Access Official Technical PDF

Share Summary:LinkedInEmail

Conductivity sensors provide a measurement input for monitoring or controlling the ionic conductivity of liquids and solutions. In industrial service, selecting a sensor requires more than matching the expected reading: engineers also need to consider cell constant, electrode configuration, installation method, process conditions and analyzer compatibility. These factors matter in applications ranging from general water quality monitoring to ultrapure water measurement in semiconductor and pharmaceutical environments.

Yokogawa’s SC4AJ, SC8SG and SC210G sensor and detector families offer different measurement ranges and mounting arrangements for use with compatible liquid analyzers. Understanding how those options differ can help engineers and system integrators define a suitable measurement point and avoid installation or material-selection mismatches.

Start with the measurement range and cell constant

A sensor’s cell constant is central to matching the instrument to the conductivity expected in the process. The available models cover ranges from very low conductivity through high-conductivity solutions, but each sensor configuration has a defined range. Check the specific model’s stated limits rather than assuming that every sensor in a family covers the same span.

  • SC4AJ: Two-electrode sensor options have cell constants of 0.02 cm⁻¹ and 0.1 cm⁻¹. The 0.02 cm⁻¹ option covers ranges from 0–0.5 µS/cm to 0–200 µS/cm; the 0.1 cm⁻¹ option covers 0–5 µS/cm to 1 mS/cm.
  • SC8SG: The low-, medium- and high-range versions use cell constants of 0.01, 0.1 and 10 cm⁻¹, respectively. Their stated ranges extend from sub-microsiemens-per-centimeter measurements to 0–1000 mS/cm, depending on configuration.
  • SC210G: The low-range version uses a 0.05 cm⁻¹ cell constant and covers 0–0.5 µS/cm to 0–200 µS/cm. The medium-range version uses 5 cm⁻¹ and covers 0–200 µS/cm to 0–20 mS/cm.

These figures describe different model configurations, not a single interchangeable operating range. For example, a process expected to vary across a broad range may require a different selection from one designed to measure very low conductivity. The analyzer and sensor configuration should be checked together during specification.

Consider electrode configuration and process conditions

The SC4AJ and SC210G use two-electrode measurement systems. SC8SG models are available with two electrodes, while the 10 cm⁻¹ high-range version can also be specified with four electrodes. The four-electrode arrangement is identified for applications requiring countermeasures against polarization associated with contamination; it is not offered for the SC8SG low- and medium-range configurations.

Process conditions can affect measurement reliability and sensor life. The specifications caution that air bubbles in the sample can prevent correct readings. For flow-through installations, no general flow-rate limit applies to measurement, but the recommended flow rate is below 20 L/min. Where a sample contains slurry, high flow speeds can cause substantial wear to electrodes or the holder’s inner walls. At high conductivity, a polluted solution may also affect measured values.

Temperature and pressure limits depend on the sensor model and, in some cases, its holder material. For instance, SC4AJ electrode temperature is specified from 0 to 110°C, while holder limits vary by material. SC8SG and SC210G limits also differ by configuration, including for polypropylene holders. Confirm the applicable model data against the actual operating envelope rather than relying on a family-level assumption.

Match the installation style to the measurement point

Mounting choices determine how a sensor interfaces with the process piping and how it can be accessed for maintenance. SC4AJ options include adapter mounting, a welding socket, and welding clamp arrangements. SC8SG and SC210G are available in screw-in, flange and flow-through constructions; SC210G also has a screw-in version with a gate valve.

For flow-through models, holder material and support are important specification details. The SC8SG and SC210G polypropylene-holder configurations require the specified stainless-steel mounting hardware; the documentation warns that an unsupported polypropylene holder can crack or split. Flow-through sensor selection should also account for the connection type and the space needed for installation and maintenance.

Verify wetted materials and analyzer compatibility

Wetted-part materials differ across models and configurations. Depending on the selected version, materials can include stainless steel, titanium, polypropylene, PVDF, graphite, platinum, glass, epoxy resin and fluoro-rubber seals. Choosing materials therefore requires consideration of the actual process liquid, its concentration and temperature. The published corrosion-resistance information applies to individual chemicals; mixtures may behave differently. For strongly corrosive fluids or uncertain compatibility, confirm the appropriate construction with the manufacturer.

Also check the electrical connection before ordering. Cable options include pin terminals and M4 or M3 ring terminals, with applicability depending on the analyzer and sensor. The specifications list compatible connections for analyzers including the FLXA202, FLXA21, FLXA402 and FLXA402T, with certain Variopin connections used with an SA11. Compatibility is terminal-specific, so cable length alone is not enough to finalize the selection.

A practical specification checklist

Before choosing conductivity sensors for a new or replacement installation, document:

  • Expected conductivity range and required cell constant.
  • Whether a two- or four-electrode configuration is appropriate.
  • Normal and maximum process temperature and pressure.
  • Flow rate, potential air bubbles, slurry or fouling, and cleaning conditions.
  • Mounting method, process connection and holder material.
  • Wetted-material compatibility with the process solution.
  • Analyzer model, terminal type and required cable length.

Careful specification connects the measurement range to the real process environment, rather than treating the sensor as an isolated component. For plant teams, that means verifying operating limits, mounting and materials alongside analyzer wiring before procurement and installation. This approach helps ensure the selected conductivity sensor and analyzer are suited to the intended measurement point.

Access Official Technical PDF

About The Author