Access Official Technical PDF

Share Summary:LinkedInEmail

Semiconductor behavior underpins the operation of many electronic components used in industrial automation systems. A useful starting point is the PN junction: the boundary between p-type and n-type semiconductor material. Understanding how doping creates these regions, how charge carriers move, and how voltage changes the junction helps explain diode behavior and other semiconductor structures.

How semiconductor doping changes conductivity

Pure, or intrinsic, silicon contains relatively few mobile charge carriers at room temperature. Thermal energy creates some free electrons and holes, but relying on thermal generation alone does not provide a practical way to set conductivity—and makes carrier availability dependent on temperature.

Doping addresses this by intentionally adding impurity atoms to the silicon crystal. Adding atoms with three valence electrons, such as boron, creates p-type material with an increased concentration of holes. These atoms are called acceptors. Adding atoms with five valence electrons, such as phosphorus, creates n-type material with more free electrons; these impurities are called donors. Doped semiconductor is also known as extrinsic semiconductor.

In sufficiently doped material, the majority-carrier concentration is approximately equal to the dopant concentration: holes in p-type material and electrons in n-type material. The other carrier type remains present at a lower, minority-carrier concentration. At equilibrium, the product of electron and hole concentrations follows the law of mass action. Doping changes the balance between the two populations, but the material remains electrically neutral overall because impurity-ion charges balance the majority carriers.

Drift and diffusion current in semiconductors

Charge carriers move through semiconductor material by two distinct mechanisms: drift and diffusion. Both contribute to current, but they arise from different conditions.

  • Drift occurs when an electric field acts on carriers. Holes move in the direction of the field, while electrons move in the opposite direction. Because electrons carry negative charge, both carrier movements contribute to conventional drift current in the direction of the electric field. Carrier mobility describes how readily carriers move in response to that field.
  • Diffusion occurs when carrier concentration varies from one location to another. Carriers move from regions of higher concentration toward regions of lower concentration. A maintained concentration gradient can therefore produce diffusion current even without the electric-field mechanism that drives drift.

These mechanisms matter together in a PN junction. The junction’s built-in electric field drives drift, while differences in carrier concentration encourage diffusion. Understanding their balance is key to understanding the diode’s response to an applied voltage.

PN junction equilibrium and the depletion region

When p-type and n-type regions meet, majority carriers initially diffuse across the boundary: holes move from the p-side toward the n-side, and electrons move from the n-side toward the p-side. Near the junction, electrons and holes recombine. This leaves behind fixed, ionized donor and acceptor atoms that are no longer balanced by mobile majority carriers.

The region around the boundary that becomes depleted of mobile carriers is called the depletion region. Its uncovered bound charges create an electric field and a built-in barrier voltage. This barrier opposes further majority-carrier diffusion. At open-circuit equilibrium, diffusion current and drift current are equal in magnitude and opposite in direction, so there is no net current through the junction.

The built-in voltage exists across the depletion region; it is not an available supply voltage at the open terminals. For silicon at room temperature, the source material gives a typical built-in voltage range of 0.6 to 0.9 V.

How forward and reverse bias affect diode current

Applying an external voltage changes the barrier and the depletion-region width. With forward bias—the p-side made positive relative to the n-side—the applied voltage reduces the effective barrier. The depletion region narrows, allowing more majority carriers to cross the junction. Their movement increases diffusion current, while the minority-carrier drift component remains comparatively unaffected by the applied junction voltage. The resulting diode current rises strongly as forward voltage increases.

With reverse bias, the external voltage adds to the built-in barrier. The depletion region widens, and majority-carrier diffusion is reduced. A small reverse current remains, carried by thermally generated minority carriers swept across the junction by the electric field. This drift component depends strongly on temperature.

If reverse voltage becomes sufficiently high, the junction can enter breakdown. In Zener breakdown, a strong depletion-region electric field generates electron-hole pairs by breaking covalent bonds. In avalanche breakdown, energetic carriers collide with atoms and generate additional carriers, creating a multiplying process. In either case, reverse current can rise substantially, so it is limited by the external circuit. The peak inverse voltage, or peak reverse voltage, specifies the maximum reverse-bias potential before breakdown.

PN junction capacitance and practical implications

A PN junction also has capacitive behavior. Under reverse bias, the depletion region separates charge on either side of the junction. Changing the reverse voltage changes the depletion width and therefore the junction, or depletion-layer, capacitance. This makes the junction a voltage-dependent capacitor.

Under forward bias, injected minority carriers are stored in the p-type and n-type regions. The capacitance associated with this stored charge is called diffusion capacitance and is dominant in forward-biased operation. These two effects arise from different charge-storage mechanisms, so the relevant capacitance depends on the junction’s operating condition.

Conclusion

For engineers and technical decision-makers, the practical value of these fundamentals is a clearer picture of how semiconductor devices respond to material properties and circuit conditions. Doping establishes the carrier populations; drift and diffusion describe carrier transport; and the PN junction’s depletion region shapes current under forward and reverse bias. The same junction also exhibits bias-dependent capacitance and can conduct heavily in reverse breakdown. Together, these principles provide a foundation for interpreting diode behavior in electronic circuits used throughout automation systems.

Access Official Technical PDF

About The Author