Access Official Technical PDF

Share Summary:LinkedInEmail

IoT device security is a design requirement, not a feature that can be safely deferred until deployment. Every connected device adds a potential entry point to a network, while weaknesses in credentials, encryption or firmware can put data and device operation at risk. The stakes are especially high in medical systems, where connected equipment can influence patient monitoring and treatment. The same design principles matter to industrial automation teams responsible for connected equipment, edge devices and the data those systems exchange.

A useful way to approach security is to consider the entire device lifecycle: design, manufacturing, commissioning, operation and end-of-life. Public Key Infrastructure (PKI) can help provide identity and trust across those stages, but it works best when security requirements are established early and matched to the device’s hardware and operating constraints.

Why IoT device security must start at design

IoT devices connect physical equipment with digital systems. They may collect measurements, communicate with applications or gateways, and receive software or firmware updates. If an attacker gains access to a device or its communications, the consequences can extend beyond the device itself. Data could be intercepted or modified, and changes to software or firmware could affect how the device functions.

Medical devices illustrate the importance of this risk. Connected insulin pens and other equipment may have limited processing or data capabilities, but that does not make their security unimportant. The relevant question is not only how sophisticated a device is, but what information it handles and what systems or decisions depend on that information.

For industrial organizations, the practical lesson is similar: assess a device in the context of its connections and role. Security planning should account for how it authenticates to other devices and applications, protects data in transit and at rest, verifies software, and handles updates over time.

Common weaknesses in connected devices

Several recurring design choices can create avoidable security exposure:

  • Weak authentication: Limited device resources or a focus on cost can lead to insufficient attention to authentication. Yet a device’s access to data and connected systems should inform the level of protection required.
  • Hard-coded credentials: Passwords or keys embedded in source code can simplify access during development or deployment. If those credentials are discovered or exposed, they may provide a route into the device or system.
  • Shared or poorly protected keys: Symmetric encryption uses the same key to encrypt and decrypt data. If a key is exposed on a device or connected endpoint, the security of the wider system may be affected. Asymmetric encryption uses a related public and private key pair, but the private key still needs secure storage.
  • Weak encryption implementation: Encryption depends on suitable algorithms, keys and sources of randomness. Devices with limited resources may have difficulty generating the random input needed for strong keys, so cryptography must be selected and implemented with the hardware in mind.
  • Unsigned firmware: Without a way to verify code authenticity and integrity, a device may lack an important check on software or firmware introduced during production or updates.

How PKI supports IoT cybersecurity

PKI is a framework of hardware, software, policies and procedures for managing digital certificates and public-key encryption. In an IoT deployment, certificates can give devices a digital identity that other devices and applications can verify. This supports mutual authentication: each side can check the identity of the other before communicating.

PKI can also contribute to encryption and signing processes. Used appropriately, these capabilities help protect data exchanged between connected systems and support checks on firmware integrity. They can also form part of a process for updating credentials and cryptographic material during a device’s service life.

PKI is not a substitute for sound implementation. Manufacturers and system designers need to decide where trust originates, how credentials are provisioned, and how private keys are protected. Device hardware, connectivity at the factory, applicable regulations and the intended lifecycle all shape those choices.

Plan security across the device lifecycle

Security requirements should be translated into specific decisions at each stage of a device’s journey:

  • Design: Define a policy for unique device identities and select cryptographic libraries suited to hardware capabilities and design constraints.
  • Manufacturing: Plan how credentials will be embedded. Where possible, consider on-device key generation and a hardware root of trust to protect private keys.
  • Commissioning: Authenticate devices with the other trusted devices and applications they need to communicate with.
  • Operation: Manage keys and trust anchors over time, and use digital-signature verification as part of firmware update and secure-boot processes.
  • End-of-life or ownership change: Plan how certificates will be revoked or replaced when a device changes ownership or leaves service.

These choices need to fit manufacturing realities as well as technical goals. Teams should establish whether certificates will come from an internal PKI, a public certificate authority or a managed PKI, and where certificates will be stored—for example, in a trusted platform module or secure element. They should also determine whether certificates are generated at the factory or provided in advance, and set certificate lifetimes, key sizes and algorithms according to security risks and applicable requirements.

Make security a lifecycle responsibility

Security is particularly difficult to retrofit across large, diverse IoT deployments. Differences in hardware, software and communication protocols can make a deploy-first approach expensive and complex to correct later. Establishing identity, authentication, encryption and update requirements during design gives manufacturers and integrators a clearer foundation for deployment and ongoing management.

For industrial automation decision-makers, the practical implication is to include security in device selection, integration planning and lifecycle processes—not treat it as a one-time procurement check. A well-considered PKI approach can support trusted device communication and protected updates, but it must be paired with secure credential handling and choices suited to the device. Building those decisions in from the start helps limit avoidable exposure as connected devices move from the factory floor into service and eventually out of use.

Access Official Technical PDF

About The Author