Power electronics design is a system-level discipline: improving a converter’s efficiency or switching speed can affect control, electromagnetic compatibility (EMC), thermal performance and reliability elsewhere in the equipment. A 2016 PCIM Europe conference program brought these interdependencies into focus through sessions on semiconductor devices, converter topologies, magnetics, motion control, renewable energy and e-mobility. Its themes offer a useful framework for engineers and technical decision-makers evaluating power conversion systems.
Power electronics design starts with trade-offs
Converter design choices are rarely independent. Topology, switching frequency, control strategy, semiconductor characteristics and passive components all influence the finished system. The program’s coverage of silicon carbide (SiC) and gallium nitride (GaN) devices, alongside silicon MOSFETs and IGBTs, reflected the need to assess new device technologies in the context of real circuit requirements.
Faster switching can change the demands placed on gate drives, circuit layout and control hardware. It also makes parasitic effects and high-frequency behavior important design considerations. A device choice that appears attractive on switching performance alone may require a different topology or control approach to meet the application’s efficiency, density, cost and reliability goals.
Soft switching illustrates this balancing act. Techniques such as zero-voltage switching shape circuit conditions to reduce switching-related losses, but some implementations add components and complexity. The relevant question is not simply whether soft switching is beneficial, but whether its advantages justify the added design and integration effort in a particular converter.
Converter efficiency depends on the whole power train
Efficiency improvement requires attention to multiple loss mechanisms, not just semiconductor conduction or switching losses. Conference topics included reverse-recovery losses in rectifiers, losses in magnetic components, and the effects of parasitic elements. These considerations apply across power-factor correction (PFC) stages, isolated DC-DC converters, inverters and motor drives.
Magnetics can be especially challenging in high-power converters. Inductors and transformers must meet electrical requirements while fitting constraints on size, weight and cooling. Loss estimates need to account for switching-frequency effects, winding resistance, skin and proximity effects, and flux near air gaps. Design validation may combine analytical calculations, finite-element analysis, circuit simulation and measurement.
Measurement itself requires care. The program highlighted potential errors in magnetic-loss measurements, including issues associated with low power factor and phase-angle accuracy. For engineers, this reinforces a practical point: loss calculations and test methods should be examined together when investigating thermal performance or comparing design alternatives.
Control and EMC are integral to converter performance
Control strategy affects how a converter responds to changes in input voltage and load, protects against faults, and maintains operation across a range of conditions. Topics in the program included current-mode and ripple-based control, feedforward methods, phase shedding, pulse-frequency modulation and approaches to fast transient response. The appropriate method depends on the converter architecture and its operating requirements.
Digital implementation adds another layer of design work. Algorithms may be implemented using microcontrollers, digital signal processors or FPGAs, with current sensing, sampling, modulation and parameter tuning all contributing to system behavior. In motion-control and mains applications, engineers must consider how sensing and control interact with the power stage rather than treating the controller as a separate add-on.
EMC is similarly tied to circuit behavior. Fast voltage and current transitions can contribute to differential-mode and common-mode interference. Coupling paths may include active circuits, parasitic capacitances, enclosures, grounds, heat sinks, transformers and motor structures. Filter selection is only one part of the response: layout, wiring, grounding, gate-drive design and the relationship between inverter, cable and electric machine also matter.
Designers therefore face a related trade-off when setting semiconductor commutation times. Slower transitions may affect switching losses, while faster edges can increase EMC challenges. Understanding the system’s interference paths can help guide filter design and integration decisions without relying on shielding as the only remedy.
Reliability requires attention from device to system
Power modules and their surrounding circuits must withstand electrical, thermal and mechanical stresses. The conference program addressed module materials and layouts, thermal mismatch, power cycling, short-circuit ruggedness, protection and topology-dependent losses. These are connected concerns: operating conditions influence junction temperatures and thermal cycling, while module parasitics can contribute to oscillations and electrical stress.
Protection design also needs to reflect credible failure conditions. Topics included current, voltage and temperature protection, as well as failure detection and overload or overvoltage response. For system integrators and plant engineering teams, these considerations should be part of specification and design review—not deferred until commissioning or troubleshooting.
Application context matters. Grid-connected converters, renewable energy systems, uninterruptible power supplies, traction drives and industrial motor systems impose different operating profiles and integration constraints. Requirements for a component or converter should therefore be tied to its role in the complete installation.
Applying these themes to industrial projects
The program’s technical agenda suggests a practical review sequence for teams selecting or developing power conversion equipment:
- Define system priorities: Clarify the relative importance of efficiency, power density, response, cost, EMC and service life.
- Evaluate the complete topology: Assess semiconductor devices, switching method, control approach and passive components together.
- Review thermal and loss assumptions: Check magnetic and semiconductor losses, measurement methods and cooling constraints.
- Plan for integration: Consider wiring, grounding, sensing, protection and interactions with motors, cables or the wider electrical system.
- Validate under relevant conditions: Use analysis, simulation and measurement to examine performance across the intended operating range.
Conclusion
Power electronics design decisions shape more than conversion efficiency. They influence control behavior, EMC, thermal management, protection and system reliability. The topics highlighted at PCIM Europe 2016 underscore the value of evaluating power devices, converter topology, magnetics and integration as parts of one engineering problem. For industrial automation projects, this system-level approach helps teams make design and specification choices that reflect the demands of the complete application.