Access Official Technical PDF

Share Summary:LinkedInEmail

A porous resin composition offers a route to forming porous materials without first dispersing solid particles in a liquid. Instead, a polymerizable compound and a compatible solvent are combined in a liquid formulation. During curing, the growing resin becomes incompatible with the solvent, prompting phase separation and creating the structure from which a porous resin can be produced.

This approach is relevant to engineers and technical decision-makers evaluating materials for separation membranes, adsorption media, battery separators and other porous structures. Its practical appeal lies in the potential to combine a stable, applicable liquid with a pore-forming process that occurs during polymerization.

How a porous resin composition forms pores

The formulation contains at least a polymerizable compound and a solvent. The solvent also functions as a porogen: it is compatible with the polymerizable compound before curing, but becomes incompatible with the polymer as the compound reacts and forms a resin.

This change in compatibility drives polymerization-induced phase separation. As polymerization progresses, the resin’s solubility in the porogen decreases. The resin and porogen separate into distinct phases, with the developing resin forming a network around regions occupied by the porogen. At this stage, the pores may still contain solvent. A subsequent drying process removes the porogen, leaving a porous resin.

The distinction between the uncured and cured states is central to formulation. The liquid should be sufficiently uniform before application, while the polymer and porogen must separate during or after curing to generate porosity. If the formulation separates too early, it may be difficult to apply consistently; if the cured resin remains too compatible with the porogen, the intended porous structure may not develop as readily.

Compatibility criteria for evaluating the liquid

The described composition uses two measurable indicators to characterize these different states. When stirred, the liquid transmits at least 30% of incident light at a wavelength of 550 nm. This light-transmission criterion is used to indicate compatibility between the polymerizable compound and the solvent in the liquid formulation.

After curing, the haze value of an element containing the liquid composition increases by at least 1.0%. The haze increase is used as an indicator that the resin and solvent have become incompatible and phase separation has occurred. Together, the two criteria describe a useful formulation pattern: compatibility before polymerization, followed by incompatibility as the resin forms.

These thresholds are formulation indicators, not a complete prediction of every property of a finished porous material. The resulting structure depends on the relationship between the selected polymerizable compound, the porogen and the resin formed during curing.

Material selection and formulation trade-offs

Choosing the polymerizable compound

Polymerizable compounds form the resin network. Examples include acrylate, methacrylate, urethane acrylate, vinyl ester, unsaturated polyester, epoxy and oxetane materials. Radical-polymerizable compounds with two or more functional groups are identified as preferred options in the described approach. The choice of resin chemistry affects the formulation’s compatibility relationships and the properties of the resulting network.

As a general formulation range, the polymerizable compound is described at 5–70% by mass, with narrower preferred ranges also provided. Too little polymerizable material may limit formation of a sufficiently developed network; too much can affect porosity and the ease with which liquid or air passes through the resulting medium. These ranges are starting points for material design, rather than substitutes for application-specific testing.

Selecting the porogen

The porogen must work with both stages of the process: it should be compatible with the uncured polymerizable compound and become incompatible with the polymer during polymerization. Solvent candidates described include glycol ethers, esters, amides and other liquids. The appropriate choice depends on the particular polymerizable compound and the resin it forms; a liquid’s suitability cannot be judged by its name alone.

Boiling point is another consideration. A porogen with a suitable boiling point can be easier to handle in the liquid formulation and can be removed after polymerization. The formulation also needs enough porogen to support pore formation, while retaining sufficient polymerizable material to create a network with useful strength.

Hansen solubility parameters can help assess compatibility. They represent dispersion, dipole and hydrogen-bonding interactions, and can be used to compare the relative affinity of substances. This offers a structured way to screen combinations, but the composition’s behavior before and after curing remains important to verify.

Implications for coating and printing processes

A liquid composition designed for porous resin formation can be applied using different methods, including coating, printing and inkjet approaches. The flexibility of material selection may help formulation designers balance pore formation with practical application requirements. For example, when considering inkjet application, viscosity and stable discharge are relevant alongside the compatibility needed for phase separation during curing.

The described process can include applying the liquid to a substrate, curing it to form a porous-resin precursor and heating that precursor to obtain the porous resin. The application method, curing conditions and any subsequent drying or heating steps must be considered as part of the manufacturing sequence. A formulation that meets the optical criteria still needs to be assessed for the intended equipment and process.

Practical implications

For teams developing porous materials, the key is to design for a controlled change in compatibility. The polymerizable compound and porogen should form a suitable liquid before curing, then separate as polymerization creates the resin network. Light transmission during stirring and haze change after curing provide indicators for evaluating those two stages.

This approach can broaden the options for applying pore-forming materials, but success depends on matching the resin chemistry, porogen, application method and curing sequence. Treating compatibility as a process variable—not simply a property of the uncured liquid—helps engineers assess whether a formulation is suited to their manufacturing requirements.

Access Official Technical PDF

About The Author