Millimeter-wave (mmWave) communications are a way to access broad swaths of radio spectrum for high-capacity wireless networks. For industrial automation, that makes mmWave relevant to the connectivity layer behind mobile devices, wireless access and other data-intensive applications. Its potential comes with important design trade-offs: high-frequency signals are vulnerable to path loss and blockage, while dense deployments and shared spectrum make interference management essential. Network planners must consider access methods, antenna design, coverage and security together.
Why mmWave communications matter
The mmWave band is generally described as 30 to 300 GHz, with wavelengths of roughly 1 to 10 millimeters. Its available bandwidth can support high data rates and improve spectral efficiency, helping address demand that cannot be met by relying on crowded lower-frequency spectrum alone. Multiple-input multiple-output (MIMO) antenna systems can serve multiple users and make better use of network resources.
However, the spectrum’s advantages do not eliminate the constraints of radio propagation. mmWave signals can experience substantial path loss and may be attenuated or blocked by obstacles such as buildings, people and vehicles. Rain can also contribute to attenuation. As a result, providing coverage is not simply a matter of using more bandwidth: network architecture and directional transmission are central to making the link usable.
OMA and NOMA: Different ways to share resources
Orthogonal multiple access (OMA) and non-orthogonal multiple access (NOMA) provide different approaches to serving users over shared network resources. In OMA, users are separated through orthogonal resources, such as distinct time or frequency allocations. The approach is familiar from systems including LTE, but the source paper notes that OMA does not dynamically vary transmit power among users according to their conditions in the way NOMA can.
NOMA allows users to share a resource while receiving different power levels. For example, a cell-edge user farther from a base station may be assigned more power than a cell-centric user nearby. This can help accommodate users with different link conditions, but it requires more receiver-side processing. Successive interference cancellation (SIC) is used to separate signals, and the added complexity is a key consideration when evaluating NOMA.
Neither method is universally preferable. OMA can be attractive where a less complex receiver is important; NOMA offers flexible power allocation but adds decoding demands. In mmWave systems, either approach must be assessed alongside antenna configuration, user distribution and interference conditions. Combining mmWave, massive MIMO and access techniques can help address capacity and interference, but system performance depends on the specific design.
Beamforming and small cells address coverage limits
Because mmWave links are susceptible to path loss and obstruction, systems commonly rely on directional antennas rather than transmitting equally in every direction. Beamforming concentrates radio energy toward an intended receiver, helping improve the signal at that location and limiting exposure to unwanted directions. Massive MIMO uses many antennas, while hybrid beamforming combines analog and digital processing approaches.
Hybrid beamforming is appealing for mmWave networks because it can support directional transmission and high spectral efficiency. Its implementation, however, brings computational complexity and cost considerations. Antenna and radio-frequency design must therefore be considered as part of the network architecture, not as an isolated component.
Small cells provide another tool for addressing coverage and capacity. Deploying small-cell base stations indoors and outdoors can bring access points closer to users, including in hotspot areas. A heterogeneous network can combine mmWave with sub-6-GHz links: the lower-frequency layer can provide longer-distance coverage, while mmWave can contribute high data rates where the signal is available. This approach still requires careful placement and management because obstacles can disrupt mmWave links.
Security at the physical layer
Wireless networks carrying personal or confidential information must address eavesdropping as well as performance. Conventional cryptography protects data through encryption, but physical layer security (PLS) focuses on the wireless transmission itself. The aim is to reduce the quality of the signal available to an eavesdropper while maintaining communication with the intended receiver.
Multiple antennas and beamforming can support PLS strategies. The challenge is that a base station may not know an eavesdropper’s instantaneous channel state information. This uncertainty makes secure transmission a design problem involving antenna configuration, channel knowledge and operating conditions. PLS should be viewed as a complement to, not a replacement for, broader security measures.
Design questions for network planners
Successful mmWave deployment requires balancing benefits against practical constraints. Engineers and decision-makers should account for:
- Coverage and blockage: Determine where obstacles and propagation loss may interrupt links, and whether small cells or complementary lower-frequency coverage are needed.
- Interference: Coordinate directional beams, users and cells to manage interference within and between network areas.
- Access and receiver complexity: Compare OMA and NOMA in light of user conditions, power allocation needs and the processing burden of SIC.
- Hardware and implementation: Evaluate antenna arrays, RF components, hybrid beamforming complexity and device integration constraints.
- Security: Consider physical layer techniques alongside the uncertainty in channel information and the network’s wider security requirements.
Further research areas include reliable beam tracking in mobile settings, interference mitigation in mmWave-NOMA, device integration, and solutions to physical constraints such as area, thermal limits and battery life. These are important considerations when moving from a promising radio technology to a dependable network design.
Conclusion
mmWave communications offer a route to high-capacity wireless links by using broad available bandwidth, but performance depends on more than spectrum. OMA and NOMA present different trade-offs in resource sharing and receiver complexity; beamforming and massive MIMO help focus transmissions; and small cells and heterogeneous networks can help address coverage limitations. For industrial and other demanding environments, the practical priority is to design these elements together, accounting for blockage, interference, implementation complexity and security from the outset.