Access Official Technical PDF

Share Summary:LinkedInEmail

Low-cost wireless sensors could help building operators gather the environmental data needed for more responsive HVAC and lighting control—without the installation burden of extensive new wiring. A research platform developed by Oak Ridge National Laboratory and Molex combines flexible printed sensing elements with code-phase-shift keying (CPSK) spread-spectrum communications. Its central engineering challenge is integration: creating sensors that are inexpensive to manufacture, straightforward to deploy and efficient enough to operate with harvested energy.

Why building monitoring needs more accessible sensors

Temperature, relative humidity, occupancy and indoor air quality measurements can inform how a building is operated. For example, occupancy data can support decisions about when to condition a space or switch lighting, while indoor air quality measurements can contribute to ventilation control. Sensors do not save energy on their own; they provide observations that building controls and operators can use to make decisions.

Deployment economics can get in the way. Wired installations add labor and infrastructure costs, while wireless devices still require installation, configuration and, in many cases, battery maintenance. Retrofitting existing buildings also presents practical challenges: sensor locations may be limited by existing wiring, and adding devices to established building automation systems can involve interoperability considerations. A flexible wireless platform is intended to make it easier to place sensors where measurements are useful, including in buildings without extensive automation infrastructure.

Low-cost wireless sensors start with printable materials

The platform explores printing sensor components onto flexible substrates such as polyimide. Additive processes deposit functional materials only where needed, offering a path to lightweight, thin and conformable devices. Inkjet printing is particularly suited to prototyping because patterns can be changed through digital design rather than a dedicated mask, and the process can use material efficiently.

Different manufacturing methods involve different tradeoffs. Screen printing can be fast and inexpensive, but offers less control over film thickness and pattern geometry. Spin coating can create uniform layers but does not provide the same spatial control. Lithographic techniques can achieve finer features, but require more process steps and pattern-specific masks. Inkjet printing therefore offers a useful balance of design flexibility and additive material deposition for sensor development, though it does not eliminate the need to optimize materials and processing.

The research demonstrated temperature and humidity sensing on flexible substrates, alongside work toward a broader multimodal platform. Printed conductive silver lines were also evaluated, and pulse thermal processing was explored as a way to process printed materials while limiting the heat exposure of the underlying substrate. These manufacturing approaches point toward a possible roll-to-roll production pathway, but the report presents the platform as a development effort rather than a finished, universally deployable product.

How CPSK spread-spectrum communication fits

A sensor network must transmit useful readings while keeping node power demand low. The project used CPSK, a spread-spectrum signaling approach in which data is associated with code sequences. The receiver uses the corresponding code to identify the intended signal. Spreading a signal across a wider bandwidth can help distinguish it from noise and interference, while code selection can support multiple users sharing the communication environment.

The team implemented transmitter and receiver prototypes using Gold and Kasami codes and evaluated the system through analysis, simulation and experimental testing. The report describes a prototype transmitter current consumption of approximately 3–5 mA, compared with roughly 20–30 mA for the state-of-the-art systems used in its comparison. It also reports a receiver sensitivity of -144 dBm for the CPSK approach, against -95 dBm for the cited comparison, and a free-space range comparison of about 0.68 mile versus 0.5 mile. These are project-reported figures, not guarantees for every installation; building materials, interference, antenna placement and network design can affect field performance.

The proposed low-power operation is relevant to energy harvesting. The report describes using indoor-light solar cells to recharge a battery, with the goal of reducing or avoiding periodic battery replacement. Realizing that outcome in a deployment depends on the energy available at the installation site, the node’s sensing and transmission schedule, and the complete system’s power requirements.

Deployment implications for integrators and operators

For system integrators and plant or facility teams, the work highlights several design questions to resolve before a sensor network is specified:

  • Measurement needs: Identify which variables—such as temperature, humidity, occupancy or air quality—will support a defined control or operational decision.
  • Placement: Select locations that provide useful observations, rather than assuming existing thermostat or wiring locations are adequate.
  • Communications: Assess building coverage, interference, antenna options and how devices will share the wireless channel.
  • Integration: Determine how sensor readings will reach the building management or control system and how they will be used.
  • Power and upkeep: Evaluate whether energy harvesting is practical at each location and account for configuration and maintenance requirements.

The research included prototype manufacturing and building-related deployment testing, including measurements in office and refrigerated environments. Such tests are important because link quality and sensor behavior need to be understood in the intended setting, not inferred from a free-space result alone.

From prototype platform to practical building controls

The platform’s significance lies in connecting three engineering aims: flexible printed sensors, low-power wireless communication and manufacturing methods suited to lower-cost production. Together, these elements could make denser environmental monitoring more practical, particularly in retrofit settings where wiring and device maintenance are barriers.

For decision-makers, the practical takeaway is to treat sensing as part of a complete control strategy. Define the operational decisions the data should support, validate radio coverage and sensor placement, and confirm how the network will integrate with existing controls. CPSK and printable materials offer a promising direction for reducing power and manufacturing constraints, but deployment economics and performance still depend on application-specific testing and system integration.

Access Official Technical PDF

About The Author