Flexible CHP systems could extend combined heat and power beyond large industrial sites. By producing electricity and useful heat for a host facility while responding to grid needs, these systems may offer small and mid-sized manufacturers another way to manage energy and participate in grid support. Making that possible requires power electronics and controls that can coordinate CHP operation with changing grid conditions.
A project led by the University of Tennessee, Knoxville, set out to develop a megawatt-scale, modular, transformer-less power conditioning system (PCS) based on silicon carbide (SiC), together with a controller for flexible CHP applications. Its design addresses the electrical interface between CHP sources, facility loads, and the grid.
Why flexible CHP systems matter
CHP systems supply both electricity and heat to a facility. Large installations, typically above 20 megawatts of electrical capacity, have found a place at major industrial sites where economies of scale and on-site technical expertise support deployment. Smaller manufacturing facilities represent a further opportunity, particularly where both electrical and thermal loads can make CHP useful.
Grid needs add another dimension. As intermittent renewable generation becomes a larger part of electricity supply, grid operators need dispatchable resources: generation that can be called on when required. A flexible CHP installation could serve its host while also providing grid services, including additional generating capacity during peak demand and voltage regulation.
These potential benefits depend on a system’s ability to integrate reliably with the grid. It must respond to grid conditions, satisfy applicable interconnection requirements, and support different operating modes. The proposed PCS and controller are intended to address those needs without relying on a conventional 60 Hz transformer.
How the SiC-based power conditioning system works
The PCS is designed as a four-wire DC/AC system that can serve both three-phase and single-phase loads. Its transformer-less arrangement is intended to reduce the size and weight associated with a 60 Hz transformer, while its modular architecture is intended to support scaling. Fast-switching SiC metal-oxide-semiconductor field-effect transistors (MOSFETs) are central to the converter design.
The converter is intended to do more than transfer power. The project targets grid-support functions such as low- and high-frequency ride-through and low- and high-voltage ride-through, along with responses to abnormal conditions including unbalance, faults, and overvoltage. The fast-switching devices are also intended to enable system-level functions such as harmonic filtering and stability enhancement.
These are important design goals, not automatic outcomes of selecting a particular semiconductor. The converter, its controls, and its connection to the wider CHP system must work together to meet performance and grid requirements.
Control is central to flexible operation
The accompanying CHP controller is designed for general-purpose controller hardware. Its role is to manage grid-support functions automatically and accommodate different fuels and operating modes. In practice, that means coordinating the CHP source and PCS as conditions change, rather than treating the converter as a stand-alone component.
The project identified several technical challenges for this control and power architecture:
- Meeting grid requirements while transferring automatically between operating modes, including management of a dynamic microgrid boundary to make effective use of available resources.
- Addressing IEEE P1547 interconnection requirements and IEEE P2030.7 specifications for microgrid controllers while achieving the desired performance.
- Managing circulating current ripple at switching frequency and circulating current at fundamental frequency when PCS converters operate in parallel.
These issues matter for system integrators and plant teams because they affect how a CHP installation behaves at the point of connection, during abnormal grid events, and as converter capacity is scaled.
From converter design to scalable testing
The project plan progressed from a single-converter design toward parallel operation. First, the team planned to design the PCS and controller around grid requirements and CHP integration. Next, it would build a 100 kW converter, construct a medium-voltage test platform, and demonstrate PCS functions. The controller was to be tested first in a hardware-in-the-loop (HIL) environment, then validated with a flexible CHP system in a grid-emulator hardware testbed.
A final phase focused on scalability. Two 100 kW PCS converter prototypes were planned to validate converter paralleling and the controller’s ability to manage the scaled system. The project milestones listed converter testing, HIL and grid-emulation validation, and construction of the medium-voltage platform among its planned work. The source describes the project as a three-year effort that began in late 2018.
The sequence reflects a practical engineering approach: verify converter functions at a smaller rating, test control behavior in simulated environments, and then examine how parallel units perform. For a modular system, current sharing and circulating currents become central concerns alongside the basic grid interface.
Potential industrial applications and value
The proposed application range includes CHP systems from 1 to 20 MW for small and mid-sized manufacturing facilities. Potential host sectors named for the technology include chemicals, food and beverage, plastics, and fabricated metals. The source also identifies medium-voltage motor drives and photovoltaic inverters as possible applications for related converter technology.
For host facilities, flexible CHP could combine on-site energy production with the ability to provide grid services. The project source cites a 2018 manufacturing-sector analysis for the U.S. Department of Energy that estimated widespread deployment of flexible CHP capable of grid services could produce approximately $1.4 billion in annual financial benefits in California alone. The estimated savings included lower facility energy bills, reduced grid operating costs, and added generation capacity that could alleviate the need for new centralized power plants. This is an estimate for broad deployment, not a guaranteed return for an individual facility.
Practical implications
For plant managers and technical decision-makers, the key takeaway is that flexible CHP depends on an integrated system: generation, power conversion, protection, and control must be designed to work together. SiC-based modular converters offer a route to transformer-less, scalable power conditioning, while dedicated controls are intended to help CHP respond to grid and operating requirements. Any deployment decision still depends on the facility’s electrical and thermal loads, grid conditions, and the ability of the complete system to meet applicable requirements.
If validated and commercialized, this approach could make CHP more useful to smaller industrial sites while enabling those facilities to contribute dispatchable capacity and other grid services. Its practical value will rest on demonstrated performance, reliable coordination, and a fit between system capabilities and the host plant’s operating needs.