A hybrid solar-waste power plant can pair variable solar heat with a second heat source to make renewable electricity generation more controllable. In the design examined here, parabolic trough collectors supply the primary heat for a Rankine-cycle steam plant, while a municipal solid waste (MSW) incineration unit adds heat when solar input is insufficient. The concept offers energy-system planners and plant designers an alternative to relying on solar thermal storage to manage changes in available sunlight.
Why combine solar thermal power and waste incineration?
Concentrating solar power (CSP) uses mirrors to focus sunlight and produce heat. That heat can drive a conventional steam power cycle, but solar availability varies with weather and time of day. Fluctuating heat input can, in turn, make a plant’s power output less predictable.
Thermal energy storage is one way to address that variability. Another is to integrate CSP with a secondary heat source. Waste incineration is used for heat and power production in some European energy systems, including Denmark, the location considered in the study. In a hybrid arrangement, the incinerator can supply heat when solar contribution falls, while the solar field reduces the amount of heat that must come from incineration when sunlight is available.
This integration connects two energy-system functions: converting solar heat into electricity and recovering energy from waste. It also creates operating flexibility because the heat contribution can shift between the sources as solar conditions change.
How the hybrid solar-waste power plant operates
The proposed configuration is based on a Rankine cycle. Steam expands through high-, intermediate- and low-pressure turbine stages, which drive an electricity generator. The cycle also includes reheat, regeneration and feedwater preheating.
Heat from the parabolic trough collector (PTC) array is transferred to the plant’s working fluid through a heat exchanger. The fluid’s temperature after this stage depends on the solar heat available. A second heat exchanger, supplied by the waste incineration unit, provides additional heat to bring the working fluid to the required temperature before turbine expansion. In the modeled arrangement, the waste-heat system also supplies heat to the regeneration line.
The incinerator’s contribution is therefore not fixed: it changes with the solar heat available and the plant’s heat requirement. The analysis models MSW as the fuel and accounts for its lower heating value and the assumed incineration efficiency. The proposed plant has a nominal electrical capacity of 10 MW.
What the year-long simulation examined
The researchers modeled the system for a case study in Aarhus, Denmark, over a full year. The analysis considered solar irradiation, useful heat from dual-tracking PTCs, the heat supplied by incineration, waste requirements and overall energy efficiency. The solar-collector model was also compared with published experimental results as a validation step.
Solar conditions varied substantially across the sample periods. The modeled collectors could produce considerably more useful heat on the representative July days than on the January days. In the study’s proposed operating strategy, the plant’s electricity sales profile was based on forecast solar availability, with generation planned during daylight hours. The waste unit supplemented heat supply when solar input was lower, including during cloudy periods.
These details matter when interpreting the dispatchability claim. The hybrid arrangement can moderate the effect of changing solar heat by supplementing it with incineration, but the simulated sales strategy remained tied to expected solar availability. The results do not establish that the plant would deliver constant output around the clock in all seasons.
Understanding the efficiency results
The study reports a 36% efficiency for the Rankine cycle at nominal operating load. That figure describes the cycle under the stated nominal conditions. Separately, the modeled hybrid plant’s overall annual energy efficiency is reported as 24%. These values refer to different measures and should not be treated as interchangeable.
The analysis also indicates that the solar and waste heat contributions vary over time. When solar heat increases, the incineration unit’s required heating duty decreases; when solar heat declines, its contribution increases. The amount of waste needed consequently depends on the operating profile and on how much heat the solar field supplies. The study does not provide a universal waste requirement for other sites or plant configurations.
Practical considerations for project teams
For engineers and project developers, the concept highlights several factors to assess before applying this architecture:
- Resource profiles: Solar irradiation and waste availability determine how the two heat sources can complement each other over the year.
- Thermal integration: Heat exchangers and cycle conditions must be considered together so that solar and incineration heat can serve the working fluid as intended.
- Operating strategy: Forecasts, the planned electricity sales profile and the incinerator’s required contribution affect plant operation and fuel demand.
- Project feasibility: The study identifies potential benefits such as improved dispatchability, shared equipment and reduced need for storage, but its case-study results are not a substitute for site-specific technical and economic assessment.
The modeled design uses a secondary heat source rather than an energy-storage unit to balance solar input. That distinction may be relevant where waste incineration is already part of the local energy system, but its suitability depends on local conditions and project requirements.
Conclusion
A hybrid solar-waste power plant combines parabolic trough solar heat and waste incineration in a Rankine-cycle system. In the Denmark case study, the incinerator supplements solar heat as irradiation changes, supporting a more controllable operating profile without modeled thermal storage. For industrial energy planners and system designers, the central lesson is that hybridization can link renewable generation with another heat source—but performance, waste demand and dispatch strategy must be evaluated against the site’s resources and operating objectives.