Access Official Technical PDF

Share Summary:LinkedInEmail

Hybrid Josephson junctions combine superconducting electrodes with a semiconductor channel, bringing together materials that may support new quantum-device architectures. In a demonstrated on-chip circuit, niobium (Nb) electrodes contact an In₀.₇₅Ga₀.₂₅As quantum well to form eight planar junctions. Measurements on one junction showed induced superconductivity at temperatures of 300–900 mK and a measurable response to magnetic field. The work offers a useful case study in integrating semiconductor transport structures with superconducting circuit elements.

Why hybrid Josephson junctions matter

A superconductor-semiconductor-superconductor, or S-Sm-S, junction uses a semiconductor as the region between two superconducting contacts. When superconductivity is induced in that channel through its contact with the superconductors, the junction can carry superconducting correlations across a material whose properties can be engineered separately from those of the electrodes.

For quantum-device development, the challenge is not simply making one functioning junction. The interfaces must support effective coupling, and multiple junctions must be incorporated into a common chip architecture. The reported device addresses the integration question by patterning eight symmetric, planar Nb-InGaAs-Nb junctions on one semiconductor chip. Although the circuit contains eight junctions, the reported experimental measurements focus on one device; performance statistics across the full set were not presented.

Building the Nb-InGaAs circuit

Engineering the semiconductor channel

The semiconductor heterostructure was grown by molecular beam epitaxy on a GaAs substrate. Its active channel is a 30 nm-thick In₀.₇₅Ga₀.₂₅As quantum well, located approximately 120 nm below the wafer surface. The well forms a two-dimensional electron gas (2DEG), which provides the semiconductor transport channel between the Nb contacts.

The structure also includes In₀.₇₅Al₀.₂₅As layers and modulation doping. Hall-effect and Shubnikov–de Haas measurements at 1.5 K were used to characterize the electron system. In the dark, the measured electron density was 2.24 × 10¹¹ cm⁻² and mobility was 2.5 × 10⁵ cm²/Vs; after illumination, the reported values were 2.28 × 10¹¹ cm⁻² and 2.58 × 10⁵ cm²/Vs.

Patterning multiple junctions on one chip

Fabrication combined photolithography, electron-beam lithography, wet etching and metal deposition. Wet etching defined the mesa, or active region, while a deeper trench was formed where the Nb contacts meet the semiconductor channel. Approximately 130 nm of Nb was deposited to create the superconducting electrodes. Each junction had a width of 3 μm and a shortest electrode-to-electrode separation of 550 nm. Ti/Au layers were added for electrical measurement connections.

The reported electron mean free path was approximately 2 μm, longer than the junction’s 550 nm shortest path. This comparison supports the description of the measured junction as ballistic: the channel length is shorter than the characteristic distance electrons travel between elastic scattering events. The device geometry and transport properties therefore provide important context for interpreting the measured electrical response.

What the measurements show

Researchers measured differential resistance, dV/dI, against source-drain voltage using a two-terminal lock-in setup in a helium-3 cryostat. At zero applied magnetic field, a reduced-resistance feature associated with an induced superconducting gap was observed from 300 mK to about 900 mK. It was not observed at the higher measured temperatures shown, which extended to 1.5 K.

At a base temperature of 300 mK, the bias-voltage features were used to estimate an induced gap of 0.65 meV. The resistance response is consistent with superconducting correlations entering the InGaAs channel from the Nb contacts. Andreev reflection—where electrons and holes are correlated at a superconductor-semiconductor interface—is one process relevant to transport in these junctions.

Applying a magnetic field perpendicular to the junction plane changed the voltage-dependent resistance. The gap-related peaks moved toward zero bias as the field increased and disappeared near 50 mT. A broader V-shaped resistance dip remained visible at fields up to 1 T; the reported interpretation associates this feature with coherent multiple Andreev and normal reflections at the interfaces. These are distinct observations: the disappearance of the gap-related peaks does not mean that every feature in the resistance response vanished at the same field.

Implications for device development

The result demonstrates a fabrication route for placing several planar hybrid junctions on one InGaAs chip and observing induced superconductivity in the semiconductor channel at sub-kelvin temperatures accessible to the reported helium-3 cryostat measurements. Compared with earlier, longer junctions made using photolithography, the shorter junction design and revised processing approach were associated with observing the induced gap at higher temperatures. The results do not, however, establish yield or uniformity across all eight junctions, nor do they demonstrate a complete quantum processor.

For engineers and technical decision-makers following quantum hardware, the practical lesson is that material growth, interface formation, junction dimensions and measurement conditions must be considered together. Scaling a circuit requires more than repeating a device pattern: the electrical behavior of individual junctions and consistency across the chip also need to be assessed.

Conclusion

The Nb-InGaAs circuit shows how semiconductor quantum wells and superconducting contacts can be integrated into a multi-junction chip. Measurements on one junction confirmed an induced superconducting response over a defined temperature range and revealed how that response changed under magnetic field. These findings make the platform a candidate for further scalable quantum-device research, while underscoring the need for additional characterization of junction-to-junction performance and circuit-level operation.

Access Official Technical PDF

About The Author