Access Official Technical PDF

Share Summary:LinkedInEmail

Minnesota renewable energy generation changed substantially between 2007 and 2017. Renewables supplied 24.9% of electricity generated within the state in 2017, compared with 8.4% a decade earlier. Wind was the largest renewable source, while solar capacity and generation were growing quickly. For utility planners, plant operators, and energy decision-makers, the shift highlights how resource plans, policy requirements, project development, and transmission infrastructure can reshape an electricity portfolio over time.

The figures and development plans discussed here reflect the status reported in November 2018. Generation shares describe electricity produced within Minnesota; they are not a direct measure of the renewable content of all electricity sold to customers, since the state also imports power.

Minnesota renewable energy: a changing generation mix

In 2017, renewables became Minnesota’s second-largest source of in-state electricity generation, surpassing nuclear power. Coal remained the largest single source, but its share fell from 59% in 2007 to 39% in 2017. Over the same period, renewable generation rose from 8.4% to 24.9%, and natural gas increased from 7% to 12%.

Wind drove most of the renewable growth. It supplied 18.2% of Minnesota’s electricity in 2017, up from about 5% in 2007. Solar contributed 1.2% that year, while biomass supplied 3.4% and hydroelectricity 2.1%. These percentages measure energy generated over time, not the maximum output a generator can provide.

Capacity and generation are different measures

Capacity, commonly expressed in megawatts (MW), describes a generator’s maximum power output under specified conditions. Generation, measured in megawatt-hours (MWh), records how much electricity it produces over a period. A plant’s installed capacity therefore does not, by itself, indicate its contribution to total annual electricity supply.

That distinction is useful when comparing Minnesota’s renewable resources. The state reported 3,509 MW of wind capacity and 596 MWAC of solar photovoltaic capacity in 2017; the solar figure was also reported as 714 MWDC. Solar panels produce direct current, while the electricity grid uses alternating current. Inverters convert solar output from DC to AC for grid use. AC and DC capacity figures should not be treated as interchangeable without attention to the measurement basis.

Wind power leads renewable growth

Minnesota had about 3,709 MW of installed wind capacity at the end of 2017, including large and small turbines. Wind’s share of generation had grown for two decades, and more projects were in development. As of the 2018 update, more than 1,300 MW of new wind generation was under construction or in development within the state, with additional projects planned for the broader Minnesota market.

The pipeline included projects at different stages. Red Pine Wind, a 200 MW project in Lincoln County, entered commercial operation in February 2018. Other approved projects included Blazing Star I, Freeborn Wind, Palmer’s Creek, and Stoneray. Their planned capacities, locations, development status, and power-sale arrangements varied. For system planners, these projects represented prospective additions rather than a single block of immediately available generation.

The update also identified transmission as part of the development picture. Completion of the CapX 2020 transmission project was supporting proposals for additional wind development. Connecting new generation to the grid is an important consideration when utilities assess resource options and future system needs.

Solar and community solar expand

Solar’s contribution to total in-state generation was still modest in 2017, but installed capacity was increasing rapidly. Minnesota added 395 MWAC of solar capacity during 2017, compared with 169 MWAC in 2016, bringing known grid-tied photovoltaic capacity to more than 596 MWAC. The expansion included utility-scale projects as well as smaller customer-sited systems.

Community solar was a notable part of the market. These programs use centrally located solar installations to serve subscribers such as households, businesses, nonprofits, educational institutions, and public entities. At the end of 2017, Xcel Energy reported 246 MWAC of community solar across 66 project sites. Smaller totals were reported in other utility territories. The model gives participating customers a way to subscribe to output from a shared solar installation rather than relying solely on a system at their own premises.

Minnesota’s Solar Energy Standard called for investor-owned utilities to generate 1.5% of their electricity from solar by the end of 2020. In 2017, utility plans included further solar additions, while community solar projects were contributing to the state’s expanding installed base. Standards, tax credits, and other incentives were among the factors shaping project development described in the update.

Utility resource plans guide the transition

Integrated resource plans (IRPs) set out how utilities expect to meet future electricity needs, weighing proposed generation resources and retirements. In Minnesota, utility plans often included renewable additions beyond the state’s Renewable Electricity Standard, which set a 25% renewable target by 2025. The standard relates to retail electricity sales, so it should not be confused with the share of electricity generated within state borders.

Plans reported in 2018 differed by utility. Xcel Energy’s approved resource plan included wind and solar additions, along with scheduled retirements of two Sherburne County Generating Station coal units. Great River Energy’s plan included new wind, the retirement of Stanton Station, and a longer-term goal of increasing its renewable energy supply. Minnesota Power proposed additional wind and solar while planning to retire coal-fired capacity at Boswell Energy Center. Otter Tail Power’s approved plan included wind and solar additions and the planned retirement of Hoot Lake.

These plans illustrate why energy portfolios should be assessed across more than one metric. Nameplate capacity, expected generation, fuel costs, emissions objectives, purchase agreements, and retirement schedules all affect planning decisions. The source update also noted that temporary factors, including plant outages, fuel prices, and weather-related market conditions, can influence annual generation shares. A single year’s mix should therefore be read in the context of longer-term trends and planned system changes.

Practical implications for energy decision-makers

Minnesota’s 2007–2017 shift shows how renewable generation can grow while the relative contribution of other sources changes. For industrial energy users and technical decision-makers, the practical takeaway is to distinguish installed capacity from delivered energy, in-state generation from electricity sales, and approved plans from projects already operating. Those distinctions support clearer evaluation of utility resource plans, grid developments, and renewable procurement options.

As of November 2018, wind remained the leading renewable source, solar was expanding from a smaller base, and utilities had outlined further additions alongside generation retirements. The pace and final shape of that transition depended on project completion, utility decisions, and system planning. Understanding those factors provides a sound basis for interpreting Minnesota’s renewable energy progress and its implications for the electricity supply.

Access Official Technical PDF

About The Author