Access Official Technical PDF

Share Summary:LinkedInEmail

Industrial wireless bridging can connect Ethernet networks where a wired connection is impractical or where a site needs a fixed wireless link. The Cambium Networks PTP 670 Series is designed for point-to-point (PTP) and High Capacity Multipoint (HCMP) wireless topologies, with system features that address radio operation, Ethernet transport, synchronization, management and installation. For automation teams, understanding how these functions fit together is an important step in evaluating a wireless link for a plant or distributed operation.

How the PTP 670 fits into an industrial network

In a PTP deployment, two wireless units form a bridge between network locations. This can provide a link between facilities, remote equipment areas or other locations that need Ethernet connectivity. HCMP extends the topology to a multipoint arrangement, where network planning must account for the relationship among the connected units and how wireless capacity is shared.

The PTP 670 guide describes Ethernet bridging as a central system function. It also covers data and management services, Ethernet switching, VLAN membership, quality of service for bridged traffic and allocation of Ethernet ports. These are practical considerations for integrators connecting a wireless segment to switches, controllers, supervisory systems or other network infrastructure. The radio link is only one part of the design: traffic separation, management access and the behavior of connected network devices also need attention.

Radio operation: OFDM, TDD and adaptive modulation

The system uses Orthogonal Frequency Division Multiplexing (OFDM), a radio technique that divides a channel into multiple subcarriers. The guide also addresses channel bandwidth, modulation, MIMO and spectrum management. Together, these topics shape how a wireless link is configured and how it operates under changing radio conditions.

Time division duplexing (TDD) separates transmission and reception in time. In PTP and HCMP topologies, the allocation of time slots affects how the radio link carries traffic in each direction. The guide describes link mode optimization, link symmetry and, for HCMP, dynamic time slot allocation. These settings matter when deciding whether the network should favor more balanced traffic or accommodate differing traffic demands in each direction.

Adaptive modulation allows the radio to adjust its modulation according to link conditions. As a result, link planning should consider more than a nominal distance: the radio path, obstacles, path loss, selected channel bandwidth and expected operating environment all affect capacity. The guide points to LINKPlanner for planning links and calculating capacity, and includes data capacity tables for PTP and HCMP configurations. These planning tools and tables support informed design rather than relying on a single headline throughput figure.

Wireless link planning and regulatory considerations

Frequency selection is constrained by the unit’s frequency variant, available spectrum and the rules of the country where it operates. The guide covers fixed-frequency operation, dynamic spectrum optimization, radar avoidance and regulatory limits. Installers must configure equipment for the applicable local requirements; the available options should not be treated as interchangeable across regions.

Site planning also includes the physical radio path and the equipment around it. The guide addresses ODU and antenna location, ambient temperature, wind loading, external antenna requirements and cable considerations. For connectorized units, antenna selection and RF cable length are additional design factors. These checks help ensure that the proposed installation, not just the network diagram, is suitable for the intended site.

Synchronization and network timing

Some deployments need coordinated operation across multiple radio links or require timing features in the Ethernet network. The PTP 670 guide covers TDD synchronization, including configurations using a PTP-SYNC unit, a CMM5 or a direct connection between outdoor units. It also identifies Synchronous Ethernet and IEEE 1588-2008 Transparent Clock functionality.

These options make timing a design decision to address early, alongside topology and traffic requirements. Integrators should determine whether synchronization is needed, how it will be provided and what connections or supporting equipment the installation requires. The appropriate arrangement depends on the planned network configuration.

Management, security and installation readiness

Operational visibility and access control are also part of a dependable wireless deployment. The guide describes a management agent, web server, cnMaestro device agent, SNMP, RADIUS authentication, system logging and network services such as DNS and SNTP. It also covers wireless encryption, TLS options, SNMPv3 security and software upgrades. Network teams can use these areas to plan monitoring, authentication, time services and secure management access in line with their operating practices.

Physical installation has its own requirements. The system documentation addresses grounding and lightning protection, outdoor Ethernet cabling, power supply placement, cable testing and safety procedures. It calls for attention to grounding points and lightning protection units, as well as suitable locations for the outdoor unit, power equipment and any synchronization or GPS equipment used. These are core installation considerations, not optional details to leave until commissioning.

Conclusion: design the link as part of the whole network

The PTP 670 Series brings radio transport, Ethernet bridging and network-management functions into a platform intended for PTP and HCMP wireless deployments. For industrial users, the practical task is to evaluate the complete connection: topology, traffic direction, radio path, spectrum rules, synchronization needs, security and site installation conditions. Planning these elements together helps system integrators and operations teams determine whether a wireless bridge is appropriate and how it should fit into the wider automation network.

Access Official Technical PDF

About The Author