Hybrid testing gives engineering teams a way to validate connected and autonomous vehicle systems before relying on full vehicle trials. By combining software simulation with tests of physical hardware, teams can investigate system behaviour across more scenarios while managing the cost, safety risks and practical limits of testing on public roads.
The approach is relevant wherever complex electronic systems must work reliably together. For vehicle developers, it can help build evidence about individual modules, subsystem integration and interactions with traffic and communications infrastructure. For industrial automation professionals, the underlying principle is familiar: match the test method to the maturity and risk of the system, and understand what each test can—and cannot—prove.
Why connected vehicle validation is challenging
Connected and autonomous vehicles (CAVs) combine sensors, control systems, communications links and software that must respond to changing conditions. Their safety depends not only on the behaviour of individual components, but also on how those components interact with the vehicle, other road users and surrounding infrastructure. Cybersecurity adds another dimension: vehicle systems and connection points need to be assessed for security risks.
Testing every condition on real roads is difficult. Some scenarios may be unsafe, costly or impractical to reproduce, while regional differences in road rules, driving regulations and infrastructure add further complexity. Physical testing also depends on hardware being available, including safety-critical embedded systems that can be expensive to produce.
Controlled test facilities can help. A dedicated test environment can reproduce elements of a city while allowing teams to manage traffic, infrastructure and other conditions. Simulation extends testing further by making it possible to explore situations that are difficult to stage physically, including hazardous scenarios and different mixes of connected and non-connected vehicles.
Hybrid testing combines virtual and physical systems
Hybrid testing brings together software-in-the-loop (SiL) and hardware-in-the-loop (HiL) methods. These approaches serve different purposes, so selecting between them—or combining them—depends on which parts of the system are ready and what the test needs to establish.
Software-in-the-loop testing
SiL testing uses software models rather than the physical hardware under development. This can allow engineers to begin testing before hardware is built and to run simulations faster than real time. It is generally less expensive than testing with physical components, making it useful for exploring system behaviour and refining software early in development.
However, SiL does not verify the actual hardware or its interfaces. Its value depends on the quality and suitability of the models and on whether their limitations are understood. A simulated result should not be treated as direct proof of how a physical system will behave under every condition.
Hardware-in-the-loop testing
HiL testing connects a physical subsystem to simulated inputs. Instead of testing an entire vehicle, engineers can evaluate a specific module while the rest of the environment is represented in the test setup. For example, an autonomous emergency braking control module can receive simulated inputs representing radar and camera signals, along with steering and braking commands.
Because the test includes physical hardware, HiL can examine how the module communicates through its interfaces and whether its connections and protocols function appropriately. Unlike SiL, it does not normally enable testing faster than real time. It is also shaped by the interfaces and constraints of the hardware used in the setup.
Build a test sequence around system maturity
SiL and HiL are most useful as parts of a broader verification and validation programme. Teams can use SiL while software and hardware are still being developed, then introduce physical subsystems into HiL setups as they become available. Controlled facilities and real-world testing can follow when the system is ready for those stages.
This staged approach allows engineers to investigate functionality, safety and security concerns before the complete system is exposed to the complexity of a road trial. It does not remove the need for physical testing; instead, it helps focus later tests on questions that cannot be answered adequately in simulation.
- Use SiL to assess software behaviour before the target hardware is ready, while documenting model assumptions and limitations.
- Use HiL to test a physical module’s responses, interfaces and communications with simulated conditions.
- Use controlled test facilities to examine system behaviour in a managed, more realistic environment.
- Use real-world trials as part of the overall evidence base, rather than as the sole means of exploring every scenario.
Model quality and assumptions matter
Simulation results are only as useful as the models and data behind them. A realistic test environment may include models of road networks and infrastructure, traffic conditions, vehicles, communications, human drivers and specific traffic scenarios. Each model has its own data requirements, and the realism of the outputs depends heavily on the availability and quality of that data.
Teams must also make assumptions when a simulated model stands in for a physical test article. These assumptions can affect outcomes; for example, the chosen representation of seat positioning could influence an assessment of passenger safety in a crash. Since it is difficult to predict every variable and outcome, engineers need a clear understanding of the test objective, expected results and setup limitations.
Hybrid testing therefore requires more than access to simulation software and hardware rigs. It requires specialist expertise to decide which conditions to model, how to interpret results and when additional physical testing is needed. Poorly understood assumptions can undermine the usefulness of generated data.
Conclusion: Treat testing as a connected programme
For CAV developers, hybrid testing offers a practical way to combine early software evaluation, physical subsystem testing and progressively more realistic trials. Its strength lies in using each method for the questions it can answer—not in treating simulation as a replacement for hardware or road testing.
Engineering teams should define test objectives, make model assumptions explicit and consider how well simulations represent the conditions of interest. A coordinated programme spanning module, integration and system testing, SiL, HiL, controlled facilities and real-world roads can build a more complete evidence base for safety and performance decisions.