Access Official Technical PDF

Share Summary:LinkedInEmail

The oriented attachment of nanocrystals offers a route to building larger, epitaxially connected structures from smaller crystalline particles. For process and materials engineers, the central challenge is understanding how contact develops: particles can approach one another without immediately fusing, and the size and uniformity of the eventual connection influence the structure of the assembly. In situ liquid cell transmission electron microscopy (TEM) has now revealed the neck-formation sequence between PbSe nanocrystals at atomic resolution.

The observations show that attachment is not a single event. It proceeds through particle rearrangement, a period of neck nucleation, and subsequent widening. That distinction matters when interpreting how processing conditions produce a connected nanocrystal superlattice—and when considering how its structure might be controlled.

Why neck formation matters in nanocrystal assemblies

In an epitaxially connected superlattice, neighboring nanocrystals share a crystallographic orientation and become linked through a narrow region called a neck. These links provide coherent connections between particles. Their dimensions and consistency can affect coupling across the assembly, including the potential for electrons to become more delocalized. The study identifies atomically uniform necks as a desirable structural feature for semiconductor superlattices, while showing that the pathway to forming them had not been directly resolved.

Earlier structural measurements could compare assemblies before and after attachment, but a before-and-after view cannot fully reveal what happens in the intervening stages. Liquid-phase TEM makes it possible to follow particles as they move and connect. In this work, researchers used it to observe oleate-capped PbSe nanocrystals during a transformation from a quasi-hexagonal monolayer into a quasi-square, epitaxially connected arrangement.

Three stages in the oriented attachment of nanocrystals

1. Particles approach and rearrange

Initially, the nanocrystals occupied a quasi-hexagonal arrangement, with neighboring lattice angles near 60 degrees. Over time, particles moved toward their neighbors and the angles shifted toward 90 degrees, corresponding to a change toward square symmetry. For a representative pair, the surface-to-surface gap narrowed from 4.5 nanometers until translational motion stopped at about 0.6 nanometers.

The particles did not form a neck as soon as they reached this separation. Instead, the gap remained visible for several seconds. This pause is a key part of the observed process: reaching close proximity and establishing a crystalline connection are distinct stages.

2. A neck nucleus forms through transient filaments

After the particles stopped moving, a discernible neck took roughly 5–10 seconds to appear. During initiation, the imaging captured thin PbSe filaments that formed and broke apart. Their width fluctuated before a stable nucleus emerged. The observations indicate that these early connections are dynamic rather than immediately permanent.

A stable neck formed when its width exceeded a critical size of about 0.9 nanometers. Density functional theory (DFT) calculations supported the existence of a critical nucleus: in the modeled structure, adding atoms initially increased the relative energy, while further growth made thicker necks more stable. The calculations help explain why very thin filaments can be short-lived while a sufficiently large nucleus can continue to grow.

3. The neck widens while its length stays nearly fixed

Once nucleated, the connection widened over approximately 15–20 seconds, reaching roughly 2.7–3 nanometers in width. Its length remained close to the original 0.6-nanometer gap. The researchers observed little movement of the nanocrystal centers during this stage, alongside a slight reduction in particle width perpendicular to the connection. These changes support a mechanism in which atoms from neighboring lateral facets move into the gap to build the neck.

Ligands help set the initial separation

The persistent gap before neck formation was attributed primarily to residual oleate ligands on the PbSe surfaces. The researchers proposed that these ligands, which remained after ethylene glycol (EG) treatment, could flex or become compressed between approaching particles and help hold them apart. DFT calculations using an oleic acid fragment also found a minimum in system energy over a gap range of 0.55–0.8 nanometers, consistent with the experimentally observed separation.

A comparison using ethylenediamine (EDA), a stronger ligand-removal agent, provided additional evidence. Under those conditions, the particles attached directly without the same separation stage. This comparison supports a role for oleate ligands in setting the pre-attachment distance; it does not establish that the solvent alone causes the observed gap.

What ex situ imaging confirms

Ex situ high-angle annular dark-field scanning TEM (HAADF-STEM) was used to examine larger-area assemblies after EG treatment. The resulting square superlattice had an average center-to-center spacing of 6.7 nanometers, while the average neck width was about 3.0 nanometers. Atomic-resolution images showed that most necks extended approximately two atomic layers, or 0.6 nanometers, between particles.

These measurements complement the real-time observations. In situ imaging clarifies the sequence and timing of neck formation; ex situ imaging checks whether the resulting connections are present across a larger assembly. The agreement between observed neck dimensions and the final structural measurements strengthens the proposed mechanism.

Practical implications for materials process development

Although this work concerns semiconductor nanocrystals rather than conventional factory automation, its process-level lesson is broadly relevant to materials development: final structure can depend on events that occur during a short intermediate stage. Endpoint inspection alone may not distinguish particle approach from nucleation or growth, even though those stages respond to different aspects of the system.

For researchers developing nanocrystal assembly processes, the findings highlight several variables to consider together:

  • Particle spacing: the approximately 0.6-nanometer gap preceded neck initiation in the reported PbSe system.
  • Ligand condition: residual oleate was associated with separation, while stronger ligand removal changed the attachment pathway.
  • Nucleation and growth: transient filaments preceded a stable nucleus, followed by neck widening at nearly fixed length.
  • Particle uniformity: the study notes that monodisperse starting nanocrystals are a precondition for obtaining consistent neck lengths.

These values describe the specific PbSe, ligand, and treatment conditions studied; they should not be treated as universal process setpoints for other materials or chemistries.

Conclusion

Real-time TEM shows that PbSe nanocrystal attachment involves a controlled sequence: approach to a ligand-limited gap, formation of transient atomic filaments, nucleation above a critical width, and growth into a wider neck. Combining in situ observation, ex situ structural analysis, and DFT calculations provides a clearer account of how individual particles become an epitaxially connected superlattice. For materials process development, the practical implication is to consider intermediate dynamics—not just the final assembly—when seeking control over connectivity and structural uniformity.

Access Official Technical PDF

About The Author