Access Official Technical PDF

Share Summary:LinkedInEmail

Power interruptions and electrical disturbances can affect process equipment, facility systems and other critical loads. The Galaxy 3500 UPS is a 10–30 kVA, three-phase power protection platform designed for technical facilities and industrial applications. Its combination of double-conversion online topology, parallel capability, service features and an IP51/NEMA 12 enclosure makes it relevant to engineers planning protection for demanding environments.

As with any uninterruptible power supply (UPS), suitability depends on the application: load size and characteristics, required runtime, available electrical infrastructure, environmental conditions and maintenance approach all need to be assessed during system design.

Galaxy 3500 UPS design and power protection

The Galaxy 3500 uses double-conversion online topology. In this arrangement, incoming AC power is converted and then supplied to the output through the UPS power-conversion path. This supports continuous power conditioning for connected equipment during normal operation, with battery operation available when the AC supply is interrupted.

The product range covers rated capacities of 10, 15, 20 and 30 kVA, with corresponding ratings of 8, 12, 16 and 24 kW. The documented input and output voltage is 208 V three-phase, with a normal AC input frequency range of 40–70 Hz. The specification lists input power factor above 0.98 at loads over 50% and total input harmonic distortion below 5% at full load. These characteristics can help inform discussions about the UPS’s interaction with site power systems; engineers should verify installation requirements against the applicable documentation and local electrical codes.

Industrial enclosure, efficiency and installation

Industrial environments can expose electrical equipment to dust, debris and other site conditions. The Galaxy 3500 is specified with an IP51/NEMA 12 protection class, a drip shield and dust protection. Its enclosure uses a heavy-gauge steel front cover and frame, and the design includes floor anchoring and replaceable air filters. These features address practical considerations for equipment rooms and industrial facilities, but they do not remove the need to evaluate the actual installation environment.

The product literature reports efficiency of up to 94%, while the technical table gives full-load AC-to-AC figures that vary by model: 93.0% to 94.1%. Efficiency also varies with load and operating conditions. When estimating energy use or operating costs, use the figures relevant to the selected rating and expected load profile rather than treating a single maximum value as universal.

A compact footprint, wheels and wiring and busbar connection provisions are intended to simplify placement and installation. The UPS is offered in narrow- and wide-tower configurations, and dimensions and weights vary by configuration and battery arrangement. Site planning should account for the complete system, including battery cabinets, bypass equipment and other selected options, as well as access for installation and servicing.

Availability, runtime and emergency lighting

Availability features include dual mains input, an automatic internal bypass and a modular power module. The system can also operate in parallel with up to four units for capacity or redundancy. Parallel operation and bypass arrangements should be engineered for the application, including appropriate coordination of electrical connections and maintenance procedures.

Battery options include high-performance battery modules and external runtime frames. Runtime depends on factors such as UPS rating, battery configuration and connected load, so it should be confirmed for the specific design rather than inferred from the unit’s kVA rating alone. The product information also describes temperature-compensated battery charging and battery replacement without tools.

For emergency-lighting applications, the Galaxy 3500 battery systems are described as UL 924 listed, with UL witness testing against criteria for a minimum of 90 minutes and CSA 22.2 criteria for a minimum of 120 minutes of battery operation at full UPS load. The product information also states that recharge criteria were met under normal and reduced input-voltage conditions. Lighting-system designers should confirm the applicable approval, configuration and runtime requirements for their project.

Serviceability and system management

Maintaining critical power equipment can require work on or around the UPS while the protected load remains important to facility operations. A manual maintenance bypass is available to support maintenance planning. Depending on the configuration, bypass panels can be specified for a single unit or parallel arrangement, with wall-mounted and floor-mounted options. The required bypass design should be reviewed as part of the overall electrical architecture.

Front-access servicing and user-replaceable air filters are intended to make routine service more straightforward. Built-in Web/SNMP management, environmental monitoring, a network management card, an LCD control panel and audible alarms provide ways to view status and receive alerts. In data center environments, the product literature describes management through StruxureWare for Data Centers software. Communications and monitoring choices should align with the facility’s operational and network-management practices.

Engineering checks before specifying a UPS

Before selecting a Galaxy 3500 configuration, technical teams should review the full installation and site-planning documentation. Important considerations include:

  • Load: Confirm both kVA and kW demand, load characteristics and any expected expansion.
  • Runtime: Select a battery arrangement based on the required backup duration and the actual protected load.
  • Electrical design: Verify input, bypass and output wiring, overcurrent protection, grounding and neutral conductor sizing against project requirements and applicable codes.
  • Generator interface: The documentation calls for a properly sized backup generator with suitable frequency and voltage regulation for the UPS application.
  • Physical installation: Check dimensions, installed weight, floor loading, cable-entry arrangements and service clearances for the chosen configuration.
  • Maintenance and redundancy: Determine whether external bypass equipment or parallel units are needed and how they fit the facility’s operating procedures.

These checks are particularly important because equipment ratings and installation details vary with the selected UPS and battery configuration. The supplied planning information also advises consulting engineering services before adopting cable and overcurrent-device ratings.

Conclusion

The Galaxy 3500 UPS combines three-phase online power protection with industrial enclosure features, battery options, parallel capability and tools for service and monitoring. Its listed emergency-lighting approvals may also make it relevant to facilities with life-safety lighting requirements. For engineers and operations leaders, the practical decision is not simply choosing a kVA rating: it is matching the complete UPS, battery and bypass configuration to site loads, runtime objectives, electrical infrastructure and maintenance needs.

Access Official Technical PDF

About The Author