Access Official Technical PDF

Share Summary:LinkedInEmail

Gas liberation in tight reservoirs can change how oil moves through the pore network. As pressure declines below the oil’s saturation pressure, dissolved gas forms a separate phase. If bubbles remain disconnected and immobile, they can obstruct pore throats and reduce effective oil permeability. If they coalesce and migrate, however, the gas may contribute to reservoir drive. Understanding which outcome occurs is important when assessing production behavior in low-permeability formations.

How pressure decline creates a gas phase

At pressures above saturation pressure, gas remains dissolved in the oil. As reservoir pressure falls, some of that gas is released within the porous rock. The emerging bubbles interact with the pore geometry, oil, and surrounding surfaces. Those conditions help determine whether bubbles stay isolated or join to form a connected, mobile gas phase.

The difference matters because gas does not affect oil flow in a uniform way. A bubble that occupies a narrow pore throat can impede oil movement even if the gas itself cannot travel through the formation. By contrast, bubbles that coalesce and migrate upward may support gas-oil gravity drainage. The latter behavior depends on factors including reservoir permeability and dip, layering or stratigraphy, and the relative permeabilities of the fluid phases.

Why trapped bubbles reduce oil permeability

In a tight or otherwise low-permeability medium, pore geometry and capillary forces can make it difficult for newly formed gas bubbles to move. Wettability—the tendency of a fluid to contact the rock surface—also contributes to how fluids occupy the pore space. Where the conditions favor isolated bubbles, gas can block individual pore throats rather than create a continuous pathway.

This obstruction reduces the space available for oil to flow and can lower the oil’s effective permeability. The impact is therefore not simply a matter of how much gas is released. Its distribution and mobility within the pore network are also important. A useful assessment must connect the amount of liberated gas to the resulting change in oil flow.

Measuring gas liberation in tight reservoirs

One experimental approach is to lower pressure across the saturation point while monitoring a low-permeability rock sample. X-ray computed tomography can help detect gas forming inside the sample, while measurements of effective oil permeability track changes in flow behavior. Monitoring for the onset of gas production can also indicate whether a mobile gas phase has developed.

In experiments on two Stevns Klint outcrop samples, with approximate porosity of 42% and absolute permeability of 3 mD, the liberated gas appeared as disconnected bubbles. These bubbles caused a significant decrease in effective oil permeability. The observation illustrates why pressure-driven gas release needs to be considered alongside the rock’s pore structure and the mobility of each fluid phase.

Modeling the effect on relative permeability

Experiments can show how permeability changes under specific conditions, while a model can help relate those observations to the amount of gas present. In the described work, a thermodynamic model was used to calculate gas liberation, accounting for oil-gas equilibrium under capillary forces. A separate permeability model, based on effective-medium theory and combinatorial methods, was used to estimate how gas bubbles affect oil relative permeability.

Relative permeability describes how readily one fluid flows through a porous medium when other fluids are present, compared with its ability to flow alone. It is a key concept for interpreting multiphase flow: as gas occupies pore space, the pathways available to oil may become more restricted. The model was verified against gas-condensate data from published literature and then applied to predict the experimental results. Its predictions successfully represented the effect of the disconnected bubbles on oil relative permeability.

If gas begins to flow out of the sample, a more advanced dynamic model is needed. In that situation, estimating gas-oil relative permeabilities becomes important because both phases are moving and influencing one another’s flow.

Practical implications for reservoir assessment

For engineers evaluating production from low-permeability reservoirs, the findings highlight the need to distinguish between gas that is trapped and gas that is mobile. Pressure decline alone does not describe the operational consequence: the behavior of the gas phase within the pore network determines whether it restricts oil flow or participates in reservoir drive.

  • Track pressure relative to saturation pressure: this identifies when gas may begin to emerge from the oil.
  • Assess bubble mobility: disconnected gas can obstruct pore throats, while connected gas may migrate through the formation.
  • Relate gas presence to oil flow: permeability measurements and relative-permeability models help quantify the effect.
  • Use models suited to the flow regime: trapped bubbles and produced gas require different levels of modeling detail.

Conclusion

Gas liberation in tight reservoirs can significantly reduce oil permeability when pressure decline produces disconnected, immobile bubbles that block pore space. Experimental imaging and flow measurements, supported by thermodynamic and permeability modeling, offer a way to connect gas formation with changes in oil mobility. For reservoir assessment, the practical priority is to determine whether liberated gas remains trapped or becomes a flowing phase, since the two outcomes have different implications for production behavior.

Access Official Technical PDF

About The Author