Industrial automation standards shape how control systems are designed, integrated, tested and maintained. A December 2017 notice from Norway’s electrotechnical committee, NEK, captured several developments relevant to automation professionals: proposed European standards, newly issued IEC publications and adopted European standards. The notice is a historical snapshot, not a statement of current requirements, but it shows how cybersecurity, functional safety, industrial networking and instrumentation were being addressed across standards work at that time.
For engineers and plant leaders reviewing legacy designs or standards histories, the distinction between a draft under consultation and a published standard is essential. The notice included both. Proposed documents had voting deadlines in late 2017 or early 2018; they should not be read as final requirements. Other entries were listed as issued publications or established Norwegian European standards.
Cybersecurity enters the standards pipeline
Two proposed CENELEC documents stood out for industrial control system security. prEN 62443-3-2 covered security risk assessment and system design, while FprEN 62443-4-1 addressed security requirements for product development. Both were assigned to CLC/TC65X, the committee responsible for industrial-process measurement and control topics in the bulletin.
Their separate scopes point to two related but distinct concerns. A system-level risk assessment considers the design of the automation environment, while product development requirements concern how security is addressed in the development of industrial products. For asset owners, integrators and suppliers, this distinction helps frame discussions about where security activities belong in a project or product lifecycle. In the 2017 notice, both documents were proposals, with consultation deadlines—not evidence that the proposed texts had already become final standards.
Functional safety and dependable control networks
Functional safety was another significant theme. The notice listed NEK EN 61511-1:2017/A1:2017, an amendment concerning the framework, definitions, and system, hardware and software requirements for safety instrumented systems in the process industry. It also listed updates and newer editions in the EN 61784-3 family, which covers functional safety fieldbus profiles.
These documents are relevant to different parts of a safety-related automation architecture. IEC 61511 concerns safety instrumented systems in process applications; the EN 61784-3 entries address communication profiles used by functional safety fieldbuses. A project team assessing an older system would need to identify the specific edition and amendment applicable to its design and obligations rather than assume that a later listing automatically changes an existing installation’s requirements.
Network availability also featured in the adopted standards section. NEK EN 62439-1:2010/A2:2017 concerned general concepts and calculation methods for high-availability automation networks, while NEK EN 62439-2:2017 covered the Media Redundancy Protocol (MRP) and replaced the 2010 edition. These are relevant when reviewing how network redundancy is specified and documented. The bulletin identifies the standards’ subjects; it does not prescribe a particular network design.
Engineering guidance for controllers and transmitters
Among the IEC publications issued as NEK publications was NEK IEC/TR 61131-8:2017. This technical report provides guidelines for the application and implementation of programmable-controller programming languages and replaced the 2003 edition. As a report, it offers guidance rather than being presented in the notice as a new mandatory controller requirement. Its revision is nevertheless relevant to teams maintaining programming practices, engineering procedures or documentation based on the earlier edition.
The same issue listed the first editions of IEC 62828-1 and IEC 62828-2. These publications address reference conditions and testing procedures for industrial and process measurement transmitters: Part 1 gives general procedures, while Part 2 specifies procedures for pressure transmitters. For instrument engineers and calibration teams, the subjects provide a reference point when reviewing transmitter test documentation and the conditions under which measurements are assessed.
Cabling and field-device integration
A proposed revision of EN 50173 covered generic cabling systems across several environments. The series included FprEN 50173-3 for industrial spaces, alongside separate parts for offices, homes, data centres and distributed building services. Its industrial-space scope makes it particularly relevant to engineers planning or documenting communications infrastructure. As the entry was a proposal, it should be treated as a standards-development item in that 2017 notice.
For device integration, the adopted list included amendments to EN 62453, the Field Device Tool (FDT) interface specification. The entries addressed communication-profile integration, including IEC 61784 profiles. Alongside the network and cabling documents, these updates illustrate that interoperability work spans physical infrastructure, communication profiles and engineering interfaces—not just the controller or field device in isolation.
How to use a historical standards bulletin
For standards tracking, the practical value of the notice lies in its structure and topic coverage. Engineers can use it to identify documents that may warrant edition checks in legacy project records, while managers can use it to prompt a review of internal standards registers. A disciplined review should:
- Separate status categories. Distinguish proposals and consultation drafts from issued publications and adopted standards.
- Check editions and amendments. Record the exact part, year and amendment cited in project specifications and compliance documentation.
- Follow the relevant scope. Match a document to the system or activity it addresses, such as safety instrumented systems, fieldbus profiles, transmitter testing or industrial cabling.
- Verify current applicability. Consult the relevant standards body or applicable regulatory and contractual requirements before making present-day design or compliance decisions.
The 2017 NEK bulletin shows standards activity across cybersecurity, functional safety, network availability, controller programming, instrumentation and cabling. For automation professionals, the enduring lesson is to manage standards as controlled engineering references: track their status, editions and scope, and verify applicability before relying on them in a current project.