Access Official Technical PDF

Share Summary:LinkedInEmail

Grid-interactive efficient buildings (GEBs) combine energy efficiency, smart controls and distributed energy resources to manage building loads in ways that account for occupant needs and electric-grid conditions. Lighting and electronics are important parts of this picture: their energy use can often be reduced, and connected systems may also respond to demand-response signals. Turning that potential into useful flexibility requires careful control, suitable communications and attention to how people use the space and equipment.

Why lighting and electronics matter to building demand flexibility

Lighting and electronics represent meaningful electricity loads in both residential and commercial buildings. In 2018, lighting accounted for approximately 10% of electricity use from major loads in homes and 16% in commercial buildings. Consumer electronics and information technology equipment accounted for about 10% in homes and 23% in commercial buildings. These figures indicate why managing these end uses may matter to building energy planning, particularly in commercial facilities.

The timing of use also matters. Commercial lighting and electronics generally peak during typical office hours, while residential use tends to rise later in the day. A building’s load profile—the timing of its electricity consumption—helps determine when an adjustment could support grid needs. The potential value of a response varies with factors such as location, hour and season.

Efficiency remains a central opportunity: using less electricity to provide the same or improved function can lower ongoing demand. Beyond efficiency, connected technologies may support load shedding or fast modulation. Load shifting is generally difficult for lighting and electronics on their own because they must operate when needed; shifting use to another time typically requires an additional resource such as electricity storage.

Connected lighting: flexibility without compromising the space

Connected solid-state lighting systems use sensors, controls and algorithms to adjust lighting in response to conditions or external signals. For grid response, a system might reduce light output during a requested period, but it cannot treat occupied spaces as freely interruptible loads. Lighting levels must remain appropriate for occupant safety, comfort and productive work. The feasible adjustment therefore depends on the space, its activities and the availability of daylight.

That constraint helps explain why lighting has historically been less prominent in demand-response programs than some other building loads. Lighting is generally expected to remain available while a space is occupied, and dimming is useful only within limits that do not undermine the task or the people performing it. The report also notes that the power of an individual commercial LED lamp is small, making whole-building aggregation important when considering lighting as a grid resource.

Two approaches with grid-service potential

  • Advanced sensors and controls: Connected controls can modulate lighting levels, and potentially other power-consuming lighting features, in response to grid or pricing signals. Sensors and control algorithms can help tailor adjustments to building conditions, but their value depends on reliable sensing and appropriate response strategies.
  • Hybrid daylight solid-state lighting: These systems combine electric lighting with technologies that collect and redistribute daylight. They can connect daylight availability with electric-light control, though system design must address transmission losses and transitions between daylight and electric light.

For both approaches, the control objective is not simply to reduce watts. Systems need to deliver a grid response while maintaining suitable lighting conditions. Research needs identified in the report include measuring flexibility across different building types and activities, improving sensor integration and signal processing, and developing control algorithms that limit occupant impact.

Electronics and IT: control must account for function

Building electronics cover several distinct load types. Continuous-operation equipment—including network equipment, servers, desktop computers and some audiovisual systems—requires a steady power supply to perform its intended role. Battery-powered devices such as laptops, phones and tablets rely on rechargeable batteries and chargers. Electronic displays, including monitors, televisions and video walls, require power while operating.

These categories do not offer identical opportunities for demand response. A response that reduces or changes equipment power must account for what the device is doing and whether its service can be interrupted. The report identifies communication and consumer impact as key challenges: electronics need control intelligence, while users need ways to express preferences about energy use and product functionality. Integrating control logic into existing algorithms and understanding the relationship between user preferences and functional limits are proposed areas for further work.

Technology integration is a practical prerequisite

Connected devices can only contribute to coordinated building management if they can communicate with the relevant control systems and respond to appropriate signals. The report identifies interoperability, cybersecurity and cost as cross-cutting challenges for connected technologies. Standardized ways for devices and software to describe and exchange information can support interoperability. Secure architectures and cybersecurity practices are also important considerations. On the manufacturing side, opportunities include lower-capital-cost processes and materials compatible with scalable production.

These issues sit alongside the building-level control challenge. A GEB may coordinate lighting and electronics with other building loads and distributed energy resources, but the lighting and electronics technologies discussed here are components of that broader system. Their grid value depends on the ability to manage loads in context, rather than treating each device as an isolated switch.

Conclusion: pair flexibility with occupant and equipment needs

Connected lighting and electronics offer building operators options beyond conventional energy efficiency, including targeted load reduction and, where controls permit, rapid modulation. However, lighting cannot be reduced without regard to safety and comfort, and electronics controls must preserve essential functions and user expectations. For engineers and facility leaders, the practical priorities are to understand load timing, identify which uses can be adjusted, and evaluate sensing, communications and control strategies together. With those conditions addressed, these end uses can contribute to more responsive building energy management while continuing to serve the people and operations that depend on them.

Access Official Technical PDF

About The Author