Access Official Technical PDF

Share Summary:LinkedInEmail

Fungal biorecovery offers a biological route for converting dissolved selenium and tellurium compounds into solid, potentially recoverable forms. In laboratory cultures, four fungi—Aureobasidium pullulans, Mortierella humilis, Trichoderma harzianum and Phoma glomerata—transformed soluble selenite and tellurite into deposits containing elemental selenium or tellurium. The results are relevant to industrial engineers and process developers assessing microbial approaches to metalloid removal, immobilization and resource recovery.

Selenium and tellurium are used in technologies including photovoltaic devices, semiconductors and alloys. They are often recovered as by-products of metal refining, while selenium- and tellurium-bearing waste streams can also present environmental concerns. Conventional extraction and treatment can be challenging, so microbial processing is of interest as a less chemically intensive alternative. The fungal study demonstrates a possible mechanism, but does not establish a ready-to-deploy treatment process.

How fungal bioreduction produces nanoparticles

The experiments examined fungi exposed to soluble oxyanions: selenite and selenate for selenium, and tellurite for tellurium. Most of the tested fungi grew in media containing 1 mM selenite or tellurite, although growth responses varied by species and compound. Growth was generally more limited at higher concentrations, and selenate was less broadly tolerated than selenite or tellurite.

As the fungi transformed selenite and tellurite, visible deposits appeared. Red coloration indicated formation of elemental selenium, while black deposits indicated elemental tellurium. Microscopy and material analysis confirmed that nanoscale particles formed both on fungal surfaces and in the surrounding culture medium. The hyphal network provided surfaces where particles could nucleate and accumulate.

Formation was not limited to elemental products. Selenium oxide was detected in association with T. harzianum, while tellurium oxide was found in products from T. harzianum and M. humilis. This matters for process assessment: the material produced may include more than one chemical form, so color alone is not enough to characterize a recovered product.

Fungal biorecovery depends on species and metalloid

The fungi did not respond uniformly. T. harzianum showed comparatively strong tolerance to selenite and tellurite in plate-based growth tests. Biomass-based measurements also indicated relatively high tolerance for M. humilis and T. harzianum. In contrast, A. pullulans and P. glomerata were more affected by some of the exposures. These differences show why a treatment organism cannot be selected based solely on whether it produces a visible precipitate.

In liquid cultures containing 1 mM tellurite, concentrations remaining in the supernatant after 30 days fell to about 0.09 mM for A. pullulans and M. humilis, and about 0.23 mM for T. harzianum. Selenite decreased from 1 mM to around 0.58 mM across the tested fungi over the same period. These measurements describe the specific laboratory conditions used; they should not be treated as predicted removal rates for industrial wastewater or other process streams.

Tellurium associated with biomass was higher than selenium for several of the fungi in the study, but the amount depended on the organism. This distinction has practical implications: dissolved oxyanion removal, metalloid accumulation in biomass and nanoparticle recovery are related but separate outcomes. A process evaluation would need to account for each rather than relying on a single measure of performance.

Why the fungal surface and extracellular matrix matter

Fungal hyphae and their surrounding extracellular material appear to help localize the particles. The study identified extracellular proteins and extracellular polymeric substances (EPS), including polysaccharides, as potential contributors to nanoparticle formation and retention. Functional groups in these materials may interact with the metalloids, while the extracellular matrix can provide nucleation sites and act as a particle coating.

For process design, this creates both an opportunity and a handling question. Particles associated with biomass or EPS may be easier to separate from liquid than particles that remain dispersed, but recovery still depends on how the solids are collected and processed. The study observed particles both attached to fungal surfaces and suspended in culture supernatants, with particle shapes and sizes varying by organism and metalloid.

Implications for treatment and resource recovery

Fungal reduction of soluble oxyanions could support two complementary objectives: reducing the mobility of selenium or tellurium in a waste stream and concentrating these elements into solid products that may be recovered. For engineers considering a bioprocess, the findings suggest several factors to evaluate:

  • Feed chemistry: The fungal response differed between selenite, selenate and tellurite, so the metalloid species in the process stream is important.
  • Organism selection: Tolerance and product formation varied across the four fungi; a suitable strain would need to be matched to the target stream and operating conditions.
  • Solids separation: Nanoparticles formed on biomass as well as in liquid, making biomass handling and downstream separation relevant to recovery.
  • Product characterization: Elemental and oxide forms were detected, so analytical verification is necessary to understand the composition of the recovered material.

The experiments used controlled laboratory media and specific incubation conditions. Further development would need to address process performance in relevant waste matrices, operational stability, separation and recovery of the particles, and the composition of the final solids. The reported results provide a basis for investigating these questions, not a complete industrial process specification.

Conclusion

Fungi can reduce soluble selenium and tellurium oxyanions and form nanoscale deposits associated with hyphae, extracellular material and culture liquid. The extent of growth, removal and particle formation depends on both the fungal species and the metalloid compound. For industrial automation and environmental process teams, the practical takeaway is to treat fungal biorecovery as a promising process-development pathway: evaluate feed chemistry, organism tolerance, solids management and product composition together before considering scale-up.

Access Official Technical PDF

About The Author