Access Official Technical PDF

Share Summary:LinkedInEmail

Lighting designers and luminaire manufacturers need an LED linear module that balances color quality, output, mechanical fit, and reliable electrical and thermal integration. Seoul Semiconductor’s SunLike SMJD-2423072G-XXN1 is a 560 mm module intended for residential and commercial lighting, as well as linear high-bay applications. Its published specifications describe a high-CRI light source with several nominal color-temperature options and a defined set of driver, temperature, and handling requirements.

LED linear module: light output and color options

The module is specified with a minimum CRI of 95 and a 3-step color consistency designation. These characteristics make color rendering and consistency central considerations when selecting the engine for a luminaire. The specification lists nominal CCT options of 2700 K, 3000 K, 4000 K, and 5000 K.

At the stated test condition of 900 mA and an ambient temperature of 25°C, the listed typical luminous flux is 2,000 lm for the 2700 K and 3000 K variants, and 2,200 lm for the 4000 K and 5000 K variants. The corresponding typical efficacy values are 90 lm/W for the warmer CCT options and 95 lm/W for the 4000 K and 5000 K options. These are typical values, not guaranteed outputs for every operating condition; the document’s measurements are based on constant typical current at 25°C.

The specification also provides CCT measurement ranges around each nominal value: 2725 K ±145 K for 2700 K, 3045 K ±175 K for 3000 K, 3985 K ±275 K for 4000 K, and 5028 K ±283 K for 5000 K. Product selection and bin information should be checked when color matching across modules is important.

Electrical integration and driver selection

The module is designed to operate from a DC source and is recommended for use with a constant-current source (CCS). The electro-optical data is characterized at 900 mA, with an input-voltage range of 23–29 VDC and a typical forward voltage of 26 V at that current. Typical power consumption is 23 W, with a listed range of 20–26 W under the specified test conditions.

Driver selection must account for both current regulation and output-voltage limits. The manufacturer advises limiting the maximum output voltage of the constant-current source with reference to the module specification. It also recommends a qualified LED driver without significant output overshoot, along with current limiting. The module itself has no built-in current regulator, so designers should not assume it will equalize current between parallel-connected engines. Forward-voltage variation can lead to uneven loading in parallel arrangements.

During wiring and assembly, observe polarity and do not connect the LED driver to mains power while making connections. The module is identified as not being a safety extra-low-voltage (SELV) engine. System-level electrical safety and driver selection therefore need to be addressed as part of luminaire design.

Thermal management and operating limits

Thermal design is a key integration task. The specified operating-temperature range is -40°C to 98°C at the designated case-temperature point on the PCB. The manufacturer states that the case temperature, or Tc, should remain below 98°C for proper operation. The listed thermal resistance from Tc to the base is 0.3°C/W.

Measure temperature at the specified Tc point rather than relying only on ambient temperature. The document’s performance data is measured at an ambient temperature of 25°C, but the allowed case temperature is a separate limit that must be verified in the assembled luminaire. The specified storage-temperature range is also -40°C to 98°C, with no power applied.

Mechanical fit and application planning

The module measures 560 mm long, 18 mm wide, and 5.4 mm high. Dimensional tolerances are ±0.5 mm for length, ±0.3 mm for width, and ±0.3 mm for height; the PCB thickness is 1.0 mm ±0.1 mm. These dimensions and the Zhaga-standard mounting pattern support mechanical planning around industry-standard attributes, but integrators should still verify mounting, clearance, and thermal paths in the intended fixture.

Potential applications listed for the module include residential and commercial lighting and linear high-bay luminaires. Its elongated format may suit linear designs, while the chosen CCT, light output, driver, and thermal arrangement must be matched to the specific luminaire requirements.

Handling, ESD, and storage precautions

LEDs can be affected by electrostatic discharge (ESD) and electrical overstress (EOS). The module specification lists ESD sensitivity of ±8 kV for IEC air discharge and ±4 kV for the human-body model. Recommended ESD controls include antistatic work surfaces and storage containers, ionizing fans, wrist straps, antistatic footwear or clothing, and humidity control.

To reduce the risk of electrical overstress, follow the driver and current-limiting recommendations and avoid excessive output-voltage overshoot. Inspect the module before assembly; do not use an engine with a cracked lens or damaged wire. Do not detach the lens, modify the module, or allow the lens to contact rough or sharp objects. The manufacturer also advises against using materials containing sulfur and warns against extending the cable excessively for long-term use.

For storage, avoid impact and pressure that could damage the lens. Keep unused devices in their supplied antistatic bag; if it has been opened, reseal it to limit exposure to air and moisture.

Conclusion: verify the complete luminaire design

The SunLike SMJD-2423072G-XXN1 combines a long, narrow form factor with CRI 95, four nominal CCT choices, and specified flux and efficacy at a 900 mA test current. Successful integration depends on more than selecting the desired color temperature: use an appropriate constant-current driver, respect voltage and current limits, verify Tc below 98°C, and apply suitable ESD, EOS, handling, and storage controls. Checking these details at the module and luminaire levels helps engineering teams assess whether it fits their lighting design.

Access Official Technical PDF

About The Author