Access Official Technical PDF

Share Summary:LinkedInEmail

Nevada’s greenhouse gas inventory offers a useful planning framework for organizations assessing energy use, emissions sources, and long-term operating priorities. The state’s 2019 report documents Nevada greenhouse gas emissions from 1990 through 2016 and projects trends through 2039. For industrial operators and technical decision-makers, its central message is that emissions are shaped by several connected sectors—and that changes in electricity generation alone will not address every source.

The report is a historical assessment, not a current forecast. Its projections reflect policies and datasets available when it was prepared, and the report notes that future inventories may change as better data and methods become available. Even with that limitation, its sector-based approach helps explain how emissions accounting can inform decisions about energy, infrastructure, and operational planning.

How Nevada’s emissions inventory is structured

The Nevada Division of Environmental Protection organized the inventory into seven sectors: transportation; electricity generation; industry; residential and commercial; waste; agriculture; and land use, land use change, and forestry. The inventory counts emissions associated with activities within Nevada’s geographic boundaries, with a limited exception for certain industrial process emissions.

Emissions are reported in million metric tons of carbon dioxide equivalent (MMTCO2e). This common unit allows greenhouse gases with different warming potentials to be expressed on a comparable basis. The gases considered include carbon dioxide, methane, nitrous oxide, hydrofluorocarbons, perfluorinated compounds, and sulfur hexafluoride.

The report distinguishes gross emissions from net emissions. Gross emissions add together sources across sectors. Net emissions subtract the amount attributed to sinks, such as carbon stored by forests and other lands. In Nevada’s inventory, land use, land use change, and forestry is the only sector reported as a net sink. The report also cautions that sequestration estimates have uncertainty and can vary from year to year.

What the historical data show

Nevada’s net emissions peaked in 2005 at 49.363 MMTCO2e. By 2016, net emissions were 38.537 MMTCO2e, 22% below that peak. The report attributes much of the decline after 2005 to the economic downturn and the closure of two major coal-fired power plants, Mohave and Reid Gardner.

The balance between major sources also shifted. Electricity generation was the largest emissions sector in earlier years, but transportation overtook it in 2015. In 2016, transportation represented nearly 35% of gross emissions. Electricity generation emissions had fallen as Nevada relied more on renewable energy and lower-emitting natural gas than before. This shift illustrates why an emissions inventory needs to track multiple sectors rather than using a single energy indicator as a proxy for statewide progress.

Energy-related activity accounted for more than 86% of Nevada’s gross emissions in 2016, according to the report. This category includes transportation, electricity generation, energy-related industry, and residential and commercial energy use. The remaining share came from industrial processes, waste, and agricultural activities. For industrial organizations, that distinction matters: fuel combustion is only one part of the industrial emissions picture.

Industry: combustion, processes, and fuel systems

The inventory separates industrial emissions into three broad areas: stationary fuel combustion, industrial processes, and natural gas and oil systems. This structure highlights different sources that may require different measurement and management approaches. Facility energy use, process-related emissions, and emissions associated with fuel production or delivery are not interchangeable categories.

The report projected industry to be the most rapidly increasing emissions source under the policies and assumptions it considered. A significant factor was the projected growth in hydrofluorocarbon, perfluorocarbon, and sulfur hexafluoride emissions. These gases are used in applications that include refrigeration and air conditioning, aerosols, fire extinguishing, foam production, and semiconductor manufacturing. The report projected these emissions to increase as reliance on these substances grew.

For plant managers and system integrators, the practical implication is not that the inventory prescribes a specific facility upgrade. Rather, it shows why a useful emissions baseline should distinguish fuel consumption from process emissions and other sources. Clear boundaries and categories make it easier to understand which activities contribute to an organization’s footprint and to evaluate potential changes without confusing one source with another.

Projections and the gap to statewide goals

Under the existing policies and assumptions included in the 2019 report, Nevada’s net emissions were projected to decline 24% below 2005 levels by 2025 and 26% by 2030. The statewide goals established by Senate Bill 254 were reductions of 28% by 2025 and 45% by 2030. The report therefore estimated that additional reductions would be needed to meet both targets, with a larger gap projected for 2030.

The projections assumed, among other things, that updated renewable portfolio requirements would be met, planned coal-fired generating unit retirements would occur, and certain existing vehicle and oil and gas industry standards would remain in effect. These are assumptions, not guarantees. Changes to policy, technology, energy use, or the underlying data could alter the results.

Transportation was projected to remain the largest emissions sector through 2030. Electricity generation emissions were expected to continue decreasing, while industry emissions were projected to rise. Residential and commercial emissions were expected to remain relatively stable, and the report identified continued growth in population and vehicle travel as relevant pressures. Taken together, the projections show why reductions in one sector may be offset by increases elsewhere.

Using inventory data in industrial planning

For industrial decision-makers, the report’s value is its accounting logic and its emphasis on sector-specific data. An organization reviewing emissions can use a similar sequence:

  • Define the boundary: Identify which operations, energy uses, and emissions sources are included in the assessment.
  • Separate source types: Distinguish stationary combustion from process emissions and fuel-system emissions where relevant.
  • Document assumptions: Record the datasets, calculation methods, and operating conditions used to estimate emissions.
  • Revisit the baseline: Update estimates when more representative activity data or revised methods become available.

This approach supports more informed discussions about energy efficiency, fuel choices, and operational changes. It also helps avoid treating statewide trends as a direct measure of any single facility’s performance. The report itself relies on state and federal data, energy outlooks, utility information, and sector-specific sources, and acknowledges that estimates may differ from earlier versions as methods and information improve.

Conclusion

Nevada’s 2019 inventory shows a changing emissions profile: electricity generation declined from its earlier prominence, transportation became the largest source, and industry was projected to grow under the assumptions used. For industrial organizations, the key practical lesson is to build emissions assessments around clearly defined boundaries and distinct source categories, then update them as data improves. A sector-wide inventory cannot determine a facility’s best course of action, but it can provide context for prioritizing measurement and evaluating how industrial activity fits into broader energy and emissions goals.

Access Official Technical PDF

About The Author