Lithium-ion battery design is a system-level engineering challenge. Cell chemistry influences energy and power characteristics, but the finished battery also depends on how cells are packaged, connected, monitored and kept within suitable operating conditions. For automation engineers, integrators and operations leaders assessing energy storage, understanding these layers helps clarify the trade-offs between performance, safety, material use and end-of-life handling.
A European Commission preparatory study published in 2019 examined battery technologies and improvement options using 2018 as its reference period. Its findings offer a useful framework for thinking about battery architecture: improvements can come from individual cell materials, from system components, or from the way the whole product is assembled and managed.
From cell to complete battery system
A battery system is built up in stages. Within a cell, the cathode and anode store and release energy through electrochemical reactions. A separator keeps the electrodes apart, while electrolyte enables lithium-ion transport. Cells are then connected in series or parallel to provide the voltage and capacity needed by an application. Multiple cells form modules, which are combined into a system with supporting structure, connections and control equipment.
Additional components are not peripheral to performance. The enclosure protects electrical and mechanical parts from environmental exposure and can provide protection from physical damage. Busbars and terminals connect cells or modules, while fuses and contactors help manage electrical faults and isolation. Cooling or heating equipment supports operation within a suitable temperature range.
Cell chemistry and format shape design choices
Different cathode chemistries involve different balances. The study describes lithium nickel manganese cobalt oxide (NMC), nickel cobalt aluminium oxide (NCA) and lithium iron phosphate (LFP), among others. Their characteristics vary in areas such as energy density, thermal stability, cost and service life. Consequently, a chemistry that suits one duty or installation constraint may not be the best fit for another.
Graphite is a common anode material. Adding silicon to graphite can increase anode capacity, but silicon’s substantial volume change during cycling creates mechanical stresses and can contribute to capacity loss. The design challenge is therefore not simply to maximize a material’s theoretical capacity; it is to manage durability and manufacturing constraints as well.
Cell format also affects packaging and heat transfer. Cylindrical, prismatic and pouch cells each have different structural characteristics. Pouch cells can dissipate heat effectively through their current collectors, but need support in a module because the pouch itself is not rigid. Cylindrical cells are mechanically stiff, while their geometry can affect packing density at module level. Prismatic cells offer a different balance of shape and structural support. The appropriate choice depends on the intended system layout and thermal design.
Battery management and thermal control
The battery management system (BMS) monitors conditions such as cell voltage, current and temperature. It uses this information to support charging and discharging, balance cells and help prevent unsafe operating conditions. State of charge (SOC) is one important output: it indicates the battery’s charge level and can inform operating decisions. Without appropriate control, differences between cell charge states can interfere with system operation.
Thermal management is closely linked to both performance and ageing. High temperatures can accelerate material degradation and, if not controlled, contribute to thermal runaway. Low temperatures can restrict current flow as electrolyte conductivity falls. Depending on the application, a system may need to cool or heat cells, using air or liquid-based approaches. That equipment affects the design and energy use of the complete system, so thermal requirements should be considered alongside cell selection rather than treated as a separate afterthought.
Where battery improvements can come from
The study identifies several routes to improvement. Some target active materials: nickel-rich cathodes were considered for their potential to increase energy density and reduce cobalt content, while silicon-containing anodes were being developed to raise capacity. Other options focus on cell construction, including thicker active-material layers or reducing the amount of inactive material such as binders and current collectors.
These approaches involve trade-offs. Thicker electrode layers can increase the proportion of active material, but may make processing more difficult and restrict ion transport or fast-charging performance. Thinner separators can reduce inactive material, but must still provide adequate mechanical and thermal stability. Material changes may also require adjustments to manufacturing processes, electrolyte formulations or other cell components.
The study distinguishes between best available technologies (BAT), commercially available at the time, and best not-yet-available technologies (BNAT), which were still under development or validation. It placed options such as increased electrode-layer thickness and some silicon additions among available improvement approaches, while technologies including all-solid-state batteries, high-voltage spinels and high-energy NMC were discussed as developing possibilities. These classifications describe the study’s historical assessment, not a current market ranking.
Designing for service life and end of life
Battery performance is only one part of a system’s lifecycle. The study noted that many batteries at the time were not designed for straightforward disassembly, repair or refurbishment. Products that are difficult to open can limit access to reusable components and make material recovery more challenging. The report also identified limited incentives for manufacturers to adopt design-for-circularity, despite interest from recyclers and ongoing technical work.
For project teams, this makes serviceability and end-of-life planning relevant design considerations. When comparing battery systems, consider not only the cell chemistry and operating controls, but also how modules are assembled, whether components can be accessed, and how the enclosure and connections affect dismantling. These factors can influence repair and recovery options after the first service life.
Practical implications for industrial decision-makers
Battery selection should begin with the application’s operating requirements, then evaluate the complete system rather than relying on cell-level specifications alone. Chemistry, format, module architecture, BMS functions, thermal controls and enclosure design all contribute to the final result. Improvements in one area may introduce constraints elsewhere, making system integration essential to sound decision-making.
For engineers and plant leaders, the practical takeaway is to assess performance, safety, serviceability and end-of-life needs together. A well-considered battery design is not simply a high-energy cell in a housing; it is an integrated system whose components and controls must suit the intended duty while accounting for maintenance and eventual material recovery.