Pulsed laser SEE simulation can help engineers interpret how a focused optical pulse produces a single-event effect in a microelectronic device. The key challenge is that the electrical response depends on where and when the laser deposits energy, not simply on the pulse energy measured outside the device. A first-principles workflow links optical propagation and charge generation to semiconductor device simulation, creating a more detailed picture of the path from incident light to measured current.
Why model pulsed laser single-event effects?
Particle accelerators are a traditional way to test for single-event effects (SEE), but access to accelerator facilities can be limited. Pulsed laser-induced SEE testing offers an alternative using tabletop laser systems. Because the optical pulse can be focused and positioned, the technique can provide spatially and temporally localized charge injection for examining device sensitivity.
Laser testing is not automatically a direct substitute for particle testing. A laser generates charge through photon absorption, whereas an ionizing particle deposits energy through different physical processes. Comparing their effects therefore depends on understanding the three-dimensional charge distributions each method creates. Simplified analytical approaches can be useful, but they may not represent every optical process that shapes charge generation inside a device.
How wavelength and focusing affect charge generation
When photon energy exceeds a material’s bandgap, a photon can generate an electron-hole pair through single-photon absorption (SPA). In this case, absorption causes the optical intensity to decay as light travels into the material. The wavelength-dependent absorption coefficient influences how deeply the pulse penetrates, which can limit testing where surface access is obstructed.
Sub-bandgap light offers another approach. Multiple photons can interact with an electron and supply enough combined energy to generate an electron-hole pair. In two-photon absorption (TPA), two photons contribute to one pair-generation event. Because this is a nonlinear process that depends on optical intensity, tightly focused pulses can concentrate charge generation near the focal region while reducing SPA-related generation. This can support through-substrate illumination, including in devices with topside metallization.
Focusing determines the pulse’s spatial intensity distribution. A Gaussian beam narrows toward its waist and spreads as it propagates away from the focus. Its energy distribution is also affected by the material: the refractive index changes the beam’s propagation behavior, while absorption removes energy. These effects matter when estimating where optical energy—and therefore generated charge—will be deposited.
Using FDTD to model optical energy deposition
Finite-difference time-domain (FDTD) modeling calculates electromagnetic fields over space and time. In a pulsed laser SEE workflow, an optical solver can represent the laser pulse and its interaction with the device structure, rather than treating charge generation as a prescribed, simplified distribution.
To model nonlinear absorption, the optical calculation must account for the relationship between the field and the material response. Linear optical properties describe effects such as refraction and absorption. Nonlinear processes modify that response, and their contribution can depend on field intensity. Free carriers add another important effect: mobile electrons and holes can influence both absorption and refraction as the pulse propagates.
Including these processes allows the simulation to estimate a spatial distribution of optically generated carriers. The modeling workflow must also represent relevant elements of the measurement setup and device geometry, including the laser source, materials, boundaries, simulation mesh, and data monitors. Choices about mesh resolution and boundary conditions shape how the optical problem is discretized and evaluated.
Connecting optical results to TCAD
An optical simulation describes field propagation and charge generation; it does not, by itself, determine the full electrical response of the device. To estimate that response, the generated-carrier distribution can be transferred into a technology computer-aided design (TCAD) simulation as an initial condition. TCAD then models device physics and charge transport under the relevant bias conditions.
Moving data between the optical solver and TCAD requires attention to file structure and spatial grids. The two tools may use different meshes, so the optical results must be mapped onto the TCAD mesh. This integration makes the quality of data handling, interpolation, and alignment between device geometries important parts of the overall simulation—not merely administrative steps.
The resulting sequence is:
- Define the optical setup: Specify the pulse, material properties, device geometry, mesh, and simulation boundaries.
- Calculate optical generation: Model propagation and relevant absorption effects to obtain a spatial carrier distribution.
- Transfer the distribution: Map the optical output to the device simulation grid and configure the generation input.
- Simulate electrical response: Use TCAD to calculate device behavior under the selected bias and pulse conditions.
- Compare with measurements: Evaluate simulated electrical transients against experimental results.
What diode comparisons demonstrate
The approach was compared with pulsed laser testing on a large-area silicon diode. Optical simulations accounted for free-carrier effects, and the resulting carrier distributions were used in TCAD device simulations. The study examined conditions including different pulse energies, focal positions, and reverse-bias voltages. Simulated current transients were compared with measured responses, with the reported results showing agreement across the investigated conditions.
The comparison also illustrates why optical modeling details matter. Free-carrier absorption and refraction can affect pulse propagation, particularly where carrier concentrations and doping profiles vary. Device bias can change the free-carrier distribution, while geometry—such as openings in metal layers or highly doped substrate regions—can influence the light and generated-charge profiles. A model that accounts for these interactions can reveal effects that a simple assumed charge profile may miss.
Practical implications for engineering teams
For engineers and technical decision-makers, the main benefit of combining FDTD with TCAD is a clearer connection between test conditions and electrical outcomes. Rather than treating the laser as an abstract source of charge, the workflow represents how the pulse propagates, where absorption occurs, and how generated carriers contribute to device response.
That detail can support more informed interpretation of laser-based sensitivity measurements and further work on relating pulsed laser results to particle-induced effects. It does not eliminate the need for experimental validation or guarantee that one model applies to every device. The optical properties, structure, bias, and laser conditions all affect the result and should be represented appropriately.
Conclusion
Pulsed laser SEE simulation is most useful when it connects optical energy deposition to semiconductor charge transport. FDTD can model the pulse and its interaction with the material, including nonlinear absorption and free-carrier effects; TCAD can then calculate the electrical response from the generated-carrier distribution. For teams evaluating microelectronic SEE behavior, this integrated approach offers a physics-based way to interpret laser tests while keeping simulation assumptions visible and results grounded in measurement.