In photovoltaic design, capturing more of the incoming light is only part of the challenge. A tandem solar cell must also manage photons with different energies: some may pass through an upper cell for absorption below, while others can be reflected or lost as heat. A simulation study of photonic crystal solar cells examines how engineered optical layers could address these challenges in a two-junction silicon device.
The proposed design combines an anti-reflection coating (ARC) at the cell surface with an intermediate reflective layer (IRL) between the top and bottom cells. Using one-dimensional photonic structures, the modeling investigates how layer materials, thicknesses, and periodicity shape transmission and reflection across selected wavelength ranges. The results are optical simulations, not a measured demonstration of improved electrical output.
Why tandem solar cells need wavelength management
The modeled tandem cell pairs hydrogenated amorphous silicon (a-Si:H), with a higher energy gap of about 1.7 eV, as the top cell with microcrystalline silicon (μc-Si:H), with a lower energy gap of about 1.1 eV, as the bottom cell. This arrangement lets the two absorbers work with different portions of the solar spectrum.
Photons below an absorber’s energy gap may pass through without generating an electron–hole pair. Photons above the gap can generate charge carriers, but their excess energy is converted to thermal energy. Other potential losses include reflection at surfaces, incomplete absorption in a finite-thickness layer, recombination, and shading or coverage from metal electrodes.
Optical design can help address some of these losses. The ARC aims to reduce reflection at the front surface, allowing more incident light to enter the active region. The IRL has a different role: it is designed to reflect selected shorter-wavelength light toward the top cell while transmitting longer wavelengths to the bottom cell. The goal is to direct photons to the junction that is better suited to absorb them.
Photonic crystal solar cells: the modeled layer designs
Photonic crystals are structures with a periodically varying refractive index. Their photonic band gaps (PBGs) are wavelength ranges in which light propagation is restricted by the structure. By adjusting the refractive-index contrast, layer thicknesses, and number of periods, designers can alter the spectral response.
A multilayer anti-reflection coating
The modeled ARC uses silicon nitride (Si3N4) embedded between silicon dioxide (SiO2) layers. The study reports selected thicknesses of 98 nm for the upper SiO2 layer, 48 nm for the Si3N4 layer, and 8 nm for the third SiO2 layer. In the simulations, the Si3N4 design achieved transmission of about 90%, compared with about 80% for the alternative embedded SiC material.
The researchers also examined how the thickness of the third dielectric layer affected reflection at the interface with the a-Si:H top cell. Their modeled results identified 8 nm as the preferred thickness among the cases considered for reducing reflection. These values describe the specific simulated design; they should not be treated as universal coating specifications.
An intermediate reflector with a tunable band gap
For the IRL, the study models a binary one-dimensional structure made from aluminum-doped zinc oxide (ZnO:Al) and hydrogenated microcrystalline silicon oxide (μc-SiOx:H). The refractive indices used were 2 and 2.8, respectively. In the reported design, the layer thicknesses were 62 nm for ZnO:Al and 40 nm for μc-SiOx:H, with the number of periods varied.
Increasing the number of periods changed the simulated reflection and transmission. The study reports that, with 10 periods, reflection fell to zero within the PBG region for the configuration examined. Changing layer thickness also shifted the band gaps toward longer wavelengths. This illustrates an important design trade-off: spectral behavior depends on the combined effect of refractive-index contrast, individual layer thickness, and the number of repeated layers.
What the combined optical response suggests
The study combines multiple IRL sections with different μc-SiOx:H thicknesses to create a broader spectral response. In the reported combined structure, the simulated PBG extended from approximately 400 to 775 nm, where the structure behaved as a reflector for the top cell. From approximately 775 to 1100 nm, transmission approached unity, allowing longer-wavelength light to pass toward the bottom cell.
This is the core light-management concept: use the optical stack to reflect and transmit different parts of the spectrum selectively, rather than treating all incident light alike. For a tandem-cell design, that could help reduce optical losses and direct photons toward the relevant junction. However, the paper does not report the resulting current density or an experimentally measured efficiency gain; those were identified as work for a later stage.
Why use two simulation methods?
The modeled structures were analyzed using MATLAB with the transfer matrix method (TMM) and COMSOL Multiphysics with the finite element method (FEM). TMM calculates how electromagnetic waves interact with a sequence of thin layers. FEM provides a numerical approach for modeling fields in a defined structure. The study reports that the two methods produced comparable transmission behavior for the photonic-crystal designs.
Agreement between computational approaches supports confidence in the reported optical trends, but it does not replace fabrication and measurement. Practical evaluation would need to establish how a physical device performs, including its electrical output and response under operating conditions.
Temperature and the limits of the findings
The ARC simulations also considered temperature-related changes in refractive index and layer thickness. The modeled transmission increased as temperature decreased across the cases examined, which the authors associated with thermo-optic and thermal-expansion effects. They consequently described the design as potentially more suitable for colder conditions. This is a conclusion from the optical model, not evidence of a field-tested seasonal performance advantage.
For engineers and technical decision-makers, the practical takeaway is that photonic layers offer design variables for controlling reflection and directing light within tandem solar cells. The reported simulations provide a framework for exploring those variables, while also underscoring the next steps: validate the optical structure experimentally and assess its effect on electrical performance before drawing conclusions about efficiency.