Tracking municipal greenhouse gas emissions requires more than comparing annual totals. Inventory boundaries, source data and calculation methods all affect whether year-to-year changes reflect real progress or revised accounting. San Diego’s 2018 Climate Action Plan (CAP) annual report illustrates this challenge: its updated inventory put 2017 emissions at about 10.2 million metric tons of carbon dioxide equivalent (MMT CO2e), approximately level with revised 2016 emissions.
The report covers the first phase of CAP implementation, from January 2016 through December 2017. Its findings offer a practical view of how local governments can monitor emissions across buildings, energy supply, transportation, water, waste and municipal operations—while making the limits of the data clear.
What the 2017 greenhouse gas inventory shows
The inventory includes five categories: on-road transportation, electricity, natural gas, water, and wastewater and solid waste. Transportation was the largest source, at 5.525 million MT CO2e in 2017. Electricity accounted for 2.187 million MT CO2e, natural gas for 2.095 million, wastewater and solid waste for 285,000, and water for 67,000. The rounded category values sum to slightly less than the reported total because the figures are rounded.
Compared with revised 2016 estimates, total emissions fell by about 0.2%. Changes varied by category: water-related emissions declined 8%, transportation and electricity each decreased by less than 1%, while natural gas and waste-related emissions increased by 2% and 3%, respectively. These differences show why a single citywide number can obscure important changes within individual systems.
The inventory is not a complete accounting of every emission source in the city. It excludes, among other categories, air travel, shipping, off-road vehicles and equipment, and certain high-global-warming-potential gases. Its per-capita and economic-intensity measures therefore apply only to the categories included and should not be compared directly with broader inventories that use different boundaries.
Why consistent methods matter for municipal greenhouse gas emissions
San Diego revised its 2015 and 2016 estimates using updated data and methods so those years could be compared with 2017 on a consistent basis. The revisions affected transportation, energy and water. For example, energy data were requested using utility town codes to define the city boundary, rather than requiring both a town code and a service address within the city. The report explains that postal service city labels do not necessarily align with jurisdictional boundaries.
This kind of refinement is important for anyone responsible for emissions reporting. When a boundary or data source changes, historical values may need recalculation. Otherwise, apparent progress or deterioration may reflect a change in the measurement process rather than a change in energy use or operational performance. Maintaining a consistent time series supports more meaningful comparisons and helps decision-makers interpret the results responsibly.
Energy and water: separate trends beneath the total
Grid-supplied electricity use declined from 2010 to 2017, while the report’s revised 2016-to-2017 figures show a further decrease of about 1%. Natural gas use moved in the opposite direction, rising about 2% between revised 2016 and 2017. The report also identifies different patterns in municipal operations: total energy use from utility purchases increased 3% in 2017 compared with revised 2016.
Several operational factors were associated with the municipal electricity increase, including new or newly operational facilities, a change in pumping equipment, reservoir maintenance and facility-level operating decisions. The report presents these as likely contributors, not as a single definitive cause. This is a useful distinction for facility and operations teams: consumption data can identify where to investigate, while site-level context helps explain changes.
Water use per capita fell substantially from the 2010 baseline and remained at a similar level from 2015 through 2017. The report also notes that local water supply rose from 4% of the water mix in 2015 to 19% in 2017. A greater local share may reduce imported water and the energy and emissions associated with that supply. Water conservation and supply planning therefore intersect with energy and emissions management.
Renewable energy, fleets and transportation
San Diego’s report tracks several components of its clean-energy strategy. The renewable share of SDG&E’s electricity supply increased from 11% in 2010 to 44.3% in 2017. Behind-the-meter photovoltaic capacity also expanded: the report estimates 272 megawatts of interconnected systems by the end of 2017. These figures describe different parts of the electricity picture, so they should not be treated as interchangeable measures of renewable supply.
Municipal fleet measures included the transition to renewable diesel and the use of compressed natural gas waste collection trucks. The report estimates that switching from B5 biodiesel to renewable diesel avoided approximately 16,000 MT CO2e in 2017 under its accounting method. It also reports that 24 CNG waste collection trucks displaced the equivalent of 275,842 gallons of diesel in 2017. These are fleet-specific indicators; they do not replace the need to track fuel consumption and emissions across the wider transportation system.
On-road transportation remained the largest inventoried source. The city’s reported 2017 estimate was based on 13.012 billion vehicle miles traveled and a regional average vehicle emissions rate of 425 grams CO2e per mile. The CAP strategy focuses on reducing commuter driving by supporting transit, walking and bicycling, particularly in Transit Priority Areas. The report also describes updates to transportation modeling and modeshare analysis, underscoring that changes in analytical tools can affect how progress is measured.
Practical implications for climate planning
San Diego’s 2017 results point to several practical priorities: preserve consistent inventory methods, report category-level trends alongside totals, and pair utility or fleet data with operational context. They also show why progress in one area should not be assumed to offset movement in another. Water emissions declined, for example, while natural gas and waste emissions rose.
For municipal leaders and technical teams, the central lesson is to treat an emissions inventory as both an accounting system and a management tool. Clear boundaries and transparent revisions make comparisons more reliable; detailed sector data help direct follow-up; and careful interpretation prevents estimates from being mistaken for direct measurements of every source. Applied consistently, that approach can make climate strategy monitoring more useful for setting priorities and assessing implementation over time.