Access Official Technical PDF

Share Summary:LinkedInEmail

Laser trimming thick-film resistors provides a way to adjust resistance after the resistor material has been printed and fired. That sequence matters: the firing process can make it difficult to hold the desired resistance tolerance through fabrication alone. A laser can then be used to remove material and bring a resistor closer to its target value. The choice of laser and its interaction with the materials are central to making that adjustment controlled and repeatable.

Why trim thick-film resistors after firing?

In the process described for these resistors, compounds of noble metals are applied to a glazed substrate using screen-printing techniques and then fired. The resistance value is affected by the manufacturing process, and the required tolerance may not be achievable simply by controlling the firing step. Trimming after firing provides a further opportunity to adjust the finished element.

This approach separates two tasks: producing the printed resistor structure and correcting its resistance. The first establishes the element on the substrate; the second fine-tunes its value by removing material. For engineers specifying or evaluating resistor production, the practical point is that the trim operation must be considered alongside the resistor material and substrate—not as an independent step.

The available description focuses on laser trimming of metal-film resistors made using a thick-film process. It does not provide a particular resistor geometry, target tolerance, or trim pattern. Those details should therefore be established for the specific design rather than assumed to be universal.

How laser properties affect the trimming process

Laser radiation is described by three properties relevant to material processing: it is monochromatic, coherent, and capable of high average and peak power. These characteristics provide options for matching the laser to the material and for concentrating energy where material removal is required. In this context, trimming depends on directing laser energy to the resistor structure so that material can be removed through evaporation.

Wavelength selection is especially important. The material does not interact with every wavelength in the same way: its absorption and transmission characteristics influence how efficiently the laser energy is used. The ceramic materials discussed in the process have high absorption in the infrared region, which supports the use of infrared lasers for this application.

CO2 and Nd:YAG laser options

Two laser types identified for resistor trimming are CO2 and Nd:YAG. The CO2 laser operates at a wavelength of 10.6 micrometres, in the far-infrared region. The Nd:YAG laser operates at 1.06 micrometres, in the near-infrared region. Both are considered in relation to the absorption properties of the materials being processed.

The described application selects an Nd:YAG laser. Its shorter wavelength can be focused to a smaller spot than a longer wavelength, as indicated by the relationship between wavelength and spot diameter. A smaller focused spot gives the process a smaller area over which to apply the laser energy. That makes spot size a relevant factor when considering how the resistor is trimmed, although the available information does not specify a spot diameter or a particular cut geometry.

Laser choice is therefore not simply a matter of selecting the source with the greatest power. The material’s absorption and transmission, the wavelength, and the focused spot all affect how the energy is delivered. A suitable selection must take the substrate and resistor film into account.

Process considerations for engineers

When evaluating a laser-trimming process, engineers and system integrators can use the described principles to frame practical questions:

  • What materials are being trimmed? The resistor film and the glazed ceramic substrate have distinct roles in the structure, so their interaction with the laser matters.
  • How does the material respond at the selected wavelength? Absorption and transmission determine how effectively laser energy is used.
  • What spot size is appropriate? Wavelength influences the smallest focused spot, which in turn affects the area where energy is applied.
  • At what stage is resistance adjusted? Trimming after firing addresses the difficulty of achieving the required tolerance through firing alone.

These are selection and process questions, not a complete operating recipe. The information available does not state laser settings, removal rates, electrical measurement methods, or allowable resistance change per trim. Such parameters cannot be inferred from wavelength alone and must be defined for the specific materials and production requirements.

Conclusion: match the laser to the resistor structure

Laser trimming can provide a post-firing adjustment for thick-film resistors when manufacturing alone does not deliver the desired tolerance. The key principle is to match laser wavelength to material response, while accounting for the focused spot and the construction of the resistor on its substrate. For industrial electronics teams, this means treating the laser, resistor film, and ceramic base as parts of one process. Careful material and wavelength selection is the foundation; specific operating conditions must be established for the particular application.

Access Official Technical PDF

About The Author