The Kinetix 3 servo drive is a component motion-control option for smaller applications with a low number of axes. Its compact format and range of output ratings make it relevant to equipment such as indexing tables, medical manufacturing systems, laboratory automation and semiconductor processing. Selecting a drive involves more than matching motor power: engineers must also check input requirements, feedback cable length, enclosure heat dissipation, protection and installation conditions.
The specifications below provide a practical framework for evaluating the Kinetix 3 in a machine design. Final selection and installation should be checked against the applicable drive and user documentation, as well as electrical codes and local requirements.
Kinetix 3 servo drive power and control ratings
The drive family covers continuous output power from 50 W to 1.5 kW across catalog numbers 2071-AP0 through 2071-A15. Depending on the model, continuous output current ranges from 0.61 to 9.90 A rms, while peak output current ranges from 1.80 to 29.69 A rms. These ranges help narrow the appropriate drive size, but the application’s motor, load profile and motion requirements still need to be considered together.
AC input is specified at 170–264 V rms and 47–63 Hz. Input phase varies by model: the family includes single-phase, three-phase/single-phase and three-phase options. Confirm the phase requirement for the specific catalog number rather than assuming all models accept the same supply configuration.
Other family-level specifications include a nominal DC bus output of 311 V, a 10 kHz PWM frequency and 90% efficiency. The listed bus overvoltage and undervoltage thresholds are 405 V DC and 190 V DC, respectively. Velocity- and current-loop bandwidth figures are 550 Hz and 2000 Hz; actual bandwidth depends on tuning parameters and mechanical components.
Plan power protection and enclosure heat dissipation
Branch-circuit protection is a separate design responsibility. The drive provides integral solid-state short-circuit protection, but it does not provide branch-circuit protection. The manufacturer specifies that branch protection must be provided in accordance with the National Electrical Code and any additional local codes. Fuse and contactor selection should be coordinated with the drive and applicable requirements; use the documentation for the specific model to verify component recommendations.
Heat dissipation is another important selection and layout consideration. Published power-dissipation values vary with drive size and percentage of rated output. For example, the 2071-AP0 is listed at 19.3 W at 20% output and 22.0 W at 100%, while the 2071-A15 is listed at 37.4 W and 93.9 W at those respective operating points. Use the applicable model’s figures to estimate enclosure heat load and required ventilation; do not size the enclosure from output power alone.
Check feedback cabling and installation space
Although motor power and feedback cables are available in standard lengths up to 90 m (295.3 ft), the maximum feedback cable length for the Kinetix 3 drive is 30 m (98.4 ft). The published compatible motor, actuator and linear-motor combinations also specify a 30 m feedback limit. The figures assume recommended cables, so verify the cable type and connection arrangement when planning machine layouts.
Drive dimensions and weight depend on the catalog number. The smaller 2071-AP0 is approximately 153 mm high, 141 mm wide and 48.3 mm deep, with an approximate weight of 0.70 kg. Larger models include the 2071-AP8, 2071-A10 and 2071-A15, which have a listed height of 198 mm and depth of 59–81 mm, depending on model. Allow for the required mounting hardware and any accessory boards, which increase drive depth.
Mounting-hole fasteners also vary across the family: M4 x 10 bolts are specified for the 2071-AP0 through 2071-AP4, and M5 x 10 bolts for the 2071-AP8, 2071-A10 and 2071-A15. Check the mechanical drawing for the exact drive dimensions and mounting arrangement before finalizing a panel or enclosure layout.
Environmental limits and protection considerations
The operating ambient temperature range is 0–50 °C, with relative humidity from 5–95% noncondensing. The stated operating altitude is 1000 m; operation up to 3000 m is identified with derating. Storage temperature is -25 to +85 °C, and the storage humidity range is also 5–95% noncondensing. Vibration and shock limits are specified in the product data and should be reviewed where machinery is exposed to significant movement or impact.
The drive is listed to UL 508 C when marked, and the published certifications also identify CE, C-Tick and KC requirements or registrations. Certification applicability depends on product marking and the intended market. The drive also provides adjustable solid-state motor overload protection; consult the user manual for setup details and application-specific guidance.
Using breakout boards and feedback accessories
Optional drive-mounted breakout boards can simplify connections when flying-lead cables are used. The 2071-TBMF motor feedback breakout board supports specified flying-lead feedback cables and applications with high-resolution encoder feedback. With a customer-supplied 3.6 V lithium battery installed, it provides multi-turn encoder operation for TL-Series motors.
The 2071-TBIO I/O breakout board provides access to 24 commonly used terminals on the 50-pin IOD connector. Both boards affect installation dimensions: the listed depth increase is 29 mm, and the motor feedback board adds 32 mm of height. Include these allowances in mechanical planning and confirm wiring requirements for the selected accessory.
Make selection a system-level decision
The Kinetix 3 is intended for compact, lower-axis-count motion applications, but a suitable drive choice depends on the complete system. Match the catalog number to motor and load requirements, verify supply phase and branch protection, account for enclosure heat dissipation, and keep feedback cables within the 30 m limit. Checking mounting dimensions, environmental conditions and accessory clearances early can also help prevent avoidable panel and commissioning changes.