Access Official Technical PDF

Share Summary:LinkedInEmail

Industrial servo systems are most effective when controllers, amplifiers, motors and communications are selected as parts of a coordinated motion-control architecture. For automation engineers and system integrators, this means looking beyond individual component ratings to consider axis count, control complexity, positioning requirements, machine layout and integration with the wider automation system.

Applications ranging from packaging and material handling to machine tools and semiconductor equipment place different demands on motion. A practical selection process starts with those demands, then matches the controller and drive configuration to the work the machine must perform.

Industrial servo systems are a complete motion-control solution

A servo motor does not operate in isolation. A typical system combines a controller that issues motion commands, a servo amplifier that drives the motor, and the motor and feedback devices that execute and report motion. Networks and engineering software support communication, configuration and commissioning.

System-level performance depends on how these elements work together. For example, a machine requiring coordinated multi-axis movement may need a different controller and network arrangement from one performing straightforward point-to-point positioning. The selected architecture also affects wiring, programming, expansion and how motion control integrates with PLC and HMI functions.

Common application demands include:

  • Accurate positioning and synchronization for assembly, printing, converting and machine-tool operations.
  • Fast, repeatable movement for pick-and-place, mounters and material-handling equipment.
  • Controlled feed or tension in packaging, winding and processing machinery.
  • Flexible motion profiles, including cam, synchronous, interpolation, speed and torque control where supported by the chosen controller and drive.

Match the controller to the motion task

Controller selection should reflect both the number of axes and the type of motion required. A PLC with built-in positioning or a positioning module can suit simpler pulse-command applications. Simple Motion modules add functions such as positioning, synchronous control, cam operation and speed-torque control. Motion controllers support more advanced motion tasks and can operate across larger axis configurations, depending on the model.

Network choice is another architectural decision. Pulse-train interfaces can provide a direct command path for positioning applications. Networked systems, including SSCNET III/H and CC-Link IE Field Network, can connect compatible controllers and servo amplifiers for coordinated motion and system communication. Compatibility is model-specific, so engineers should verify supported interfaces and functions before finalizing a design.

Consider the following during controller selection:

  • How many axes need to operate, and whether they require synchronized motion.
  • Whether the machine needs point-to-point positioning, electronic camming, interpolation or torque control.
  • Which controller platform is already used for PLC and machine logic.
  • How the servo system will communicate with other automation equipment.

Choose servo amplifiers and motors for the machine

Servo amplifier families may offer different command interfaces, control modes, power ranges and network compatibility. Some models support pulse-train or analog commands; others are designed for specific motion networks. Certain amplifiers also include positioning functions, which can reduce the need for a separate positioning module in suitable applications.

Motor selection is equally application-dependent. Rotary motors are available in different capacity and inertia ranges, while linear and direct-drive motors can address applications that require different mechanical arrangements. A low-inertia motor may suit high-throughput positioning, while a medium-inertia design may be appropriate for a machine with a larger load inertia. Space, load characteristics and the required motion profile should guide the choice rather than motor capacity alone.

Feedback resolution, environmental protection and mechanical fit are also relevant. The catalog describes high-resolution encoders on many motor series, with a different resolution specified for the HG-AK series. Motor protection ratings vary by series, and mounting details or cable options may differ. Confirm the specifications of the exact motor and amplifier combination for the installation conditions.

Use tuning, safety and diagnostics as design considerations

Commissioning and ongoing operation are part of the system design. The described servo amplifier functions include one-touch tuning, vibration suppression and machine resonance filters. These tools are intended to help adjust servo response and address machine vibration, but their applicability depends on the model and machine conditions. Tuning remains a machine-specific task; engineers should validate operation under the intended load and operating profile.

Safety functions can also influence system architecture. The catalog describes Safe Torque Off (STO) and Safe Stop 1 (SS1), with safety levels dependent on the configuration and compatible safety equipment. Additional functions and safety levels may require a functional safety unit, compatible motor or safety controller. Safety design should therefore be based on the applicable product documentation and machine risk assessment, not on a function name alone.

For maintenance, drive data recording and machine diagnosis functions can help investigate alarms or monitor changes in characteristics such as friction, vibration and load. These functions provide information for troubleshooting and maintenance planning; they do not remove the need for inspection or appropriate maintenance procedures.

Account for energy use, space and future changes

Multi-axis amplifiers can reduce installation space and wiring compared with using separate amplifiers for each axis, where the selected model and application allow. Common DC bus arrangements can also let regenerative energy from a decelerating axis support other axes. A power regeneration converter can return regenerative energy to the supply. These approaches require appropriate system design and compatible equipment.

Machine upgrades deserve similar attention. Some product combinations are designed to support replacement of earlier servo generations, but mounting dimensions, cables, power ratings and interfaces can vary. Check transition documentation and the exact hardware before assuming existing wiring or mounting arrangements can be reused.

Build the architecture around the application

The practical takeaway is to specify a servo system as an integrated solution. Start with the machine’s motion requirements, then evaluate controller capability, amplifier interface, motor characteristics, network compatibility, safety needs and installation constraints together. This approach helps avoid selecting components that meet individual specifications but do not form the right system for the application.

Access Official Technical PDF

About The Author