Microoptics applications span several technologies relevant to industrial automation, from compact imaging and optical sensing to silicon photonics and laser systems. The 2019 Microoptics Conference (MOC2019) brought these fields together in a program that included research presentations on measurement, communications, imaging and novel optical devices. The program is not evidence of commercial readiness or deployment, but it does provide a useful snapshot of areas that automation engineers and technical decision-makers may want to follow.
For system integrators and plant teams, the central question is how optical components and methods might support a specific task: detecting a feature, measuring a process variable, inspecting a product or moving data. The conference topics point to several approaches, while also highlighting the need to assess each technology against the requirements of an actual application.
Microoptics applications in sensing and measurement
Sensing was a prominent theme at MOC2019. A special symposium, “Sensing by Light,” included talks on LiDAR, VCSEL-based 3D face recognition, biophotonic imaging and sensing, and the use of light to detect neutrinos and gravitational waves. The technical program also included work on microoptics for sensing, such as Brillouin-based distributed fiber sensing, miniature spectrometer arrays and perforated microring resonators for sensing.
These subjects illustrate the range of optical measurement approaches under development. Some use light to gather spatial information, as in LiDAR and 3D sensing. Others examine how light interacts with a material or travels through a fiber. For industrial applications, the relevant distinction is the measurement objective: surface or shape inspection, distributed monitoring along a route, or detection of a change in an optical signal.
The program listed a poster on a low-cost interrogation method for strain monitoring in bridge beams, as well as research on fiber-optic refractive-index sensors for multipoint measurement. These examples are not factory case studies, but they show how sensing research can address different measurement settings. Engineers evaluating a comparable approach would need to consider the target variable, sensing location, required coverage and how the optical measurement would connect to the control or data system.
Imaging and inspection with compact optics
MOC2019’s imaging sessions covered technologies ranging from cellular-resolution optical coherence tomography for skin-cancer detection to thin multi-aperture microscopes, glass 3D printing for miniature endoscopic systems and snapshot-type spectrometers using photonic-crystal filter arrays. Other presentations addressed compact 3D measurement, structured-light sensing and time-of-flight imaging using VCSEL beam scanners.
For automation teams, the broader relevance is the ongoing effort to combine optical functions in smaller or integrated arrangements. A compact instrument may be attractive where space is constrained or where a measurement must be made close to a target. However, a research topic alone does not establish suitability for a production line. Practical assessment still depends on the inspection task, the object and environment, the required measurement output, and integration with machine vision or control equipment.
Multispectral imaging and spectrometry also appeared in the program. These approaches can capture information across multiple wavelength bands rather than relying on a single broadband image. The program included compact multispectral imagers and a CCD spectrometer using a photonic-crystal wavelength-filter array. For engineers, these topics are worth tracking when ordinary image contrast may not provide the information an inspection process needs, although the source program does not specify industrial performance or readiness.
Silicon photonics and optical communications
Silicon photonics formed a dedicated technical session. Presentations addressed grating couplers, optical path conversion, arrayed waveguide gratings, heterogeneous integration through micro-transfer printing, and silicon photonic waveguides for optical modulators. Elsewhere, talks covered optical communications, lithium-niobate nanophotonics and high-speed VCSELs for short-reach links within cloud and high-performance computing systems.
These topics concern ways to guide, manipulate or modulate light in integrated devices. In automation, their potential relevance is tied to communication and instrumentation needs, but the conference program does not claim specific factory-network applications. It is more accurate to view silicon photonics as an active research and engineering area whose developments may inform future optical components and systems.
The program also included work on wavelength switching, optical filters and fiber interconnections. Together, these subjects show that optical communication is not just a question of transmitting light: coupling, filtering, modulation and integration all matter. System designers following photonic technologies should pay attention to how those functions are packaged and connected, as well as to the application requirements they are intended to meet.
Lasers and optical power transfer
Laser research at the conference ranged from photonic-crystal lasers and topological-insulator lasers to high-speed VCSELs and quantum-dot devices. Several presentations addressed VCSEL beam scanning, while other work considered optical wireless power transmission, including beam direction control and systems intended for compact Internet of Things applications.
These are distinct research directions rather than a single solution category. Lasers may serve as sources for sensing, communications or imaging, while optical wireless power transmission concerns delivering energy using light. For plant decision-makers, the useful takeaway is to identify which function a proposed optical technology performs before comparing it with established electrical, radio-frequency or machine-vision approaches.
What automation teams can take from the program
MOC2019’s agenda offers a map of microoptics topics, not a set of deployment recommendations. Engineers considering optical technologies can use it to shape evaluation questions:
- Define the measurement task: Identify whether the need is imaging, distance measurement, strain monitoring, spectroscopy or another function.
- Check the system boundary: Consider the light source, optical path, sensor, signal processing and connection to existing automation systems as a whole.
- Separate research from readiness: A conference presentation describes a technical contribution; it does not, by itself, establish industrial qualification or suitability for a specific environment.
- Track integration: Topics such as silicon photonics, compact spectrometers and integrated optical devices make packaging and system interfaces important areas to watch.
Conclusion
The MOC2019 program brought together microoptics research in sensing, imaging, silicon photonics, communications and lasers. For industrial automation professionals, its practical value lies in understanding the breadth of optical approaches being explored and matching future developments to clearly defined measurement or communication needs. Careful evaluation of the complete system—not just an individual optical component—remains essential when considering how microoptics may fit into an automation application.