Access Official Technical PDF

Share Summary:LinkedInEmail

FACTS devices—flexible AC transmission system controllers—give power system operators tools to adjust voltage, reactive power and power flow. For industrial facilities, these controls matter because voltage sags, interruptions, harmonics and other disturbances can disrupt drives, PLCs, process controls and production equipment. Understanding the disturbance and the electrical conditions behind it is an important first step in selecting an appropriate mitigation strategy.

Power quality describes how closely the electricity supplied to equipment meets its expected voltage and frequency conditions, including a stable, balanced waveform. In practice, system variations and faults mean supply is not always ideal. Semiconductor-based loads, including adjustable-speed drives and switched-mode power supplies, can also draw nonlinear current, contributing to harmonics and reactive power demand.

Power quality disturbances that affect industrial loads

Power quality problems take different forms, and their effects depend on both the event and the equipment exposed to it. Voltage sags, also called dips, are temporary reductions in RMS voltage. They can result from network or facility faults, or from starting large motors and connecting heavy loads. Sensitive controls may malfunction, contactors may drop out, and a process may stop.

Interruptions range from brief losses of supply during protective-device operation to longer outages caused by equipment failure, storms or other line damage. Even a short interruption can affect data processing equipment and drives that are not prepared for the event. Other disturbances include:

  • Voltage swells and spikes: Increases in voltage, either momentary or very brief, that can cause equipment malfunction, data errors or damage to electronic components and insulation.
  • Harmonic distortion: Non-sinusoidal voltage or current containing frequency components at multiples of the power-system frequency. Nonlinear loads such as converters and drives can contribute to this condition.
  • Voltage fluctuation: Repeated variation in voltage that can cause visible flicker and affect sensitive processes.
  • Noise: High-frequency signals superimposed on the power waveform, which may disturb electronic equipment or cause data errors.
  • Voltage unbalance: Unequal phase-voltage magnitudes or phase-angle relationships in a three-phase system, with potential adverse effects on three-phase loads such as induction motors.

These events should not be treated as interchangeable. A voltage-control solution, for example, does not by itself address every source of harmonic distortion, noise or interruption. Measuring and identifying the disturbance helps engineers distinguish a supply-side event from a load-related issue and assess what type of control may be suitable.

How FACTS devices support power quality and stability

FACTS controllers use power-electronic or thyristor-based control to influence conditions in AC transmission systems. Depending on the device, they can regulate voltage, provide or absorb reactive power, or adjust transmission-line power flow. Their rapid and flexible control can support voltage stability and system operation, particularly where network loading and disturbances challenge conventional control methods.

FACTS installations are generally applied to transmission-system needs rather than as a universal remedy for every disturbance inside a plant. Their relevance to industrial power quality lies in the way transmission voltage and stability conditions affect the supply delivered to users. Device selection and placement depend on the network problem and the control objective.

Three FACTS controllers and their roles

Static VAR compensator (SVC)

An SVC is a shunt-connected device that regulates voltage by controlling reactive power. It can use thyristor-controlled reactors to absorb reactive power under capacitive conditions, or capacitor banks to supply reactive power under inductive conditions. By adjusting reactive compensation, an SVC supports voltage regulation. It may also be installed near rapidly varying loads, such as arc furnaces, to help smooth voltage flicker.

Static synchronous compensator (STATCOM)

A STATCOM is also a shunt-connected voltage-control device, but it uses a voltage-source converter to control reactive power exchange with the AC system. When system voltage is low, it can inject reactive power; when voltage is high, it can absorb reactive power. It can operate in voltage-regulation mode or maintain a specified reactive-power output, depending on the control objective.

Compared with an SVC, a STATCOM’s reactive-power output changes differently as system voltage falls. This can allow it to provide greater capacitive reactive support during low-voltage conditions. Its response characteristics and suitability must be considered alongside project requirements and cost.

Unified power flow controller (UPFC)

A UPFC combines series and shunt converter functions linked by a DC connection. This arrangement can control multiple transmission parameters, including bus voltage, line impedance and phase angle, either selectively or together. It can therefore regulate real and reactive power flow in a line as well as support voltage control. This broader functionality makes the UPFC a flexible option for transmission-flow management, while also making its application more complex than a single-purpose voltage controller.

Match the controller to the measured problem

Choosing a FACTS solution starts with defining what needs to be controlled. A voltage-regulation requirement may point toward an SVC or STATCOM, while a need to manage several power-flow parameters may call for consideration of a UPFC. These devices differ in connection arrangement, control method and function, so they should not be ranked as interchangeable options on the basis of a single general comparison.

For plant and utility teams, a practical evaluation should connect the observed event to its likely source and operational consequence. Useful questions include:

  • Is the principal issue a voltage sag, recurring fluctuation, unbalance or another disturbance?
  • Does the problem originate on the transmission or distribution network, or within the facility?
  • Which loads and processes are affected, and what are their tolerance requirements?
  • Is the objective voltage regulation, reactive-power management, transmission-flow control, or a combination?

Power quality monitoring, event detection and visualization are essential to this assessment. Without a clear record of disturbances and operating conditions, it is difficult to identify the source or determine whether a proposed control addresses the actual problem.

Conclusion

FACTS devices provide flexible ways to influence voltage, reactive power and power flow in AC systems. SVCs and STATCOMs focus on shunt reactive-power and voltage control, while UPFCs offer broader control of transmission parameters. For industrial decision-makers, the practical priority is to measure and classify power quality events, understand which loads are affected, and align the selected control with the diagnosed system need. That approach helps place FACTS technology within a broader, evidence-based power quality strategy.

Access Official Technical PDF

About The Author