PEM water electrolysis offers industrial operators a way to produce high-purity hydrogen from water using electricity. When powered by surplus wind or solar generation, an electrolyzer can turn variable electricity into a storable energy carrier and a feedstock for industrial processes. For automation engineers and plant decision-makers, the technology’s value depends not only on the electrochemical cell, but also on how effectively the system responds to changing power, meets operating requirements, and manages cost and durability.
How PEM water electrolysis produces hydrogen
In a proton exchange membrane (PEM) electrolyzer, electrical energy drives the splitting of water into hydrogen and oxygen. The membrane is a solid polymer electrolyte that separates the anode and cathode while allowing protons to pass between them. At the anode, water is oxidized, releasing oxygen, protons, and electrons. Protons cross the membrane and combine with electrons at the cathode to form hydrogen.
The reaction is thermodynamically possible above 1.23 volts versus the reversible hydrogen electrode. The thermoneutral potential is 1.48 volts; operation above this point generates heat. In practice, cell performance also depends on the components surrounding the membrane, including catalyst layers, porous transport or diffusion layers, and flow fields that deliver water and remove gases.
Hydrogen production is related to the electrical charge passed through the cells, as described by Faraday’s law. Actual output and energy efficiency therefore depend on operating current, cell voltage, Faraday efficiency, and system design—not simply the rated capacity of the stack.
Why PEM systems suit renewable energy applications
Water electrolysis is one route for converting electricity into hydrogen, often described as power-to-gas. Hydrogen can be stored for later use, including electricity generation when demand rises. It can also serve as a chemical feedstock, support vehicle fueling, or be combined with carbon dioxide in methanation to produce renewable natural gas.
PEM systems offer several characteristics relevant to applications where the electricity supply varies. Compared with alkaline electrolysis, the solid membrane design reduces hydrogen crossover and allows differential-pressure operation. PEM electrolyzers also have a faster dynamic response than alkaline or solid oxide systems, making them a potential fit for fluctuating renewable power. By contrast, alkaline systems have liquid electrolyte that must be maintained at an appropriate temperature, while solid oxide electrolysis operates at high temperatures and is better suited to steadier operation than rapid changes.
Those characteristics do not remove the need for system-level planning. A power-to-gas installation must be assessed against requirements such as hydrogen production efficiency, response to power variation, minimum standby load, delivery pressure, and service life. The electrolyzer is one part of a wider energy-storage and utilization system.
Oxygen evolution catalyst: a central cost and durability challenge
The anode oxygen evolution reaction (OER) is a major materials challenge. PEM electrolyzers commonly use iridium oxide, or mixed oxides containing iridium and ruthenium, because the anode operates in a corrosive environment. Iridium is costly, and conventional electrode catalyst loadings are a barrier to reducing system cost. Lowering the amount of iridium is not enough on its own: the catalyst must also retain activity and stability during extended operation, particularly at high current density.
Catalyst activity and durability can pull in different directions. Thermal treatment can improve the stability of iridium oxide, but may reduce OER activity. Conversely, more active forms can be less stable. Catalyst composition, synthesis conditions, surface chemistry, and interaction with a supporting material all influence performance. Research on mixed-metal oxides and supported catalysts explores ways to reduce iridium use or improve stability, but translating laboratory catalyst development into large-scale manufacturing remains challenging.
Particle size also matters. Smaller iridium oxide particles provide more surface area relative to their bulk and can change the catalyst’s electronic and surface properties. In reported comparisons, smaller particles showed improved OER mass activity, illustrating why catalyst design involves more than selecting a material: morphology and structure affect how much of the catalyst is effectively used.
Why membrane-electrode assembly design matters
The catalyst layer must balance proton access, electrical contact, and the movement of water and oxygen. Perfluorosulfonic acid ionomer provides proton conductivity within the layer and can extend the region where the reaction occurs. However, too little ionomer can limit proton transport and access to active sites. Too much can increase resistance, reduce available void space, and impede oxygen removal.
This balance affects the membrane-electrode assembly (MEA) as a whole. The voltage losses attributed to a cell may include contributions from ionic and contact resistance, reaction kinetics, and mass transport. As operating current and pressure increase, optimizing layer composition and component interfaces becomes particularly important to avoid losses that undermine efficiency and catalyst utilization.
System integration and scale-up considerations
PEM electrolyzers can be integrated with wind or solar generation, or operated using surplus grid electricity. A photovoltaic-electrolysis arrangement may include a converter to match photovoltaic output to the electrolyzer’s operating characteristics. In wind-to-hydrogen applications, hydrogen can act as a buffer for variable generation while creating a usable product from surplus power.
For plant and project teams, evaluation should extend beyond stack specifications. Relevant questions include:
- How will the system handle changes in available electrical power and standby operation?
- What hydrogen delivery pressure and purity are required by the intended process or storage pathway?
- How do catalyst, membrane, and other MEA component costs affect the overall installation?
- What operating conditions and durability requirements must the stack meet?
- How will the electrolyzer interface with generation, hydrogen handling, and downstream equipment?
Manufacturing is another consideration: stack production accounts for a substantial share of PEM electrolyzer cost and energy use. Larger systems are commercially available, but scaling capacity does not eliminate the need to improve materials, manufacturing processes, and integration with other technologies.
Practical implications for industrial decision-makers
PEM water electrolysis combines high-purity hydrogen production with a compact, responsive technology suited to some renewable-energy and industrial applications. Its potential depends on matching system operation to the power source and hydrogen use, while accounting for efficiency, pressure, standby behavior, and service life. The most persistent technical hurdles are reducing reliance on costly anode materials without sacrificing catalyst stability, optimizing the MEA, and making stack manufacturing more cost-effective. For project teams, treating the electrolyzer as part of an integrated process—rather than as a standalone stack—is essential to assessing its practical role in energy storage and hydrogen supply.