Access Official Technical PDF

Share Summary:LinkedInEmail

Flexible printed electronics are bringing sensing, communication and interconnection functions onto substrates that can bend, fold or conform to a surface. For industrial automation, the significance is not simply that electronics can be printed. Additive manufacturing combined with nanomaterial inks offers new ways to build compact wireless sensor systems, adapt RF structures to their environment and integrate circuits on a wider range of substrates.

These approaches are relevant to engineers and system integrators evaluating connected equipment, distributed sensing and packaging constraints. Their practical value depends on how materials, substrate preparation and geometry work together—and on whether fabrication can be made repeatable at production scale.

How additive manufacturing changes electronics fabrication

Inkjet and three-dimensional (3D) printing create structures through layer-by-layer material deposition. Unlike subtractive processes such as milling, this approach can place conductive, dielectric and semiconductor materials where they are needed, potentially reducing material waste. Inkjet printing can also build multilayer structures by depositing different inks in sequence on substrates including paper, glass, semiconductor wafers and polymers.

Three-dimensional printing extends the design space beyond flat patterns. It can produce free-form structures, including interior cavities and meshes, that are difficult to make with conventional subtractive tools. Such geometries can be used to adjust a structure’s dielectric properties and support RF designs. The techniques described in the research include feature sizes in the nanometer range, with inkjet and 3D printing offering different resolutions and fabrication capabilities.

These advantages do not make additive processes interchangeable. Ink properties, substrate compatibility and the required geometry all influence which method is suitable. For RF components, the electrical behavior of the printed structure and its connections is as important as its shape.

Flexible printed electronics depend on the substrate

A functional ink must adhere to its substrate and form a reliable pattern. Kapton polyimide, for example, offers mechanical, electrical, thermal and chemical properties useful in flexible devices. Its surface, however, can make it difficult to deposit hydrophilic inks. That matters when a device requires both water-based sensing materials and organic-solvent-based conductive inks on the same film.

Surface modification can help address this compatibility challenge. The approaches described include building thin polyelectrolyte layers or depositing a complex made from heparin and protamine. These treatments adjust the surface so that both hydrophilic and hydrophobic inks can be printed, while using mild conditions intended to limit damage to the polyimide.

Once the surface is prepared, printed graphene-based materials can serve as sensing elements, while silver nanoparticle inks can form electrodes and conductive traces. Demonstrations included flexible gas sensors tested with nerve-agent simulants. Some devices retained electrical conductivity and morphology through repeated bending; other examples also passed a tape-peel test. These results illustrate why substrate treatment, ink selection and mechanical durability need to be considered together.

Printed sensors: material and geometry both matter

Sensor response depends not only on the sensing film but also on the electrode design and the interface between the two. One reported approach used semiconducting single-walled carbon nanotubes on Kapton, with inkjet-printed silver interdigitated electrodes. The silver electrodes were then converted into highly porous gold structures. The resulting sensors showed more than five times the sensitivity of sensors with dense silver electrodes in the reported DEEP-vapor comparison.

This example highlights an important design principle: changing electrode material and geometry can alter how a sensing structure performs. The work suggested that electrode properties, including contacts with the semiconducting nanotubes, may influence the sensing process. For automation applications, this means sensor development should evaluate the whole printed stack—not just the active material.

Foldable conductors and three-dimensional RF connections

Paper is an inexpensive, flexible substrate, but conductive traces on it can crack when folded, particularly after inks are cured. A printed approach to drill-less vias takes advantage of cellulose paper’s porosity: solvent-based silver nanoparticle ink penetrates the paper, and printing from both sides can create an electrical connection through its thickness. The printed conductor’s fiber-like structure can accommodate bending without readily breaking.

In a demonstrated substrate-integrated waveguide, the performance remained unchanged as the paper structure moved from flat to a curved configuration with a 10-mm radius. This points to potential uses in multilayer flexible RF assemblies, where conventional vias can add parasitic inductance and capacitance or become vulnerable to bending.

Printed traces can also cross fold lines in origami-inspired structures. A Miura-Ori frequency-selective surface used bridge-like features to let dipole elements curve as the structure folded, rather than forcing a sharp bend in the conductor. Its measured and simulated response showed more than 15% tunability, with the possibility of greater tuning through additional folds. The design demonstrates how mechanical shape can become a means of changing RF behavior.

From wireless skins to printed packaging

Printed wireless sensor systems can be chipless or semipassive. Chipless designs encode or communicate information through an RF response, while semipassive systems combine printed sensing and antenna structures with components such as integrated circuits and a power source. The reported examples include humidity and gas sensing, as well as systems designed for long-range wireless interrogation. Their capabilities depend on the specific architecture and should not be assumed for every printed sensor.

Additive manufacturing also offers options for RF packaging. Inkjet-printed silver nanoparticle conductors have been used on printed dielectric ramps to connect a packaging substrate with an integrated-circuit die. In a reported example, the interconnects had lower inductance than a typical wire bond, while maintaining RF performance at high frequencies. Combining inkjet printing with 3D printing can also create through-mold vias for connections across an encapsulant.

Practical implications for automation teams

For industrial teams assessing these technologies, the strongest opportunity is design flexibility: sensing, conductors and RF structures can be integrated on substrates or into shapes that conventional fabrication may not accommodate. But translating a demonstration into a robust product requires attention to ink and substrate compatibility, adhesion, bending behavior, RF performance and process repeatability.

Flexible printed electronics are therefore best viewed as an expanding manufacturing toolkit, not a universal replacement for established electronics processes. Nanomaterial inks enable new sensor and interconnect designs, while additive methods make complex and conformal structures feasible. For connected industrial systems, the practical next step is to match the fabrication approach to the operating environment and verify that the finished structure meets its mechanical, electrical and manufacturing requirements.

Access Official Technical PDF

About The Author