reactive power compensation can provide voltage support. The SVG can adjust its output as conditions change, helping maintain voltage within the required range. This may be relevant when loads start, stop or vary during production.

Harmonic compensation

For systems affected by nonlinear loads, the SVG can be set to compensate specified harmonic currents as well as reactive power. This combined function can help improve the power waveform at the connection point. Assessment should include the harmonic profile, load behavior and the capacity allocated to compensation.

Installation and configuration considerations

The described product range includes mine flame-proof and intrinsically safe equipment for 660 V, 1,140 V, 3.3 kV, 6 kV and 10 kV systems. Listed compensation capacities vary by model, from hundreds of kVar for lower-voltage units to several MVar for higher-voltage equipment. These figures are product options, not a recommendation for a particular mine.

System designers can consider different connection strategies according to the distribution layout and the location of the power-quality problem:

  • Centralized compensation: Install compensation at a central point in the mine power system.
  • Regional compensation: Address conditions within a distribution area or mine section.
  • Local compensation: Place compensation closer to the equipment creating or experiencing the issue.

Single units may also operate in parallel, and SVG equipment may be coordinated with existing reactive power compensation devices. The appropriate approach depends on measured conditions and the electrical design. Site teams should verify voltage class, capacity, installation location, cooling requirements and protection needs before selecting equipment.

The product information describes heat-pipe air cooling for low-voltage equipment and an isolated internal/external water-cooling arrangement for certain high-voltage units. It also lists protection functions such as overcurrent, overvoltage, undervoltage, phase loss, communication interruption and IGBT overtemperature. Configuration and protection details should be confirmed for the specific model and mine application.

What reported mine applications illustrate

Two examples in the product information show different use cases. In one low-voltage application, a long feeder served mine equipment experiencing substantial voltage fluctuation. The reported SVG installation provided voltage support and helped stabilize voltage at the terminal during operation. In a separate high-voltage application, an SVG installed on a 3.3 kV system was reported to increase power factor from approximately 0.5 to 0.99 and reduce line current. These are reported site outcomes, not guaranteed results for other installations.

The examples underline why application engineering matters: one system may primarily need voltage support, while another may require reactive power and harmonic compensation. Baseline measurements and clear operating objectives are essential for evaluating the right solution.

Conclusion

An explosion-proof static var generator combines dynamic reactive power compensation with voltage support and, where configured, harmonic current compensation. In underground mines, these functions can help address low power factor, feeder voltage fluctuation and selected harmonics. Engineers should base selection on measured site conditions, system voltage, compensation capacity, installation point and the required protection and cooling arrangements. Treating the SVG as part of the overall distribution system—not as a standalone fix—supports a more practical approach to mine power quality.

Access Official Technical PDF

About The Author