Logic locking security is often described as a matter of keeping the correct key secret. In practice, that key depends on a chain of hardware components and supply-chain processes that can each create an opportunity for attack. A locked design may resist one method of key recovery yet remain exposed through scan infrastructure, physical probing or weaknesses in key storage. For semiconductor manufacturers and system designers, the practical challenge is to protect the full system rather than rely on a single countermeasure.
A defense-in-depth approach addresses that challenge by combining independent protection layers. Each layer targets different assets and attack paths, with the goal of making unauthorized access more difficult even if one safeguard is bypassed.
Why logic locking needs layered protection
Logic locking is a form of hardware obfuscation. Extra logic elements, known as key-gates, are added to a circuit, or the design’s state space is modified. The intended functionality becomes available when the correct key or key sequence is supplied. The key is typically programmed after fabrication, keeping it out of the hands of an untrusted manufacturing facility.
This model helps protect intellectual property in a supply chain where design, fabrication, integration and distribution may involve multiple organizations. But the key is not the only concern. An attacker may try to infer it from the circuit, observe it while it moves through the chip, recover it from storage or use test access to expose internal states. An adversary with physical access and failure-analysis tools may also examine the device directly.
Consequently, protecting against one class of attack does not establish comprehensive security. A design hardened against an oracle-guided attack, for example, may still be vulnerable to physical probing. Defense in depth treats these as connected risks and applies measures across the chip’s attack surface.
Identify the assets and attack paths
Effective protection starts with a clear view of what must be secured and how it can be reached. Core components of a logic-locked IC include:
- Key-storage element: Holds the unlocking key, often in non-volatile memory.
- Key-delivery unit: Reads, manages and routes the key to the logic that uses it, including registers and any required decryption circuitry.
- Interconnects: Carry keys and other sensitive information between storage and functional logic.
- Design-for-test (DFT) structures: Support manufacturing and validation tests but can also expose or control internal circuit states.
- Obfuscated hardware: The locked logic and any physical layout obfuscation used to hinder analysis or modification.
The threat model should consider the capabilities and access available to different parties across the supply chain, as well as the assets each could target. This analysis helps a design team select protection layers suited to its security objectives and its area, power and energy budgets.
Logic locking security across the chip
Secure key storage and handling
Non-volatile memory is commonly used to retain a key when the device is powered off, but physical access can expose weaknesses in different memory technologies. Depending on the implementation, analysis may reveal programmed states or stored charge. Even a tamper response that erases memory requires consideration of data remanence: residual physical information may remain long enough to be recovered.
Storage alone is not enough. The key must be transferred to the logic that needs it. Key registers, key-management logic and any decryption engine therefore become part of the security boundary. Designers should consider how those elements can be observed, manipulated or accessed during operation, rather than treating the memory as the only sensitive component.
Protect interconnects and test access
Interconnects can carry security-critical data through the chip and may be targeted by electrical probing. Physical shielding can make access harder, but sophisticated analysis may bypass or reroute around such barriers. Contactless optical probing can also reveal activity in on-chip registers and key-related logic while the device is operating.
DFT introduces a separate trade-off. Scan chains make internal states observable and controllable, supporting structural testing and fault diagnosis. Those same properties can assist attacks that seek keys or design information. Scan encryption, partial scan, scan obfuscation and changes to scan-chain organization have all been explored as countermeasures, but each has limitations. Some approaches can be weakened by reset or scan-flushing techniques; others can affect test coverage or require changes to the DFT flow. Security decisions must therefore account for both attack resistance and test requirements.
Consider oracle-guided and physical attacks
In an oracle-guided attack, an adversary can compare the locked design’s behavior with that of a functioning device to narrow down possible keys. SAT-based techniques use distinguishing inputs and output comparisons to eliminate incorrect key candidates. Other attacks exploit test access, signal probabilities or key sensitization.
Physical attacks follow different routes. An attacker may analyze the layout, probe key-carrying signals or inspect memory and circuit structures using failure-analysis capabilities. Layout obfuscation techniques, such as camouflaged cells and dummy structures, can increase ambiguity during reverse engineering, but they do not remove the underlying threat. A layered architecture should therefore avoid assuming that a successful defense against a logical attack also protects against physical access.
Build a practical defense-in-depth plan
A structured implementation can follow four steps:
- Analyze core components: Identify the sensitive assets, interfaces and possible ways to extract or alter them.
- Define the threat model: Assess potential adversaries, their access to the supply chain and their technical capabilities.
- Design protection layers: Match safeguards to vulnerabilities across storage, delivery, interconnects, DFT and the obfuscated design.
- Select and evaluate countermeasures: Balance security objectives against implementation costs, including area, power and energy, while accounting for test and operational needs.
The aim is not to assume that every attack can be eliminated by one technique. Instead, independent safeguards should reduce reliance on any single barrier and address unintended access paths as well as anticipated attacks.
Conclusion: Protect the system, not just the key
Logic locking can contribute to semiconductor IP protection, but its effectiveness depends on the security of the entire key lifecycle and the surrounding hardware. Key storage, delivery circuitry, interconnects, scan access and the obfuscated design each present distinct concerns. For engineering and operations teams, defense in depth means using a threat model to choose complementary safeguards, then evaluating their combined security alongside manufacturing, testing and design constraints. The result is a more complete protection strategy than relying on key secrecy or any single countermeasure alone.