Access Official Technical PDF

Share Summary:LinkedInEmail

High-power semiconductor technologies are becoming central to systems that convert and control electrical energy, from industrial motor drives to electric vehicle (EV) traction inverters and renewable energy equipment. As applications demand more power in constrained spaces, engineers must consider more than the switching device alone. Device characteristics, thermal paths, package design, protection and system-level reliability all influence the final solution.

These design priorities differ from those in many low- and medium-power products. In high-power applications, such as systems above roughly 5 kW, development cycles can be longer, and even a 1–2% efficiency improvement may justify substantial engineering effort. Reliability and cost remain important, but performance must be evaluated in the context of the complete power-conversion system.

Why high-power semiconductor content is increasing

More data processing and movement require more electrical power, while equipment is often expected to deliver greater capability without taking up more space. That combination increases power density and raises the demands on power conversion. Similar pressures are evident in automotive electrification, renewable energy, efficient motor systems and fast charging.

Electrification also changes what is inside a product. A conventional brushed motor may use a single power switch, while a three-phase brushless DC motor requires multiple switches and a controller. Likewise, replacing an alternator-based vehicle function with an onboard charger introduces power-conversion stages and additional semiconductor devices. The specific circuit varies by application, but the broader trend is toward greater semiconductor content per system.

Standards and regulations can contribute to this shift by encouraging more efficient motors, heating systems and energy sources. For industrial automation, that means power electronics are increasingly relevant to equipment such as pumps, fans, compressors, servo drives and other motor-driven loads.

Choosing devices for the application

Power semiconductor technologies occupy different operating ranges. Silicon MOSFETs, IGBTs, thyristors and wide-bandgap devices such as silicon carbide (SiC) and gallium nitride (GaN) are not interchangeable choices. The suitable device depends on factors including switching frequency, voltage, power level, losses and the operating requirements of the application.

IGBTs remain an important option for high-power conversion. Their development has included punch-through and non-punch-through structures, followed by field-stop and trench designs. These technology changes aim to improve the balance among conduction loss, switching loss and rugged operation. Field-stop IGBT features described for high-power applications include low conduction and switching losses, a positive temperature coefficient that can support parallel operation, a maximum junction temperature of 175°C, tight parameter distribution and a large safe operating area.

Device selection still involves trade-offs. Lower on-state voltage can reduce conduction losses, while turn-off losses affect switching performance. Improving efficiency must be balanced with ruggedness and reliable operation, including the ability to withstand application-specific stresses such as short-circuit and latch-up conditions. The appropriate optimization is therefore specific to the system, rather than a search for one device characteristic in isolation.

Power module packaging and thermal design

Packaging can help address electrical, thermal and mechanical requirements together. Integrating devices into a power module can reduce footprint and stray inductance, support thermal management and simplify assembly. Modules may also incorporate sensing and protection features, such as current sensing, over-current detection with soft shutdown, undervoltage lockout and temperature sensing.

For traction inverters, module development has focused on reducing cost per kilowatt, weight and volume while maintaining performance. Cooling architecture is a key part of this effort. Power module platforms can use single-sided cooling, direct cooling or dual-sided cooling, depending on power level and design. The package, substrate and cooling paths must be considered alongside the semiconductor devices because they shape how heat is removed from the assembly.

Other design choices affect both implementation and performance. These include substrate options, wire bonds or clip interconnections, and joining methods such as soldering, welding, press-fit connections or screws. Current and temperature sensing, passive-component selection and snubber circuits may also be part of the system design. Each decision has implications for electrical behavior, thermal performance, assembly cost and reliability.

Application-specific approaches beyond automotive

Automotive power modules illustrate the broader direction of high-power design, but similar principles apply in industrial and energy systems. Solar installations, for example, use power conversion to connect photovoltaic panels to electrical systems. Distributed solar architectures in the 80–150 kW range have gained acceptance, while 1500 V panels are associated with IGBT nodes around 950–1000 V. Multilevel topologies and customized circuit configurations can be used to pursue higher efficiency.

Transfer-molded power integrated modules offer another packaging approach for medium-power applications. Their features can include a transfer-molded structure, a direct-bonded-copper substrate and a leadframe with selectively removable pins. Such design choices can support robustness, thermal performance and configuration flexibility. A module without integrated control ICs may also be a cost-effective option where that level of integration is not required.

Industrial automation brings its own priorities. Servo motors and other controlled loads require power conversion that fits the application’s electrical and thermal requirements. A modular, application-specific design can help system developers match semiconductor technology and packaging to the intended operating conditions rather than relying on a generic solution.

Plan for reliability at system level

Component testing alone does not define automotive-grade or industrial reliability. The design process must consider requirements from development through the operating life of the system. As integration increases through multichip modules, power integrated modules and intelligent power modules, engineers must assess interactions among the devices, package, sensing, protection and surrounding system.

For system integrators and plant decision-makers, this makes early coordination valuable. The semiconductor choice should be reviewed alongside the converter topology, cooling method, protection strategy, physical constraints and service expectations. Reference designs and application-specific modules can help organize these decisions, but the selected configuration still needs to match the system’s requirements.

Conclusion

Rising power density and electrification are increasing the importance of high-power semiconductor technologies across automotive, renewable energy and industrial applications. Successful designs balance device losses with ruggedness, and treat packaging, thermal management and protection as integral parts of power conversion. For automation engineers and technical decision-makers, the practical priority is to evaluate the semiconductor and module as parts of a complete system—one designed around its actual power, efficiency, space and reliability needs.

Access Official Technical PDF

About The Author