Access Official Technical PDF

Share Summary:LinkedInEmail

Power semiconductors are the switching devices at the heart of power electronics, controlling how electrical energy is converted and delivered. Their performance affects losses, thermal management and the design of equipment used in renewable generation, electric distribution, transportation and industrial applications. As demand grows for efficient and compact power-conversion systems, improvements to both silicon carbide (SiC) devices and silicon insulated gate bipolar transistor (IGBT) modules offer equipment designers new options.

Developments reported in 2017 illustrate two complementary approaches: using SiC to reduce switching and conduction losses, and advancing IGBT chips and module packaging to raise current capacity while managing heat and reliability. The practical choice depends on the voltage, current, operating frequency and physical constraints of the application.

Why power semiconductors matter in energy management

Power conversion equipment connects energy sources, electrical networks and loads. In photovoltaic systems, for example, a power conditioning system converts the generated electricity for use or delivery to the grid. In distribution networks, power-electronic equipment can help address voltage fluctuations associated with distributed generation. Electric railcars and other high-power applications also rely on semiconductor modules to switch substantial currents.

Every switching event and period of conduction creates losses. These losses become heat that the equipment must dissipate, influencing cooling requirements and system design. Lower-loss devices can therefore offer more than an efficiency benefit: they can also create room to reconsider module size, heat sinks and operating frequency. Those outcomes depend on the complete system design, not solely on the semiconductor.

Silicon carbide modules for lower-loss conversion

Silicon carbide is a wide-bandgap semiconductor material. Compared with silicon devices, SiC devices can achieve lower power loss, making them relevant where designers need efficient conversion and higher-frequency switching. All-SiC modules combine a SiC metal-oxide-semiconductor field-effect transistor (MOSFET) with a SiC Schottky barrier diode (SBD).

One reported 1,200 V, 400 A All-SiC module used a trench-gate MOSFET and a newly structured package. The package used copper-pin connections, a thick copper ceramic insulating substrate and high-heat-resistant epoxy resin. These design choices were intended to support dense chip mounting, reduce internal inductance and thermal resistance, and improve reliability.

In comparisons under specified test conditions, the module showed lower switching losses than a similarly rated silicon IGBT module. A related inverter-loss simulation reported a reduction of approximately 57% for the All-SiC module. These are results for the stated devices and operating conditions, rather than a guarantee of the same reduction in every application.

Applications in electric distribution

SiC can also address constraints in distribution equipment. A 3.3 kV All-SiC module developed for a static var compensator (SVC) was designed to support compact, self-cooled equipment suitable for mounting on a utility pole. Under the reported SVC operating conditions, inverter-generated loss was 64% lower than for the compared silicon IGBT module. The development also targeted operation above the audible frequency range, helping address equipment use in residential areas.

Advanced IGBT modules: capacity, heat and packaging

SiC is not the only route to improved power conversion. IGBT module development also focuses on chip characteristics and packaging. The 7th-generation X Series IGBT modules, for example, combined finer chip structures and thinner wafers with package improvements. The reported 1,700 V PrimePACK line included modules rated up to 1,800 A and specified continuous junction operation up to 175°C.

Higher current in a similar package can increase power density, but it also raises thermal and reliability challenges. A high-thermal-conductivity aluminum nitride insulating substrate was used in the highest-current modules to improve heat transfer. The development also addressed thermal cycling and insulation materials for elevated-temperature operation. Such measures matter because a module’s capability depends on the interaction among its semiconductor chips, substrate, bonding, enclosure and cooling arrangement.

Another packaging approach was the HPnC high-current SiC hybrid module, which combined X Series IGBT chips with SiC diodes. A laminated terminal structure reduced the module’s reported internal inductance to 10 nH. In the described comparison, two HPnC modules connected in parallel had lower inductance than the corresponding parallel arrangement of conventional HPM modules. Lower inductance can help control switching-related surge voltage, while the SiC diode can reduce reverse-recovery loss.

What engineers should consider when selecting a module

Module comparisons are most useful when they reflect the intended operating point and system architecture. Engineers and integrators should assess:

  • Voltage and current ratings: Confirm that the module suits the electrical requirements and expected load profile.
  • Conduction and switching losses: Evaluate losses at the relevant current, voltage, temperature and switching frequency.
  • Thermal path: Consider the substrate, base, cooling method and junction temperature together.
  • Layout and parasitic inductance: Review bus-bar connections, driver placement and parallel-module arrangements.
  • Reliability requirements: Account for operating temperature, thermal cycling and the service life expected of the equipment.

Published device comparisons and simulations provide useful design evidence, but their results are tied to stated test conditions. System-level validation remains important when translating module characteristics into equipment performance.

Conclusion

Advances in SiC devices and IGBT modules give power-electronics designers different ways to address conversion losses, equipment size and thermal demands. SiC modules can support low-loss, high-frequency operation, while enhanced IGBT chips and packaging can increase current capability and improve heat management. For industrial automation and energy systems, the practical decision is to match device technology and module construction to the application’s electrical, thermal, reliability and installation requirements.

Access Official Technical PDF

About The Author