Quantum computer scalability is not simply a matter of placing more qubits on a chip. A useful system must also connect, control, and preserve those qubits in a way that can be manufactured and operated as the system grows. The history of semiconductor manufacturing offers a framework for thinking about this challenge: successful scale-up depends on architecture, materials, function, and measurable engineering progress.
Why a qubit chip is not the whole computer
At first glance, an integrated qubit chip can resemble a conventional planar semiconductor circuit. Both use organized structures on a solid surface, suggesting that similar manufacturing approaches might support larger systems. But the chip is only one part of many quantum computer demonstrations.
In the configurations described in the source material, the qubit chip is mounted within a larger assembly sometimes compared to a chandelier. The structure connects cryogenically cooled components to control electronics and, ultimately, room-temperature electronics. This three-dimensional arrangement may be workable for a small prototype, but it raises a different scaling problem from adding components to a planar chip.
Increasing the qubit count substantially would also increase the complexity of the associated support and connection structure. Like an early flying-wire integrated circuit, which used wires suspended above the chip to connect components, a large, mechanically intricate assembly could be difficult to manufacture and vulnerable to component failure. The implication is important for system integrators and hardware designers: a scalable chip does not automatically make a scalable computer. The complete architecture must be considered.
Quantum computer scalability and the semiconductor lesson
Semiconductor progress involved more than putting additional transistors on a fixed-size chip. As integrated circuits evolved, transistor dimensions shrank, allowing more components to fit within a similar area. This helped improve the cost and complexity of chips over successive generations and became associated with Moore’s law.
The broader lesson is that scale-up requires engineering improvements across generations, not just a higher component count. Early manufacturing decisions affect cost, yield, reliability, and the complexity of the finished system. These considerations remain relevant when assessing quantum computing hardware, even though qubits operate according to different principles than transistors.
Quantum computers may offer exponential performance improvements for some problems, but that possibility should not be confused with an automatic exponential improvement in hardware. A quantum processor might advance through generations that add qubits or improve their precision. Whether either path can be sustained depends on the underlying design and manufacturing processes. The potential advantage of a computation does not, by itself, establish that the machine can be built at a useful scale.
Materials and qubit reliability
Semiconductor history also shows how material properties can influence which technologies scale. Bipolar transistors initially offered speed and size advantages, but persistent defect challenges limited their manufacturing prospects compared with metal-oxide semiconductor, or MOS, devices.
Qubit technologies face their own materials questions. Josephson junction, or transmon, qubits and quantum dot qubits are among the approaches being developed. All qubits are subject to decoherence: a loss of quantum information when interactions with their surroundings disrupt the engineered quantum state. Material impurities can contribute to this problem by acting as unintended, parasitic qubits that couple to the designed qubits and produce errors.
This makes materials quality a system-level concern. A design that performs well in a small prototype may face different challenges when more components and connections are introduced. The amount by which decoherence can be reduced remains uncertain, so it is not yet clear which qubit approach will prove most scalable over the long term. For technical decision-makers, this reinforces the need to evaluate materials, device performance, and manufacturing together rather than treating them as separate questions.
Engineering criteria for scale-up
Semiconductor scaling involved a broad set of practical factors, including cost, reliability, yield, complexity, die size, interconnection space, heat, speed, power density, and design automation. Quantum systems need their own well-defined engineering objectives, while retaining the discipline of evaluating the whole system.
The DiVincenzo criteria provide widely accepted objectives for gate-based quantum computers. They call for:
- A scalable physical system with well-characterized qubits.
- The ability to initialize qubits to a known, simple state.
- A universal set of quantum gates.
- Relevant decoherence times that are much longer than gate-operation times.
- The ability to measure individual qubits.
These requirements connect quantum information processing to practical hardware design. A system must support useful operations and measurements while keeping quantum states intact long enough for those operations to matter. The criterion of a scalable physical system also makes clear that scalability is not an optional feature to address after the qubits are developed; it is part of the design problem.
Benchmarks that reflect engineering progress
Conventional computing roadmaps often track measures such as memory density or clock rate. For early quantum computers, a single smooth trend line may not adequately represent progress because systems can target different uses and rely on different architectures.
A more useful benchmarking approach can distinguish among system-level, gate-level, and device-level measures, as well as between gate-based quantum computers, quantum annealers, and classical computers used for reference. Candidate measures include quantum volume and quantum speedup at the gate level, decoherence time at the device level, and system-level metrics that still need to be developed. Some measures are not yet defined or agreed upon.
For engineers and operators, agreed benchmarks would help separate progress in an individual device from progress in a complete, functional system. They could also support more meaningful comparisons across technologies. Until metrics are developed and accepted, claims about scale-up should be interpreted in the context of what is being measured.
Practical implications for quantum hardware development
Current small-scale prototypes and proposed large systems are separated by substantial engineering challenges. Research and development must improve qubit designs and reduce the resources required to realize useful systems. At the same time, designers need to address the physical architecture that links qubits to control electronics, the materials that affect decoherence, and the manufacturing processes needed to produce reliable hardware.
The semiconductor experience does not guarantee that quantum computers will scale, nor does it identify a single winning qubit technology. It does offer a disciplined way to frame the work: assess manufacturability, function, materials, reliability, and cost together, and use benchmarks suited to the technology’s maturity.
For industrial automation leaders and technical decision-makers, the central takeaway is to evaluate the complete quantum computing system rather than the qubit chip alone. Scalable quantum hardware will require coordinated progress in device design, supporting infrastructure, manufacturing, and measurement. Clear engineering criteria and shared benchmarks can help distinguish promising prototypes from architectures capable of growing into practical systems.