Perovskite materials are attracting attention across energy conversion because their compositions and defect structures can be tuned for different functions. In industrially relevant research, that flexibility is being explored in alkaline water electrolysis, photoelectrochemical hydrogen production and catalytic conversion of CO2 to methane. In each case, performance depends not just on a material’s starting composition, but on how its structure and surface respond to operating conditions.
Why perovskite materials are adaptable
Perovskite-type oxides generally have the formula ABO3±δ. The A-site is commonly occupied by an alkaline, alkaline-earth or lanthanide element, while the B-site typically contains a transition metal. The structure can accommodate changes in these cations and substantial distortions of its metal-oxygen framework. Oxygen non-stoichiometry—departures from the ideal oxygen content—can also help compensate for substitutions in the lattice.
These features allow researchers to adjust electronic and ionic behavior. Depending on composition and conditions, perovskites may support electronic conduction, oxygen-ion transport, proton conduction or mixed ionic and electronic conduction. Oxygen vacancies can influence both charge transport and catalytic behavior, making defect chemistry an important design consideration rather than a minor variation in composition.
Perovskite oxide electrocatalysts for water electrolysis
In alkaline water electrolyzers, the oxygen evolution reaction (OER) takes place at the anode and is a kinetic bottleneck. Its sluggish reaction rate contributes to the overpotential required for electrolysis. Hydrogen produced by electrolysis can be stored separately from the device, offering a way to use surplus renewable electricity when it is available and retain energy for later use.
Perovskite oxides are being investigated as OER electrocatalysts alongside established nickel-based oxide catalysts. Their broad range of possible compositions creates opportunities to tune activity, but it also complicates the search for a single property that predicts performance. Studies relating OER activity to factors such as electronic conductivity, oxygen-vacancy content and flat-band potential indicate that no one parameter reliably explains activity across a broad range of perovskites. A more useful approach is to consider multiple material properties together.
Surface changes under operating conditions
Operando X-ray absorption spectroscopy has helped reveal that some perovskite catalysts change electronically and structurally during the OER. For compositions such as barium-strontium cobalt-iron oxide (BSCF), measurements have shown the formation of a cobalt- and iron-containing oxyhydroxide surface layer after the OER onset potential is reached.
This transformation is linked to lattice oxygen evolution and the dissolution of some cations. In the proposed dynamic process, less-soluble cobalt and iron species can redeposit at the surface as an amorphous oxyhydroxide layer, while oxygen from the alkaline electrolyte helps replenish lattice oxygen. The underlying perovskite remains important: it is not simply a disposable precursor, but can support and contribute to the activity of the reconstructed surface. Iron also plays a role in the activity and stability of these cobalt-based materials.
Perovskite oxynitrides for solar-driven hydrogen research
Replacing some oxygen with nitrogen in selected perovskite oxides produces oxynitrides with different optical properties. Materials such as LaTiO2N and BaTaO2N have band gaps in the visible-light range, and their band-edge positions can support the reactions needed for water splitting. Light absorption generates electrons and holes; these charge carriers must then reach the semiconductor surface and participate in hydrogen- and oxygen-producing reactions.
Powder oxynitrides can be prepared by ammonolysis, heating precursor oxides in ammonia. For photoelectrochemical testing, powders may be combined with cocatalyst nanoparticles, which help extract charge carriers at the solid-liquid interface and support surface reactions. A photoelectrode is illuminated in an electrolyte, and its current is measured as the applied potential changes. Chopped illumination can help distinguish light-driven response from current associated with applied voltage.
Thin films offer a complementary research tool. Their crystalline structure and well-defined surfaces can help investigate charge transport and interfacial reactions, while powder electrodes provide different surface morphology and fabrication considerations. Research on LaTiOxNy films has also shown that crystal orientation and surface termination can affect photoelectrochemical activity. These findings underscore the need to evaluate bulk light absorption and charge transport alongside surface chemistry.
Self-regenerating perovskite catalysts for CO2 methanation
CO2 hydrogenation, or the Sabatier reaction, combines CO2 and hydrogen to produce methane and water. A challenge for nickel-based catalysts is that nickel particles can grow during operation, reducing the stability of the active component. Perovskite supports are being studied for their potential to limit this problem through self-regeneration.
In a self-regenerating cycle, reducing conditions cause an active metal such as nickel to segregate from the perovskite lattice as particles. Under oxidizing conditions, the metal can re-enter the lattice. For LaFe0.8Ni0.2O3, research has examined the conditions that allow nickel to segregate and be reincorporated, and has demonstrated regeneration after carbon deposits, or coke, deactivate the catalyst. Oxidation removes carbon and restores nickel to the perovskite structure; subsequent reduction produces dispersed nickel particles again.
This is a treatment-based regeneration mechanism, not a way to prevent deactivation under all conditions. The oxidation and reduction conditions, nickel loading and reaction environment matter. Repeated redox cycling can also lead to particle growth when the material follows a supported-catalyst pathway rather than fully restoring the original lattice.
Practical implications for material selection
Across these applications, perovskite performance cannot be assessed from composition alone. Engineers and technical teams evaluating candidate materials should consider:
- Defect chemistry: oxygen vacancies can affect transport, surface flexibility and catalytic behavior.
- Operating-state structure: surfaces may reconstruct or form new active phases during reaction.
- Interfaces: support, electrolyte, cocatalyst and current-collector interactions can influence observed performance.
- Regeneration conditions: redox cycling may restore catalyst structure, but its operating window must be established.
Perovskites provide a versatile platform for exploring electrochemical, photoelectrochemical and catalytic energy conversion. Their practical potential depends on understanding the relationship between composition, defects and working-state transformations—and on matching material design to the requirements of each process.