Access Official Technical PDF

Share Summary:LinkedInEmail

Industrial automation systems increasingly depend on timely access to data, from operational databases to analytics and other compute-intensive applications. When storage cannot keep pace with processors, the interface between them can become a bottleneck. NVMe storage was designed to reduce that constraint by providing a modern protocol for solid-state storage, including flash-based SSDs. For automation engineers and operations leaders, understanding its architecture and deployment options can help determine where it may improve performance—and where system-level trade-offs matter.

Why storage interfaces can limit performance

Hard disk drives were designed around rotating media and remain useful where high capacity and lower storage cost are priorities. But their performance has not advanced at the same pace as processors and memory. Flash-based solid-state drives offer faster access to persistent data, yet the legacy interfaces developed for HDDs can prevent systems from making full use of that speed.

Serial ATA (SATA) and Serial Attached SCSI (SAS) evolved over time, with backward compatibility shaping their designs. Those interfaces were adequate for slower storage devices, but their command processing and limited queueing can restrict the parallel input/output (I/O) activity that flash can support. As a result, replacing an HDD with an SSD does not necessarily remove every storage bottleneck.

NVMe, or Non-Volatile Memory Express, was created for solid-state storage rather than adapted from protocols built around rotating disks. It reduces command-handling overhead and supports extensive parallelism. The goal is to move data between a processor and persistent storage with less delay, allowing applications to make better use of flash performance.

How NVMe storage reduces interface overhead

NVMe supports many I/O queues and commands within each queue. This enables multiple processor cores and application threads to issue work in parallel, rather than relying on a small number of queues to serve competing requests. NVMe queues can also be associated with processor cores, helping keep command handling aligned with multicore processing.

The protocol uses a more direct approach to communicating storage operations than legacy SCSI- and ATA-based command paths. Along with its ability to use high-speed PCI Express (PCIe) connections, this design can reduce latency and CPU overhead associated with I/O. The potential benefits include faster application response, higher I/O throughput, and more processor capacity available for other tasks. Actual results depend on the complete system and workload; NVMe does not remove every possible bottleneck.

For industrial environments, these characteristics are most relevant when an application is sensitive to storage response time or generates substantial concurrent I/O. Examples may include data-intensive analytics, large databases, and workloads that need rapid access to frequently used information. The useful question is not simply whether an application can use faster storage, but whether storage latency or throughput is limiting its performance.

Choosing an NVMe deployment model

NVMe storage can be deployed in different ways. The right approach depends on whether a workload needs storage close to a server, shared access across systems, or a combination of performance and established data services.

Local NVMe in a server

An NVMe SSD installed in a server can connect through PCIe, placing high-performance storage close to the processor. This can suit applications that benefit from low-latency access and do not need the storage device to be readily shared across multiple servers. The trade-off is that capacity is captive to that system. Once storage and the interconnect become faster, the server’s processors may themselves become the limiting factor.

NVMe over Fabrics

NVMe over Fabrics (NVMe-oF) extends NVMe access across a network fabric. Ethernet, Fibre Channel, and InfiniBand are among the fabrics described for this approach. Instead of restricting access to devices inside one server, NVMe-oF can make NVMe storage available across a broader data center environment.

This model can support flexible placement of compute and storage resources and allow multiple application servers to access shared data. However, a shared storage environment also needs appropriate data services. Availability, data protection, security, and efficient resource management remain important considerations; a fast protocol alone does not provide them.

NVMe media behind existing storage protocols

A third option is to use NVMe-based flash inside a shared storage system while continuing to present storage to applications through familiar protocols such as Fibre Channel, iSCSI, NFS, or SMB. This can improve the storage system’s internal performance without requiring every application environment to adopt a new access protocol. It is a practical distinction: NVMe can serve as the interface to the storage media even when applications continue using established ways to reach shared storage.

Assess workload fit before deployment

Before selecting an NVMe architecture, technical teams should identify where the current performance constraint sits. Review whether the workload is I/O-intensive, whether response time is affected by storage access, and whether several cores or threads need to issue storage requests concurrently. Also consider whether data must be shared across servers and what availability, protection, and management services the environment requires.

  • For a single server: weigh local performance against the need to share or centrally manage capacity.
  • For shared access: evaluate networked NVMe alongside fabric requirements and the data services the storage system must provide.
  • For established applications: consider whether an NVMe-backed shared system can improve the storage layer while preserving existing application protocols.

These decisions should be made in the context of the whole I/O path. Faster storage can expose limits elsewhere in a system, so expected benefits depend on how processors, networking, storage, and software interact.

Conclusion: match NVMe to the bottleneck

NVMe addresses a specific challenge: legacy storage interfaces can prevent flash devices from delivering their potential. Its parallel queues and streamlined command handling can lower storage-related delay and improve I/O efficiency. For industrial automation teams, the practical step is to locate the actual workload bottleneck, then choose between local NVMe, NVMe over Fabrics, or NVMe media behind existing shared-storage protocols. Aligning the deployment with data-sharing needs and required data services is as important as the interface itself.

Access Official Technical PDF

About The Author