Access Official Technical PDF

Share Summary:LinkedInEmail

Semiconductor devices can be vulnerable to overvoltages, including short voltage pulses that disrupt operation or cause damage. Metal oxide varistors (MOVs) are voltage-dependent resistors used to limit these transients. Connected in parallel with the circuit or equipment being protected, a varistor changes from a high-resistance state during normal operation to a much lower resistance as voltage rises, diverting surge current through a shunt path.

For automation engineers and system integrators, selecting an MOV is not simply a matter of choosing a voltage rating. Its current-voltage behavior, pulse conditions, temperature, physical construction, and installation all affect how it performs as part of an overvoltage protection strategy.

How metal oxide varistors suppress transients

A metal oxide varistor has a symmetrical voltage-current (V/I) characteristic: its resistance decreases as the voltage across it increases, regardless of polarity. In the normal operating range, the device is highly resistive. When a transient raises the voltage, its resistance falls sharply and the varistor conducts, limiting further voltage rise at the protected circuit.

The steepness of this transition is described by the nonlinearity exponent, often represented by α. A higher exponent indicates a sharper change in current for a change in voltage over the varistor’s main operating region. The V/I curve is commonly plotted on logarithmic axes, where this region appears approximately as a straight line. At very low and very high currents, however, the curve departs from that simplified behavior.

Why construction affects electrical performance

MOV ceramics are made by sintering zinc oxide with other metal oxide additives. The zinc oxide grains are relatively conductive, while the boundaries between grains are highly resistive. The interfaces between grains form many small nonlinear conduction regions, often described as microvaristors. Their series and parallel arrangement helps explain how the component responds electrically.

  • Ceramic thickness affects the number of microvaristors in series and therefore the protection voltage.
  • Electrode area affects the number of parallel current paths and the current-handling capability.
  • Component volume influences energy absorption because the ceramic contains more zinc oxide grains that can absorb energy.

These relationships are useful when comparing device sizes, but they do not replace checking the ratings for the specific part. Ceramic formulation and grain size also matter. The source technical information notes that lower-voltage ceramic types may not support the same current density as higher-voltage types, contributing to differences in surge ratings and physical dimensions.

Understand the key MOV ratings

Operating voltage and leakage current

Product specifications state maximum AC and DC operating voltages. These limits describe the voltage the varistor is intended to withstand continuously; they should not be exceeded except by transients. At the specified operating voltage, the device remains highly resistive, although leakage current increases with temperature, particularly at low current levels. Check the relevant product data for the permitted voltage and leakage behavior.

Varistor voltage and clamping voltage

Varistor voltage is conventionally measured as the voltage across the device when a current of 1 mA is applied. It is a reference value, not the voltage the varistor will necessarily hold during a surge. The protection level, also called clamping voltage in product specifications, is the voltage across the varistor at a specified surge current. It varies with current, and the V/I tolerance band matters: under surge conditions, designers need to consider the upper voltage limit to assess worst-case stress on protected components.

Surge current and energy absorption

Maximum non-repetitive surge current is commonly specified for an 8/20 µs waveform. This is a defined test condition, not a guarantee that the same current can be applied repeatedly or with a different pulse shape. Energy absorption depends on the voltage across the varistor during current flow as well as the current and pulse duration. Product ratings and derating curves must therefore be matched to the expected transient waveform and repetition pattern.

Repeated pulses, longer-duration pulses, and elevated operating temperatures can require reductions in permissible surge current and energy absorption. The appropriate limits depend on the device series and application conditions; use the manufacturer’s derating information rather than treating a single-pulse maximum as a continuous or repetitive rating.

Installation and protection design considerations

Although the varistor ceramic responds rapidly, connection inductance can increase the effective response time and add voltage during a fast surge. Keep the connection path short and design the layout for low inductance, especially where steep surge-current edges are expected. A device’s stated response time alone does not describe the complete installed protection path.

Varistors can be overloaded by transients or sustained abnormal conditions. Moderate overload may cause an irreversible change in electrical properties; severe overload can puncture the element, overheat it, or in extreme cases cause rupture and expulsion of hot material. Consider physical shielding from adjacent components as part of the design.

A fuse may help interrupt follow-on current if a damaged varistor remains connected to a power source, but standard fuses generally cannot quench the surge current itself. Where application conditions differ from standard line impedances, a thermally coupled fuse or a varistor type with an integrated thermal protection approach may be relevant. Component selection and coordination should follow the applicable product documentation and system requirements.

Also check environmental and mechanical constraints. The source technical information specifies indoor use and advises preventing exposure to conditions such as condensation, corrosive gases, and saline spray. Potting, sealing, or adhesive materials can affect ceramic electrical characteristics, so compatibility should be confirmed before use.

Make protection a system-level decision

Metal oxide varistors can provide a compact shunt path for transient suppression, but effective protection depends on more than nominal voltage. Engineers should verify continuous operating voltage, clamping behavior across the relevant current range, surge waveform and repetition, energy limits, temperature derating, and installation inductance. They should also account for overload consequences, physical protection, and any follow-on current path.

In practice, the right MOV is the one whose specified limits fit the actual electrical and environmental conditions of the equipment. Reviewing the full V/I characteristics and device-specific ratings—and designing the surrounding circuit accordingly—helps make varistor protection a considered part of industrial system reliability rather than a standalone component choice.

Access Official Technical PDF

About The Author