Selecting an inertial navigation system (INS) is not simply a matter of comparing accuracy figures on supplier datasheets. Performance depends on the inertial sensors, the way the system processes their measurements, the operating environment, and whether external aiding is available. For engineers and integrators, understanding these factors is essential to matching a system to its intended use and evaluating whether published specifications reflect real operating conditions.
Start with the application and operating environment
An INS uses gyroscopes to measure angular motion and accelerometers to measure specific force. Its processing combines these measurements to estimate attitude, heading, velocity, and position from an initial reference. Because small sensor errors are integrated over time, the system’s performance can change substantially with operating duration and motion.
Define the intended application before reviewing product specifications. A system operating on a road vehicle, aircraft, vessel, drill, or underground surveying platform faces different dynamics and constraints. Consider expected vibration, temperature range and gradients, motion profile, measurement duration, and whether the platform can stop periodically. A system that performs well in a controlled laboratory or low-dynamic test may not deliver the same results under field conditions.
Also establish whether GNSS will be continuously available, intermittently available, or unavailable. If the application must continue through jamming, spoofing, signal blockage, or other GNSS outages, assess performance specifically for those conditions—not only for periods when satellite positioning is healthy.
Understand the operating mode: unaided or aided
In unaided, or free inertial, operation, the INS receives no external position or velocity corrections. Sensor errors accumulate, causing velocity and position errors to grow over time. The rate and pattern of error depend on factors such as accelerometer offset, gyro drift, initial alignment, and motion. Long-term free-inertial behavior can include Schuler oscillation, with a period of about 84 minutes, so a drift figure is meaningful only when its measurement method and duration are clear.
Aided navigation combines inertial measurements with complementary information. A Kalman filter or another sensor-fusion method may use GNSS, wheel sensors or odometers, Doppler velocity, air data, or other inputs. The inertial sensors provide responsive short-term estimates, while external measurements can constrain accumulating errors. The resulting performance depends on the quality and availability of those inputs, as well as whether the platform’s motion provides enough information for the filter to estimate relevant states.
On land vehicles, motion constraints and periodic zero-velocity updates (ZUPTs) can provide additional information. These are not interchangeable with unrestricted, unaided navigation: a ZUPT requires the vehicle to be stationary, and motion-constrained approaches rely on assumptions about platform behavior. Make sure the stated operating mode matches what your application can actually provide.
Compare sensor specifications in context
Individual datasheet values matter, but they should be interpreted in relation to the complete system and its use. Key parameters include:
- Gyro bias and drift: These affect attitude estimates over time. With velocity or position aiding, some errors can be estimated and corrected, subject to the available motion and sensor information.
- Gyro scale factor and axis misalignment: Scale factor errors affect angular measurements during rotation, while misalignment can couple motion on one axis into another.
- Accelerometer offset: Offset affects gravity measurement and initial leveling, and can contribute to velocity and position errors.
- Angular random walk: This describes gyro noise and influences angle uncertainty and north-seeking performance. Check the units and conversion method when comparing datasheets.
- Bandwidth, sampling, and timing: Sensor bandwidth, internal sampling rate, synchronization, time stamping, and output latency matter in dynamic applications and control systems.
Sensor technology also involves trade-offs. MEMS, fiber-optic, ring-laser, and resonator gyros have different performance characteristics and sensitivities to factors such as vibration, temperature, size, and cost. Evaluate these characteristics against the actual environment rather than assuming a sensor category alone determines system performance.
Check whether alignment and heading claims fit the setup
An INS needs an initial position and orientation. Position may come from GNSS or another reference, while alignment can be static or performed during motion. Static roll and pitch estimation relies on accelerometers measuring gravity accurately enough. Determining true heading while stationary may require gyroscopes capable of gyrocompassing or a dual-antenna GNSS arrangement.
Do not confuse true heading—the direction the platform is pointing—with course over ground, which describes its direction of travel. A single GNSS antenna can provide motion direction when the platform is moving, but that does not by itself establish the vehicle’s heading. With a single-antenna GNSS-aided INS, heading estimation may require sufficient movement and changes in direction. Without such excitation, the heading state may not be observable.
Validate performance claims with the right tests
Published accuracy figures are difficult to compare when suppliers use different test conditions, durations, aiding sources, or statistical measures. Ask whether results are absolute errors, standard deviations, or percentile measures, and whether they represent real-time or post-processed output. Clarify the initial alignment procedure, temperature conditions, vibration exposure, and any external inputs used during testing.
For a short unaided run, basic error relationships can help assess whether claims are physically plausible. An accelerometer offset can create a position error that grows approximately with the square of time. An attitude error also misprojects gravity onto the horizontal axes, contributing an error that grows approximately with time squared. Gyro error can affect position through changing attitude, with its influence increasing rapidly over time. These simplified relationships are not a substitute for a full system analysis, but they can flag specifications that deserve closer examination.
Where possible, test the INS in the intended installation and operating environment. Include GNSS interruptions, representative motion, vibration, and temperature conditions. Avoid relying only on a closed-loop route whose endpoint can conceal errors accumulated along the way; assess the trajectory against an independent reference when available.
Make the decision around mission requirements
A sound INS selection begins with a precise definition of operating conditions and required outputs. Compare sensor characteristics, system-level fusion, alignment behavior, aiding dependencies, and test methods—not isolated headline numbers. The practical question is whether the system can deliver usable, dependable estimates throughout the mission, including periods when external references are degraded or absent.
By separating free-inertial, motion-constrained, and aided performance, and by validating specifications under representative conditions, industrial teams can make more informed technical and economic decisions. That due diligence helps ensure the selected inertial navigation system is suited to the application rather than merely to the assumptions behind its datasheet.