Nanotechnology in industrial applications is not simply a matter of making materials smaller. It involves engineering structures at the nanoscale to change how materials filter, store energy, interact with light or support chemical reactions. European research projects funded under the FP6 and FP7 programmes explored how these properties might address industrial challenges in energy, manufacturing and environmental management.
For automation engineers, system integrators and plant leaders, the practical lesson is that a nanoscale material only becomes useful when it can be incorporated into a reliable process. That means considering the equipment, operating conditions, monitoring requirements and safety questions alongside the material itself.
Nanotechnology in industrial applications: from material to process
Nanomaterials can have properties that differ from those of the same material in bulk form. A shorter diffusion path, for example, can affect how quickly a material responds or transfers energy. A highly structured surface can influence adhesion, light absorption or contact with a fluid. These characteristics may help improve a process, but they do not by themselves demonstrate that a technology is ready for routine industrial deployment.
Several European projects therefore addressed the process around the material: how to manufacture it, integrate it into equipment, test it under relevant conditions and assess its performance over time. This systems approach is especially important in industrial environments, where heat, pressure, contaminants and continuous operation can challenge materials that perform well in laboratory tests.
Energy applications: storage, solar conversion and carbon capture
Energy research examined nanostructured electrodes and electrolytes for rechargeable lithium batteries. The ALISTORE network investigated nanopowders and nanocomposites as alternatives to bulk materials, with the aim of addressing limitations in power, energy storage and battery lifespan. The project rationale included applications such as electric and hybrid vehicles, renewable-energy systems and uninterruptible power supplies. These were research objectives, not a guarantee of commercial outcomes.
Other projects investigated nanoscale structures for solar cells. Work on titanium oxide nanotubes explored photoactive materials and their potential use in dye-sensitised solar cells and photocatalytic processes. Research into nanostructured surfaces also considered how surface design could improve light management in photovoltaic devices. Turning such concepts into production equipment requires repeatable fabrication methods and validation at a relevant scale.
Carbon capture was another area of interest. The NANOGLOWA project developed nanostructured membrane materials intended to separate carbon dioxide from power-plant flue gases. Its work included membrane development and the design of modules for testing in demanding conditions, including elevated temperatures and fly ash. This illustrates a key engineering consideration: separation performance must be evaluated alongside durability and integration with the gas-handling process.
Water treatment and industrial wastewater
Industrial water treatment projects explored nanostructured catalysts and membranes for removing contaminants or recovering useful substances from wastewater. MONACAT, for example, developed catalysts attached to structured reactors, including ceramic and metallic supports. The water flows through the reactor, where catalytic processes are designed to treat pollutants. Fixing catalyst materials to a larger structure is relevant to process design because it can help avoid handling loose particles while allowing the reactor to be tested and modelled as a system.
Other approaches focused on selective filtration. MEMBAQ investigated membranes containing aquaporins, proteins that transport water in living cells, while WATERMIM studied molecularly imprinted polymers designed to recognise selected pollutants. These projects sought ways to improve separation or detection for substances such as pesticides and pharmaceutical compounds. Their work points to a broader opportunity: tailoring a material to a specific treatment task rather than relying only on non-selective removal methods.
NEW ED examined bipolar membrane electrodialysis to recover acids and bases from saline industrial wastewater. Instead of treating a salt-containing stream only as waste, the process aims to split the salt into potentially useful components. For plant teams, this type of approach raises practical questions about membrane manufacture, energy use, module design and fit with existing production flows.
Manufacturing integration and operational considerations
Moving from a promising material to an industrial application requires more than a successful laboratory result. Project work on atmospheric-pressure plasma processing, for example, explored in-line approaches to etching and coating three-dimensional nanostructures. Potential uses included solar surfaces, biocidal surfaces, electrodes and tailored interfaces for automotive and aeronautical applications. The emphasis on manufacturing technology reflects the importance of producing structured surfaces consistently and integrating them into established production routes.
Technical decision-makers assessing nanotechnology should consider:
- Process compatibility: Can the material or component operate under the plant’s actual temperature, pressure and fluid conditions?
- Scale-up and repeatability: Can the structure be produced consistently and incorporated into an industrial module or production line?
- Performance over time: How will fouling, wear, chemical exposure or recycling affect the material and the process?
- Measurement and safety: What methods are needed to characterise the material, assess exposure and understand its environmental fate?
These questions are closely connected. A material’s behaviour during use, maintenance and end-of-life handling can affect both risk management and process performance. The European research programme described safety, environmental assessment and responsible governance as part of technology development, rather than issues to consider only after a product is designed.
Conclusion: evaluate the whole system
Nanotechnology research has explored potential routes to more selective water treatment, alternative energy-storage materials, improved solar conversion and membrane-based carbon capture. The projects also show why industrial adoption depends on more than nanoscale performance: materials must be manufacturable, compatible with equipment, testable under realistic conditions and assessed for safety throughout their lifecycle. For automation and operations teams, the most useful starting point is to evaluate the complete process—from material production to plant integration and monitoring—before judging the value of a specific nanotechnology application.