Access Official Technical PDF

Share Summary:LinkedInEmail

Industrial sensors and drivers are essential links between automation systems and the physical equipment they monitor or control. Sensors capture information such as position, temperature, pressure or current. Drivers act on control signals to operate motors, fans and other loads. When sensing, signal processing and actuation are integrated into compact semiconductor devices, designers can build systems that both interpret conditions at the equipment and respond to them.

This approach is often described as edge sensing and edge driving: measurement and action take place near the application, rather than relying exclusively on a central controller. The principle is relevant across industrial automation, even though many of the examples in Melexis’ 2018 annual report focus on automotive systems. The same broad engineering challenges—reliable measurement, efficient integration and dependable actuation—also arise in factory equipment and other automated applications.

Industrial sensors and drivers connect control systems to equipment

A sensor starts with a physical quantity and produces a signal that a control system can use. A driver takes a control signal and helps translate it into an electrical action, such as operating a motor. Many semiconductor solutions combine analog and digital functions: the device receives or generates an analog signal while using digital processing to condition, interpret or communicate information.

This combination can simplify an electronic design. Instead of treating detection, processing, activation and communication as separate tasks, an integrated chip can bring several of them together. The system still has to be defined around its application and operating conditions. Relevant inputs can include temperature, current and pressure, while mechanical and electrical requirements shape how the chip is designed and tested.

For engineers and system integrators, the practical consideration is not simply whether a sensor can measure a variable. It is how the measurement fits into the complete control path: how the signal is conditioned, how it reaches the controller, and how the resulting command operates the equipment.

Contactless magnetic sensing for position and current

Magnetic sensors are used to detect movement, position, speed and current. Hall-effect devices can measure position without physical contact, making them suitable for applications where a mechanical switch or contacting sensor may be less appropriate. The report describes magnetic sensing in vehicle pedals, throttle and steering systems, gear selection and electric current measurement, as well as in motors and other equipment.

Contactless measurement avoids the wear associated with a sensor that depends on physical contact. Magnetic sensing designs also need to account for the surrounding magnetic environment. The report identifies resistance to stray fields as an important consideration in modern electrified vehicles, where electrical systems can create additional magnetic fields. For automation designers, the broader lesson is to evaluate the sensor in its installed environment—not only under ideal or isolated conditions.

Magnetic sensors can also replace some mechanical switches. The report gives examples including seat-belt buckles and brake and clutch pedals, and describes magnetic latch and switch devices used in applications such as motor control and position detection. In each case, the sensing method should be matched to the required function, available space and system design.

Time-of-flight and thermal sensing expand system awareness

Not every automation task depends on contact or a moving magnet. Time-of-flight (ToF) sensors support contactless detection of people and objects by measuring distance. The report identifies gesture recognition, driver monitoring and object detection as applications, and notes that ToF technology can be used in environments with challenging backlight or sunlight. Comparable sensing needs arise wherever a machine must detect an object or person without a physical switch.

Thermal sensing provides another kind of awareness. Far-infrared sensor arrays can measure temperature across multiple zones. The report describes potential uses including multi-zone climate control, passenger classification and driver monitoring, as well as low-resolution thermal measurement in building automation and industrial settings. These examples show how a sensor’s value depends on the information an application needs: a single temperature reading, a spatial pattern or the presence of an object each calls for a different sensing approach.

Smart motor drivers support controlled actuation

Sensing is only part of the control loop. Once a controller has interpreted information and selected a response, a driver helps operate the actuator. Brushless DC motors are used in equipment such as pumps, blowers, fans and positioning actuators. In vehicle HVAC systems, small actuators redirect airflow; elsewhere, fans and pumps perform cooling or fluid-moving tasks.

Driver functions can address characteristics that matter to the application, including motor speed, commutation, electromagnetic interference and acoustic noise. The report describes fan-driver designs with closed-loop speed control and adaptive commutation, as well as devices intended for low-noise operation. These are examples of design features, not universal properties of every motor driver. Engineers should verify that a selected device’s capabilities align with the motor, operating conditions and system requirements.

Communication also matters when multiple electronic modules coordinate their work. The report discusses LIN for low-speed vehicle networks and describes its role in reducing the bill of materials in some applications. In industrial systems, the relevant communication architecture will depend on the equipment and control design, but the underlying requirement is similar: sensing and actuation nodes need an effective way to exchange the information required for coordinated operation.

Design integration begins with application requirements

Integrated semiconductor solutions do not remove the need for careful engineering. A robust development process begins by defining the chip’s functions and operating conditions, then proceeds through circuit design, physical layout, wafer fabrication, packaging and testing. The report describes testing at wafer level and testing packaged chips at multiple temperatures. Together, these stages illustrate why component selection should consider operating range, packaging and qualification alongside the headline sensing or driving function.

Designers should also consider the wider system: the sensor’s position, the conditions it will encounter, the controller interface, the actuator load and the communication path. The right degree of integration can simplify a design, but it must still meet the application’s requirements.

Conclusion: connect measurement to action

Industrial sensors and drivers form a practical chain from physical measurement to controlled response. Magnetic, pressure, thermal and ToF sensing address different kinds of information, while motor drivers translate electronic commands into movement. Integrating these functions can support compact, capable automation nodes, but successful deployment depends on matching the technology to the environment, operating conditions and control architecture. For engineers and operations teams, the key is to assess the complete sensing-and-actuation path—not just the individual component.

Access Official Technical PDF

About The Author