Power electronics research is increasingly concerned with more than the switching device itself. As wide-bandgap semiconductors enable higher switching frequencies, voltages and operating temperatures, the surrounding components—including capacitors, magnetic elements, packaging and thermal management—become central to system performance. Sandia National Laboratories’ technology portfolio illustrates how research across components, materials, energy storage and sensing can address these connected engineering challenges.
The technologies described span different stages of development and application. Some are intended for electric-drive systems, while others focus on batteries, manufacturing processes, fuel cells or sensing. Together, they offer a view of research directions that technical teams can assess for relevance to their own system requirements.
Power electronics research beyond the semiconductor
Silicon carbide (SiC) and gallium nitride (GaN) switches can support demanding power-conversion conditions. But realizing their potential requires attention to the rest of the converter. In an inverter, for example, the DC link must accommodate high-frequency switching, limit parasitic inductance and operate near components that may run at elevated temperatures.
Sandia’s low-inductance DC power bus addresses this system-level issue. Its design uses a printed circuit board to increase planar capacitance and carefully places capacitors to reduce parasitic inductance. Ceramic capacitors are used in place of conventional electrolytic or film capacitors to support higher-temperature operation, while parallel capacitor placement provides a low-impedance path for high-frequency current components and helps smooth switching-related current spikes.
The design is intended for electric-drive systems and other applications where high-frequency switching or high-temperature operation is desirable. The practical engineering point is that power density and converter performance depend not only on semiconductor capability, but also on layout, passive-component selection and thermal considerations.
Scaling magnetic components for higher frequencies
Inductors and transformers can constrain the size and power density of power-electronic systems. Although newer semiconductor devices support higher switching frequencies, magnetic passive components have not necessarily scaled at the same pace. Energy losses that rise with frequency are one reason compact designs remain challenging.
Sandia’s nanoscale-enabled microinductor research combines a nonconducting, non-hysteretic magnetic nanocomposite with microsystems technology. The aim is to reduce losses while enabling smaller magnetic components. The portfolio describes a target of either a tenfold improvement in device performance or a tenfold reduction in size compared with current technology. These are stated development goals, not a general performance guarantee for deployed equipment.
For engineers evaluating next-generation converters, this work highlights a familiar integration challenge: improving switching devices alone may not deliver a smaller system if magnetic components remain a limiting factor.
Energy storage: safety, form factor and material choices
Battery development involves balancing power, energy density, durability, operating conditions and safety. Sandia’s solid-state thin-film lithium battery research uses a lithium-stable, higher-conductivity electrolyte and metal-foil substrates. The described design is intended to provide a compact battery form factor, with potential relevance to electric vehicles, flexible electronics and other low-profile applications. The research also reports improved conductance and power density relative to LiPON thin films; those comparisons apply to the materials and configurations discussed in the portfolio.
Battery safety is another part of the development picture. Sandia’s Battery Abuse Testing Laboratory supports energy-storage safety and reliability research, including calorimetry, destructive testing in hardened test cells and battery prototyping. For technology developers, these capabilities reflect the importance of testing system behavior under challenging conditions alongside efforts to improve cell performance.
Materials and manufacturing process innovations
Material properties and production methods can influence whether a promising design is practical to manufacture. Sandia’s rapid electropulsing method uses short, high-current-density electrical pulses to reduce chemical microsegregation in metallic additively manufactured parts. In the described work, electropulsing reduced microsegregation in 316L stainless steel after ten pulses without significantly changing hardness. For aluminum silicon magnesium parts, the reported treatment increased ductility in the as-fabricated condition.
The method is presented as an alternative to longer conventional heat-treatment processes for the materials studied, and it can target a small area rather than treating an entire part. These features may matter when teams are considering throughput, localized processing or post-processing options for additive manufacturing.
A separate research effort applies layer-by-layer nanocomposite films as conformal anti-corrosion coatings. The organized platelet layers are intended to limit permeability, while the deposition process is designed to reduce through-film defects and improve coating stability. The coating can be applied by dip coating or spraying and is described for surfaces including electronics and structural materials.
Sensing and hydrogen technologies broaden the portfolio
Sandia’s portfolio also includes sensing technologies with potential relevance to automotive, aerospace, communications and other settings. A horizontally polarized, dual-band GPS antenna is designed to maintain performance in cluttered signal environments and withstand high-shock and high-temperature conditions. Its antenna arrangement is intended to reduce coupling with nearby orthogonally polarized antennas.
In photonics, a nanoantenna phased array uses silicon waveguides and integrated phase shifters for non-mechanical optical beam steering. The architecture is described as a basis for chip-scale integrated lidar. These examples show how sensing research can intersect with system integration, packaging and environmental requirements.
Hydrogen and fuel-cell research addresses materials and performance challenges in a different part of the energy landscape. Sandia has developed polymer membrane technologies intended for acidic or alkaline environments, with a focus on stability and high-temperature operation. A gas diffusion electrode technique is designed to mitigate methanol crossover in direct methanol fuel cells, which can otherwise reduce operating voltage and power output.
What industrial technology teams can take away
Across these areas, the recurring theme is system-level engineering. Converter performance depends on passive components and thermal management; batteries require attention to safety as well as cell design; and advanced materials must be considered alongside manufacturing and coating processes. Sensing devices likewise need to be evaluated in the environments and integrated systems where they will operate.
For industrial automation engineers, integrators and technical decision-makers, the useful next step is to match a research concept to a clearly defined application need: operating temperature, switching behavior, form factor, material compatibility, manufacturing route or sensing environment. Sandia offers several partnership pathways, including licensing, cooperative research and development agreements, and reimbursable projects. Each technology’s readiness and availability should be assessed directly with the laboratory. The practical implication is that emerging research can inform future designs, but technology selection depends on application fit, validation and the development stage of the specific solution.