Access Official Technical PDF

Share Summary:LinkedInEmail

A p-n junction diode is more than a one-way current path. Its electrical behavior reflects how electrons and holes move, recombine and respond to the electric field at the junction. For automation engineers and system designers, these semiconductor fundamentals help explain diode conduction, switching, voltage-dependent capacitance and the operation of photodetectors.

How the depletion region forms

When p-type and n-type semiconductor regions are joined, carriers diffuse across the boundary: electrons move from the n-side toward the p-side, while holes move in the opposite direction. Recombination near the interface leaves behind fixed ionized donors and acceptors. The resulting space-charge region, commonly called the depletion region, contains relatively few mobile carriers and establishes an electric field.

At equilibrium, the field balances the tendency of carriers to continue diffusing, so there is no net current through the junction. The voltage associated with this balance is the contact potential, or built-in potential. In the ideal abrupt-junction model, its value depends on the doping concentrations on both sides and the intrinsic carrier concentration of the semiconductor.

The depletion approximation treats mobile carriers as absent within the depletion region and assumes charge neutrality outside it. Charge balance requires the total positive and negative depletion-region charges to be equal. Consequently, the region extends farther into the more lightly doped side. This distribution matters when estimating the depletion width, peak electric field and charge stored at the junction.

P-n junction diode behavior under bias

An applied voltage changes the junction’s potential barrier. Forward bias lowers the barrier and narrows the depletion region, allowing carriers to be injected across the junction. Reverse bias raises the barrier and widens the depletion region, suppressing ordinary carrier injection.

Under forward bias, injected minority carriers diffuse into the neutral regions on either side and gradually recombine. Their concentration decreases with distance from the depletion-region boundary. In the steady-state model for a semi-infinite region, the excess-carrier profile decays exponentially, with its distance scale set by the diffusion length:

Diffusion length = √(diffusion coefficient × carrier lifetime)

The diffusion length therefore represents the average distance a carrier travels before recombination in this model. A longer diffusion length spreads the injected-carrier profile farther into the neutral material. The associated diffusion currents from electrons and holes combine to produce the ideal diode relationship: current is proportional to the exponential of applied voltage divided by thermal voltage, minus one.

The two carrier contributions need not be equal. The dominant contribution generally comes from injection from the more heavily doped side into the more lightly doped side. Doping also affects minority-carrier concentrations and diffusion lengths, so it influences the current for a given applied voltage.

Reverse bias, breakdown and junction capacitance

In reverse bias, minority carriers that reach the depletion region are swept across by its electric field. Their arrival may involve diffusion through the neutral regions, while their movement through the junction is field-driven. For sufficiently large reverse bias, breakdown can occur through Zener tunneling or avalanche multiplication. In avalanche breakdown, energetic carriers create additional electron-hole pairs through impact ionization. Reverse breakdown is not inherently destructive when current is limited externally.

A p-n junction also behaves as a voltage-dependent capacitor. Under reverse bias, the main contribution is junction capacitance: changing the voltage changes the depletion-region width and the charge separated across it. As the depletion region widens, the junction capacitance changes. This property is used in varactor devices, where the junction’s capacitance varies with applied voltage.

Forward bias introduces another effect: charge-storage, or diffusion, capacitance. Injected carriers accumulate in the neutral regions, and the stored charge does not disappear instantly when voltage changes. This can affect switching behavior and limit operation in high-frequency circuits. The distinction is useful in design: depletion capacitance is prominent in reverse bias, while stored-charge capacitance can dominate in forward bias.

From junction physics to light sensing

Light absorbed in a semiconductor generates electron-hole pairs. In an illuminated junction, carriers generated close enough to reach the junction can contribute to photocurrent. Under short-circuit conditions, this produces a short-circuit current; under open-circuit conditions, it produces a measurable open-circuit voltage. A solar cell uses this photovoltaic response to deliver electrical power to a load.

Photodiodes use the same carrier-generation principle for light detection. In a PIN photodiode, an intrinsic region is placed between p-type and n-type regions. Carrier drift through the electric field is faster than diffusion through neutral regions, so device design seeks to favor generation in the depletion region while balancing the depletion width against bandwidth. The geometry and material structure therefore affect how generated carriers reach the contacts.

Practical implications for device selection

For industrial electronics, the relevant junction mechanism depends on the circuit’s operating conditions. When assessing a diode or detector, consider:

  • Bias and depletion width: forward and reverse bias change the junction field and the width of the space-charge region.
  • Carrier transport: diffusion length and recombination shape the distribution and lifetime of injected carriers.
  • Capacitance: junction capacitance varies with bias, while stored charge can affect forward-bias switching.
  • Illumination: photodiode and solar-cell response depends on optical carrier generation and collection.
  • Breakdown conditions: reverse breakdown mechanisms differ, and external current limitation is important.

Understanding these relationships gives engineers a practical basis for interpreting diode current-voltage behavior, evaluating switching effects and choosing junction devices for sensing or power circuits. The key is to connect terminal behavior to what is happening inside the semiconductor: carrier injection and recombination, electric-field-driven transport, charge storage and optical generation.

Access Official Technical PDF

About The Author