Understanding how temperature affects a metal-semiconductor contact is important when evaluating its electrical behavior. In a study of an Mn-doped lead sulfide (PbS) Schottky diode, researchers measured current-voltage characteristics across 303–333 K and examined how key junction parameters changed. The work also characterized the deposited film’s structure and morphology, connecting the material properties with the behavior of the finished junction.
PbS is a narrow-band-gap semiconductor, while a Schottky barrier junction is formed when a metal makes a rectifying contact with a semiconductor. Such junctions are used in electronic devices including rectifiers and detectors. The study’s specific device—a gold contact on n-type, Mn-doped PbS with an indium tin oxide (ITO) back contact—offers a case study in how temperature and interface effects can influence measured diode characteristics.
PbS Schottky diode fabrication and film characterization
The Mn-doped PbS films were deposited by chemical bath deposition (CBD), a solution-based technique. Lead acetate provided lead ions, manganese acetate supplied the dopant, and thiourea supplied sulfur. The bath was adjusted to pH 11, heated to 313 K for one hour, and then left overnight at room temperature to continue deposition. Films were formed on glass for material analysis and on ITO-coated glass for electrical testing.
Gold electrodes measuring 2 mm by 2 mm were deposited on the PbS film to create the Au/(n)PbS/ITO junction. The semiconductor was identified as n-type using a hot-probe method. Researchers used X-ray diffraction (XRD), energy-dispersive X-ray analysis (EDX), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) to examine the film.
XRD indicated a polycrystalline cubic PbS structure, with a preferred orientation along the (200) direction. The average crystallite size calculated from XRD was 14 nm. TEM showed particles in the 3–13 nm range, broadly consistent with the XRD result. EDX detected lead, sulfur and manganese in the film, while SEM showed a dense, smooth, homogeneous surface composed of grains with varied shapes and sizes.
How temperature changed junction behavior
Current-voltage measurements were taken in darkness from 303 K to 333 K. The junction showed rectifying behavior at room temperature both in darkness and under illumination at 1100 lux. Under illumination, the current-voltage response also exhibited a photovoltaic effect. At temperatures above 303 K, the measured current increased markedly with voltage.
The researchers analyzed forward-bias current using the thermionic-emission model. In this approach, the ideality factor indicates how closely a diode’s current follows the ideal model; departures can reflect non-ideal junction behavior. The extracted ideality factor fell from 6.29 at 303 K to 4.88 at 333 K. Over the same temperature range, saturation current density rose from 0.361 × 10-6 A/cm² to 4.351 × 10-6 A/cm².
The barrier height derived from the temperature-dependent current-voltage analysis increased from 0.808 eV at 303 K to 0.832 eV at 333 K. The authors associated the temperature-related changes in barrier height and ideality factor with an inhomogeneous distribution of barrier heights at the metal-semiconductor interface. This points to an important practical consideration: measured diode parameters can reflect the quality and uniformity of the interface, not only the properties of the bulk semiconductor.
Series resistance and capacitance-voltage analysis
The current-voltage curves departed from a straight-line relationship in part of the forward-bias region. The study attributed this behavior to series resistance between the depletion region and the ohmic back contact. That resistance reduces the voltage actually applied across the barrier compared with the externally applied voltage, affecting interpretation of the diode’s response.
Calculated series resistance decreased substantially with temperature, from 14 kΩ at 303 K to 1 kΩ at 333 K. The authors linked this decrease to an increase in free charge carriers as temperature rose. For device evaluation, this result underlines why series resistance should be considered alongside ideality factor and barrier height, particularly when comparing measurements made at different temperatures.
Capacitance-voltage (C-V) measurements at 303 K and 1 kHz provided another view of the junction. A plot of inverse capacitance squared against voltage was used to estimate the carrier concentration, which was reported as 5.075 × 1016 cm-3. The barrier height derived from the C-V analysis was 0.81 eV. This was higher than the value obtained from the current-voltage measurement at room temperature. The study discusses possible contributions from an interfacial layer containing defects and from differences between the measurement methods.
What the results mean for device evaluation
The results show that temperature affects several linked parameters in this Mn-doped PbS junction: ideality factor, saturation current, barrier height and series resistance. No single measurement captures the full electrical picture. Current-voltage analysis characterizes rectification and temperature-dependent transport, while C-V analysis provides an estimate of carrier concentration and a separate barrier-height value. Structural and compositional measurements help establish what film was used to form the contact.
For engineers and technical decision-makers assessing semiconductor junctions, the practical lesson is to interpret diode parameters in context. Interface uniformity, series resistance and test temperature can all influence the reported response. In this study, CBD produced nanocrystalline Mn-doped PbS films and a functioning rectifying Au/(n)PbS/ITO junction, while temperature-dependent testing revealed substantial variation in its electrical characteristics. These findings provide a basis for further evaluation of the material and its metal-semiconductor contacts, without implying performance beyond the conditions tested.