FeSi nanowire ferromagnetism has attracted interest because magnetic semiconductors could support spin-based electronic devices. However, reports of magnetism in FeSi nanostructures have not been consistent, and measurements on collections of as-grown wires can make it difficult to identify the response of an individual nanowire. Single-wire measurements of FeSi and manganese-doped FeSi (FeMnSi) provide evidence of ferromagnetic domains at room temperature and help clarify the materials’ structural, electrical and magnetic behavior.
Why examine FeSi as a nanowire?
Bulk FeSi is a semiconductor in the transition-metal silicide family and is not generally characterized by the low-temperature magnetic states reported for some related silicides. At the nanoscale, however, a material’s magnetic properties can differ from those of its bulk form. The nanowire geometry, including its surface and shape, may influence magnetic behavior.
This distinction matters when evaluating FeSi for potential spintronics applications. Earlier work had reported room-temperature ferromagnetism in FeSi and Mn-doped FeSi nanowires, while other measurements described FeSi as paramagnetic. The low remanent magnetization and use of samples containing many as-grown wires contributed to uncertainty. Measurements on individual wires offer a more direct way to examine whether the magnetic signal is associated with the nanowire itself.
Nanowire growth and material structure
FeSi and FeMnSi nanowires were synthesized by chemical vapor deposition using vapor transport. The precursor reacted with a silicon substrate to form the wires. Adding manganese chloride during growth produced the doped material.
Structural characterization identified crystalline nanowires with the cubic B20 structure. X-ray diffraction and electron microscopy supported the identification, while energy-dispersive X-ray spectroscopy confirmed manganese in the doped samples at approximately 1% concentration. The wires had diameters beginning at about 25 nm and were covered by a native silicon oxide layer. The reported observations also supported growth through a vapor-solid mechanism, rather than growth initiated by metal catalysts at the wire tips.
Electrical measurements were consistent with semiconducting behavior. FeSi conductivity was thermally activated, and the measured Seebeck coefficient of an FeMnSi nanowire was positive at 310 K, indicating p-type behavior in that temperature range. These transport results provide context for the magnetic measurements: the materials exhibit semiconductor characteristics alongside their observed magnetic response.
Evidence for room-temperature magnetism
Imaging individual wires
Magnetic force microscopy (MFM) at room temperature showed magnetic contrast on individual FeSi and FeMnSi nanowires. The contrast was consistent with a two-domain magnetic structure and magnetization oriented perpendicular to the nanowire growth axis. The measured magnetic configuration was also considered in relation to the wires’ diameters and shape anisotropy.
MFM detects forces between a magnetically coated probe and the sample’s stray field. Its images therefore provide spatial information about magnetic structure, rather than only a bulk average across a sample. In this work, imaging individual wires helped distinguish the response of the nanowires from a signal that might otherwise be attributed to other material in the sample.
Quantifying the magnetic signal
Off-axis electron holography provided a separate measurement of the remanent magnetic state in a single FeMnSi nanowire. By comparing phase images acquired with opposite magnetization directions, the analysis isolated the magnetic contribution from electrostatic and crystalline effects. The resulting phase shift was used to estimate the magnetic induction and the magnetic moment per iron atom. The reported moment was approximately 0.65 Bohr magnetons per iron atom for the measured FeMnSi wire.
Measurements on as-grown samples also showed room-temperature remanent magnetization for both materials. The reported values were 1.5 × 10-5 emu for FeSi and 0.5 × 10-5 emu for Mn-doped FeSi. These figures describe the measured samples; they should not be treated as universal values for every nanowire or fabrication process.
What the calculations suggest about the magnetic origin
Spin-polarized density functional theory calculations indicated that iron atoms near the nanowire surface make a major contribution to the magnetic moment. The proposed explanation is that under-coordinated surface atoms and interactions involving charge carriers and dangling bonds support the magnetic response. This interpretation is consistent with the experimental observation of magnetism in crystalline wires, rather than requiring small iron-silicide precipitates as its source.
For FeSi, calculations using a slab model and the mean-field approximation estimated a Curie temperature of 417 K. The study also calculated a magnetic moment range of approximately 0.4–1.3 Bohr magnetons for surface iron atoms. For Mn-doped FeSi, calculated Curie temperatures depended on manganese position, and some estimates were higher. The authors caution that the mean-field approximation can overestimate Curie temperature, so these theoretical values are estimates—not direct measurements of operating limits.
Low-temperature measurements showed spin-freezing behavior in the doped nanowires, reported around 30 K. The observations at low temperatures require care: the study notes that limited thermalization and the absence of complementary AC susceptibility measurements leave aspects of the low-temperature behavior unresolved.
Practical implications
For materials and device teams, the main finding is that FeSi nanowires and Mn-doped FeSi nanowires can exhibit room-temperature ferromagnetism at the individual-wire level while retaining semiconducting transport characteristics. The combined use of MFM, electron holography, structural analysis and computation provides a stronger basis for interpreting the response than a bulk magnetic measurement alone.
The results establish a materials research direction, not a ready-made device specification. Magnetic behavior may depend on nanowire dimensions, surface structure and, in the doped material, manganese location. Further characterization would be needed to determine how consistently these properties can be controlled and how they translate into device performance. For engineers assessing nanoscale magnetic semiconductors, the practical takeaway is to evaluate structure, transport and magnetism together—and to distinguish direct measurements from computational estimates.