Access Official Technical PDF

Share Summary:LinkedInEmail

Maine greenhouse gas emissions reflect a mix of energy demand, fuel choices and activity across industry, buildings, power generation and transportation. The state’s 2018 biennial assessment, using data through 2015, found that gross emissions were 11.7% below 1990 levels. For industrial operators and energy decision-makers, the report offers a useful view of how changes in fuel mix and energy use can affect an overall emissions profile—and why progress in one sector does not remove the need to address persistent sources elsewhere.

Maine greenhouse gas emissions: the overall trend

Maine’s estimated gross emissions rose from 21.65 million metric tons of carbon dioxide equivalent (MMTCO2e) in 1990 to a peak of 26.97 MMTCO2e in 2002. They then declined, reaching 18.21 MMTCO2e in 2012, before edging upward to 19.12 MMTCO2e by 2015. Despite that recent increase, emissions in 2015 remained below the state’s 1990 baseline.

The assessment attributed most emissions to energy consumption: 90% of the 2015 total. Industrial processes, agriculture and waste made up the remainder. This distinction matters when setting priorities. Energy-related emissions are influenced by the fuels used to generate power, heat facilities and move people and goods, while industrial-process emissions can arise from activities that are separate from fuel combustion.

The inventory used the U.S. Environmental Protection Agency’s State Inventory Tool, supplemented with Maine program data. It covered carbon dioxide, methane, nitrous oxide and several fluorinated gases, reporting emissions in carbon dioxide equivalents. The findings describe conditions through 2015; they should not be read as a current emissions inventory.

Energy consumption and fuel switching

Total energy consumption in Maine was 13% lower in 2015 than in 1990. Petroleum remained a major part of the energy mix, accounting for half of energy consumed and 82% of carbon dioxide emissions from fossil fuel combustion in 2015. At the same time, the report associated declining emissions with lower-carbon fuels and improved efficiency.

Fuel switching was particularly visible in electricity generation. Carbon dioxide emissions from electric power generators fell 73% from their 2002 peak by 2015. The report linked this change largely to the replacement of some coal- and petroleum-powered generation with natural gas and biomass. Natural gas accounted for 62% of the sector’s fossil-fuel combustion emissions in 2015, while renewable resources—including biomass, hydropower and wind—provided 62% of the energy consumed by those facilities.

These figures illustrate why energy and emissions measures should be considered together. A change in fuel can alter the emissions associated with each unit of energy, while efficiency improvements can reduce the amount of energy required. The report found that Maine produced 21% less greenhouse gas per billion Btu of energy in 2015 than in 2002.

Sector differences shape reduction priorities

Industry, commercial buildings and power

In 2015, fossil-fuel combustion in the industrial sector produced 1.66 MMTCO2, or 10% of the state’s total carbon dioxide emissions. Natural gas supplied more than twice as much energy to the sector as petroleum, and renewable resources accounted for 46% of its energy consumption. The report also noted that lower petroleum use and increased natural gas use contributed to changes in industrial emissions, while reduced industrial activity was another possible factor in the decline in petroleum-related emissions.

Commercial-sector combustion emissions were also 10% of the statewide total. Between 1990 and 2015, commercial carbon dioxide emissions fell 21%; natural gas use increased substantially while petroleum use declined. These patterns show why facility-level energy reviews should account for both the quantity of energy used and the fuel supplying it. The report identified energy efficiency in industrial and commercial sectors as an area for continued attention.

Residential heating and transportation

Residential emissions were strongly tied to petroleum-based heating fuels: petroleum accounted for 95% of residential fossil-fuel combustion emissions in 2015. Emissions from residential petroleum use had fallen 42% from their 2004 peak by 2015. The assessment discussed higher heating-oil prices, energy-efficiency improvements, more efficient heating equipment and wood-pellet use as factors associated with changes in heating choices.

Transportation was the largest emissions source among the sectors examined. It produced 8.82 MMTCO2 in 2015, representing 53% of the state’s total carbon dioxide emissions from fossil-fuel combustion. Petroleum accounted for 99% of transportation-sector energy and related emissions. The sector used 10% more energy in 2015 than in 1990, while its carbon dioxide emissions increased 6%. The report attributed the difference in part to increased ethanol use, which the inventory treated as a renewable resource.

Why emissions intensity matters

Maine’s real gross domestic product increased from $37 billion in 1990 to $51 billion in 2015, while energy consumption declined over the same period. Emissions per million dollars of GDP were 36% lower in 2015 than in 1990. This measure, known as emissions intensity, provides context for comparing emissions with economic activity; it does not mean total emissions are eliminated or that every facility experienced the same change.

For plant managers and operations teams, the practical lesson is to track both total energy use and emissions intensity. Reviewing fuel consumption, process energy demand and equipment efficiency can help identify where operational improvements may contribute to lower emissions. The state report also pointed to grid efficiency, life-cycle considerations in materials handling and manufacturing, and replacing older, less efficient combustion equipment as potential areas for action.

Conclusion

Maine’s assessment through 2015 showed emissions below 1990 levels, alongside a clear shift in the sources and sectors shaping the total. Lower emissions from power generation and reduced energy use helped offset growth in transportation demand, which remained the largest combustion source. For industrial and commercial decision-makers, the findings underscore the value of measuring energy by fuel and end use, improving efficiency, and evaluating fuel choices in the context of operational requirements. Continued progress depends on addressing sector-specific sources rather than relying on statewide totals alone.

Access Official Technical PDF

About The Author